Product images are for illustrative purposes only. Actual products may vary slightly from those shown.

Barrettine Wood Protective Treatment

Product code:65056336
In Stock Check Stock By Store
x
Inverness Depot5
From £41.98 (£34.98 +VAT)
Delivery From £6.95 or free collect from Store

Delivery Rates

Mainland£6.95
Non-Mainland£18.95
Shetland£27.75
Collection£0.00
Barrettine’s Wood Protective Treatment is a wood sealer for rough, sawn or smooth timber. It contains water-repellent resins that help reduce decay, swelling, and twisting of wood. The pigments of the coloured wood sealant have good UV fade resistance and help give long-life protection from UV damage. (No pigments in Clear option)

Barrettine’s Wood Protective Treatment is an ideal treatment for outdoor Treated timber structures such as Sheds, Fences, Trellis, Pergola and timber Gazeboes. As a wood sealer, it provides excellent water repellency/beading. Oil / Spirit-based for deeper penetration leaving a transparent/translucent finish colour effect to wood, where the grain texture is still visible. (Not ideal for decking or garden furniture structures as rub resistance may not be sufficient).
Safety Data Sheet
Technical Data Sheet
    Quantity
    Remove Add
    • UV Fade Resistant Colour Wood Stains / Pigments
    • Deep Penetrating Oil/Spirit Low Odour Formula
    • Harmless To Beneficial Insects & Plants When Dry
    • For use on most external pretreated timbers; (refer to tin/container).
    • Contains film biocide preserver to prevent a surface growth of mould /algae.
    • Suitable for rough, sawn or smooth timber, but not suitable for garden furniture unless over sealed.
    • Harmless to plants and pets when dry.
    • Oil/solvent based for deeper penetration.
    • Low odour ready to use formulation.
    • Superb quality water repellent resins.
    • UV fade resistant colour pigments.
    • High level, long lasting protection.
    • For unpreserved/untreated timber we recommend using Barrettine Universal Preserver first as a primer.

    Can be sprayed using an airless sprayer such as a Wagner or Graco ideally using a minimum 1mm flat fan tip nozzle (9 - 11 thou tip). The sprayer must be thoroughly cleaned after application with white spirit and then oiled to protect the tip and moving parts (as per manufacturer’s instructions). This product cannot be sprayed with a traditional pump action garden sprayer.


    • Ensure wood to be treated is dry, free from dirt and repellent coatings such as paint or varnish. (remove and sand down as required).
    • Recommend using a biocidal wash such as Barrettine Knockout Mould and Mildew prior to treatment.
    • The final colour finish can vary considerably due to the age, type & condition of the timber being treated. We always recommend carrying out a test area first in an inconspicuous area to make sure you are happy with the final dried colour.
    • Brush, dip, roller or spray in suitable conditions. (When used outdoors make sure weather conditions are dry and still).
    • Coverage: 180ml per m2 or 1 litre to 5-6 sq metres.
    • Drying times: 12 hours under normal conditions (20°C/65% rel. humidity).
    • Best results - recommend 2-3 applications/coats.
    • Clean equipment with Barrettine White Spirit.
    • Always read the label. Use biocides safely.

      Bought Together and Related Items


      Customer reviews


      No customer reviews have been written for this product yet.
      Your email address!
      Your Post Code!
      Would you like to add additional information?
      ADD TO QUOTE BUILDER Request Now
      X
      X