Aico Ei3024 Multi-Sensor Fire Alarm

Product code: 90011292

In Stock Check Stock By Store
Elgin Depot1
Inverness Depot2
£70.67 (£58.89 +VAT)
Delivery Truck Logo


Or Free Collection From Store

Smoke alarms have different sensors to detect different fire types. With the Ei3024 Multi-Sensor Fire Alarm sensor choice is simple as this alarm provides total fire coverage. Its combination of a Heat and an Optical sensor means that it can detect all fire types.

The Ei3024 Multi Sensor Fire Alarm uses combined Optical and Heat sensors to detect all fire types with an increased resistance to false alarms.

The Ei3024 Multi-Sensor Fire Alarm is SmartLINK compatible, Simply plug in an Ei3000MRF module for wireless interconnection, data extraction and real-time notifications of alarm activations and events via the SmartLINK Gateway and Portal.

Ei3024 Data Sheet


  • Contains both an Optical and Heat sensor for a total fire response
  • Mains powered with 10 year rechargeable lithium cell back-up
  • Add an Ei3000MRF module for wireless interconnection and data extraction
  • Compatible with other Aico mains powered units
  • AudioLINK data extraction technology
  • Dust compensation – unique self monitoring mechanism
  • easi-fit base
  • 10 year life
  • Built in sounder giving a minimum sound output of 85dB (A) at 3m. The sounders contacts are soldered directly on to the piezo disc for additional security
  • Manual integral Test/Hush button tests circuitry, sensor and horn and activates all interconnected alarms in the system. Also operates ‘Hush’ feature to silence nuisance alarms. Red LED on alarm cover will flash every 10 seconds to indicate that alarm is in ‘Hush’ mode and will automatically reset after approximately 10 minutes
  • Automatic Self-Test: Optical sensor is tested every 40 seconds and unit bleeps if a fault is detected
  • Ambient Temperature Range: 4°C to 40°C
  • Humidity Range: 0 to 90 % relative humidity
  • Dimensions: 115 x45mm
  • Weight inclusive of packaging: 200g
  • The Smoke Alarm carries the VdS mark to indicate type testing to BS EN14604: 2005
  • It will meet the requirements of Grade F as defined in BS 5839: Pt.6: 2013
  • It carries the CE mark to indicate conformance to Low Voltage and Electromagnetic Compatibility Directives
  • Optical (photoelectric) sensor with chamber and large high sensitivity photodiode. Insect resistant fine mesh screen with holes less than 0.030 inches
  • The Alarm is powered by a 9V PP3 Alkaline battery (supplied). The unit is activated when the battery is connected to the snap fit connections. The battery should be replaced every 12 months, or when the unit starts to beep every 40 seconds along with a red indicator light
  • Up to 12 units can communicate on one system – the range may be a limiting factor
  • Low battery warning signal, bleeps every 40 seconds for 30 days to indicate when replacement of the alarm is required
  • Customer reviews

    No customer reviews have been written for this product yet.

    Request Quotation

    Request Now