V61 Brick-to-Timber Stainless Steel Wall Ties (QTY 250)
Product code: Select Options
Select Options
x
| Turriff Depot | 4 |
| Elgin Depot | 5 |
| Fort William Depot | 5 |
| Dundee Depot | 6 |
| Kirkwall Depot | 12 |
| Inverness Depot | 28 |
From £42.84 (£35.70 +VAT)
£6.95
Or Free Collection From Store
This type of timber frame wall tie is right for domestic and small commercial builds up to four storeys high.
They are suitable for buildings with a maximum height if 15m and for flat sites where the basic wind speed is up to 25m/s and altitude is not greater than 150m above sea level.
Available in 3 sizes:-
125mm for 50mm cavity
150mm for 75mm cavity
225mm for 100mm cavity
Supplied complete with 50mm x 3.35mm Stainless Steel Annular Ring Nails.
A datasheet can be downloaded via the link below.
- Size
Size:Select
Quantity:
- Designed and tested in accordancewith BS EN 845-1 and DD140:PART 2, TYPE 6 wall ties.
- Suitable for use in timber frame structures, allowing up to 24mm movement.
- 0.5mm stainless steel.
- Design – Masonry-timber tie for timber frame buildings that accommodates vertical movement.
- Material – Manufactured from grade 304 stainless steel
- Behaviour in relation to fire – non combustible (as defined in the national Building Regulations)
- Durability – excellent corrosion resistance and a service life of not less than 60 years
- Thermal performance – In situations where thermal losses through ties need to be taken into account, the products will adequately resist thermal transmittance through a wall cavity
- Compliance – Tested as Type B (sound) and as Type 6 (strength) to BS EN 845-1
Similar Products
H2.5A High Wind Tie£1.81 (£1.51 +VAT)Quick Look
Framing Anchor A35£1.08 (£.90 +VAT)Quick Look
Request Quotation
Request Now
Recently Viewed
Bohler 6013 Mild Steel Electrodes Quick Look
Stanley Surform Moulded Body Shaver Tool Quick Look














