Veritas Products

Below are our Veritas products. You can click on each product to view a full description and specification.

Sorting products...Sorting products...

Veritas 3pc Imperial Plug Cutter Set

Veritas 3pc Imperial Plug Cutter Set

Sometimes when plugging holes, no matter how carefully drilled, the holes finish up slightly oversize for the plug, especially in soft woods. These cabinet maker's snug plug cutters overcome this by cutting a slightly tapered plug. The first 3mm of the plug is the diameter stated whilst the remaining length is then flared out at an angle of 3°. Just tap the plug into place until you meet resistance then cut off the excess. Also, unlike regular plug cutters which have two cutting flutes, these plug cutters have four, giving a much cleaner cut and a smooth-sided plug which fits perfectly every time and is practically invisible. For best results use in a drill press or power drill stand. Snug plug cutters cut a slightly tapered plug Available in metric and imperial sizes Flares out at 3° angle Four cutting flutes Available in sets of 3

Price:£31.31£37.57

Veritas 3pc Metric Plug Cutter Set

Veritas 3pc Metric Plug Cutter Set

Sometimes when plugging holes, no matter how carefully drilled, the holes finish up slightly oversize for the plug, especially in soft woods. These cabinet maker's snug plug cutters overcome this by cutting a slightly tapered plug. The first 3mm of the plug is the diameter stated whilst the remaining length is then flared out at an angle of 3°. Just tap the plug into place until you meet resistance then cut off the excess. Also, unlike regular plug cutters which have two cutting flutes, these plug cutters have four, giving a much cleaner cut and a smooth-sided plug which fits perfectly every time and is practically invisible. For best results use in a drill press or power drill stand. Snug plug cutters cut a slightly tapered plug Available in metric and imperial sizes Flares out at 3° angle Four cutting flutes Available in sets of 3

Price:£32.14£38.57

Veritas Dovetail Saw

Veritas Dovetail Saw

The saw's spine is permanently moulded onto the back of the blade. It imparts just the right amount of weight to the blade to carry the saw effortlessly into the cut. The polished hardwood handle is shaped to fit the hand comfortably and not just to look pretty, which it also does. In fact the handle is very reminiscent of the rear tote on a bench plane and this theme is carried on in the steel rod and brass nut used to attach the handle onto the spine. A mortice and tenon joint between handle and back ensures a good solid and secure fixing between the two parts Spine permanently moulded onto the blade Right amount of weight to carry the saw effortlessly into the cut Ensures control where accuracy is most important Polished hardwood handle is shaped to fit the hand comfortably Mortice and tenon joint between handle & back for solid and secure fixing Japanese high carbon steel blade, 230mm (9") long by 40mm (1.1/2") deep Razor sharp 14tpi teeth Overall weight is 360g (12.7oz)

Price:£47.45£56.94

Veritas DX60 Block Plane

Veritas DX60 Block Plane

The knobs and wheel have elegant elliptical knurled edges for a firm grip. The lever cap has been extensively redesigned to integrate cleanly with the plane body and provide an almost continuous hand contact surface, with tactile cues for finger placement. Body made of ductile cast iron, fully stressed relieved All knobs and adjusters made from stainless steel Accurately machined and surface ground Sole is flat, sides square to the sole, bed flat and square to the sides Maximum deviation within 0.038mm (0.0015") Adjustable mouth with re-set stop 180mm (7") long by 44mm (1.3/4") wide plane with 12° bed angle 35mm (1.3/8") wide A2 tool steel blade 3.6mm (9/64") thick, hardened to HRC 60-62

Price:£163.84£196.61

Veritas Fine Tooth Dovetail Saw

Veritas Fine Tooth Dovetail Saw

For woodworkers who prefer a fine-tooth dovetail saw, Veritas produce a premium example with a 20 teeth per 25mm (20tpi blade) filed for rip cutting. It has a 235mm (9.1/4") long by 0.5mm thick high-carbon steel blade. The teeth have a rake angle of 14°, and an included angle of 60°. The depth of cut is about 40mm (1.9/16").The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid one-piece blade/spine/mount assembly. The material used for the back incorporates stainless-steel powder for weight, glass fibre for stiffness, and a polymer resin binder. A brass nut fastener secures the comfortably shaped Bubinga handle. The saw has great balance it cuts easily, stays true and the pistol grip helps make the saw feel like an extension of your arm. Overall length 360mm (14.1/4") Premium fine-tooth dovetail saw 20 teeth per 25mm (20tpi blade) 235mm (9.1/4") long by 0.5mm thick high-carbon steel blade Injection moulded back creates a solid one-piece blade/spine/mount assembly Brass nut secures comfortable Bubinga handle Saw cuts easily and stays true Overall length 360mm (14.1/4")

Price:£46.31£55.57

Veritas Flush Plane

Veritas Flush Plane

At only 240g, it can be carried in a pouch, pocket, or loosley stored in a toolbox without fear of damaging the edge. 50mm(2") wide Flush chisel - multitude of flush trimming uses Unrestricted travel to centre of widest boards Reversible blade to protect edge when not in use

Price:£29.21£35.05

Veritas Medium Shoulder Plane

Veritas Medium Shoulder Plane

Veritas Medium Shoulder Plane. Multi-purpose tool Can be used on end grain (e.g., trimming tenon shoulders) Unique lever cap with a pivoting knob Supplied with a lapped blade in A2 tool steel

Price:£141.31£169.57

Veritas No. 4 1/2 Smoothing Plane

Veritas No. 4 1/2 Smoothing Plane

For final smoothing on surface already worked by other planes. An excellent plane for the final smoothing of a surface already worked by other planes or a thickness planer. It is 254mm(10") long and 73mm(2.7/8") wide and is available with a 60mm(2.3/8") wide lapped blade in A2. At just over 2.26kg(5lb.), it has the mass needed for an effective smoother.

Price:£224.80£269.76

Veritas No. 5 1/4 Bench Plane

Veritas No. 5 1/4 Bench Plane

The No.5 1/4 was often referred to as a junior jack. At 305mm(12") long, it fell between the No.4 smooth plane at 254mm(10") long and the No.5 jack at 355mm(14") long. The Veritas version varies from the traditional No.5 1/4, the two most significant dimensional differences are the Veritas No.5 1/4 has a 50mm(2") wide blade (rather than 45mm(1.3/4") and the mouth is 238mm(4.3/8") back of the nose compared with 89mm(3.1/2") for the original. This extra length of sole in front of the blade makes it much easier to cut accurately because the extra-long nose makes it easier to maintain the sole flush to the material at the start of a cut. In fact, the combination of the mouth location and the very sensitive feed adjustment lets this plane serve as a jointer for most cabinet work. The No.5 1/4 is an ideal complement to the No.4 1/2 for bench work. It is made from ductile cast iron and has the same adjustable frog with a combined feed and lateral adjust mechanism that is sturdy, yet sensitive and accurate. The easily adjusted frog is machined to fit snugly in the plane body and, combined with the 3.2mm(1/8") thick blade, eliminates virtually all blade chatter. As the frog extends right through to the sole, adjusting the frog to narrow the mouth does not reduce blade support as it does in standard planes of this style. Weighs just under 2.26kg(5 lb.). It is supplied with an A2 50mm(2") wide lapped blade, an O1 Tool Steel blade is also available. A jointer for most cabinet work Made from ductile cast iron Adjustable frog with combined feed and lateral adjust mechanism

Price:£214.50£257.40

Veritas Small Crosscut Saw

Veritas Small Crosscut Saw

Veritas has merged modern materials and traditional design to create this well balanced, excellent cutting crosscut saw. The 9-1/4” high-carbon steel blade has crosscut configured teeth @ 16 tpi, with a rake angle of 15 degrees. The blade's spine is made from high-pressure injected molded resin, with stainless steel powder & glass fibers resulting in a strong and stiff backer that keeps the blade straight & true. Patterned from antique saws with elegantly curved handles, the saw's solid bubinga handle nestles into your hand to give you exceptional cutting control. Depth of cut is 1-9/16”. OAL is 14”. 0.5mm thick high-carbon steel with 16 teeth per 25mm (16tpi) Injection moulded back creates a solid one-piece blade/spine/mount assembly Brass nut secures comfortable Bubinga handle Saw cuts easily and stays true Overall length 360mm (14.1/4")

Price:£46.31£55.57

Veritas Smoothing Plane Sack - 300mm

Veritas Smoothing Plane Sack - 300mm

Veritas Smoothing Plane Sack - 300mm Silicone-treated knit cotton that resists moisture Keeps dust and dirt off the planes and helps deter rust development Protection for expensive planes and other tools

Price:£8.47£10.16

Veritas Standard Block Plane Sack

Veritas Standard Block Plane Sack

Silicone-treated knit cotton resists moisture - ideal for plane storage. Designed much like a tube sock with a drawstring closure to keep dust and dirt off the planes and help deter rust. Outer tag to label the plane inside. The 7-1/2" length fits our block, apron, chisel, bullnose, medium shoulder, side rabbet, edge-trimming and small router planes.

Price:£8.95£10.74

Veritas Tapered Snug Plug Cutters

Veritas Tapered Snug Plug Cutters

Sometimes when plugging holes, no matter how carefully drilled, the holes finish up slightly oversize for the plug, especially in soft woods. These cabinet maker's snug plug cutters overcome this by cutting a slightly tapered plug. The first 3mm of the plug is the diameter stated whilst the remaining length is then flared out at an angle of 3°. Just tap the plug into place until you meet resistance then cut off the excess. Also, unlike regular plug cutters which have two cutting flutes, these plug cutters have four, giving a much cleaner cut and a smooth-sided plug which fits perfectly every time and is practically invisible. For best results use in a drill press or power drill stand. Snug plug cutters cut a slightly tapered plug Available in metric and imperial sizes Flares out at 3° angle Four cutting flutes

Price:£11.64£13.97