Trend Products

Below are our Trend products. You can click on each product to view a full description and specification.

Sorting products...Sorting products...

Bradawl Only For Hinge Jig

Bradawl Only For Hinge Jig

Bradawl Only For Hinge Jig Does not include nylon spacers

Price:£4.20£5.04

Chamfer 45 degrees x 12.7mm diameter

Chamfer 45 degrees x 12.7mm diameter

Chamfer 45 degrees x 12.7mm diameter. For veining, panelling, 'V' grooving, bevelling & chamfering Self-guiding chamfer/bevel cutter. Bearing follows the board beneath.

Price:£12.50£15.00

Chamfer Angle 45 Degrees

Chamfer Angle 45 Degrees

Chamfer Angle 45 Degrees Two flute cutters for producing extra clean cut bevelled edges.

Price:£19.21£23.05

Chamfer Angle 60 Degrees

Chamfer Angle 60 Degrees

Chamfer Angle 60 Degrees Two flute cutters for producing extra clean cut bevelled edges.

Price:£14.28£17.14

Trend Straight Cutter 1/2in

Trend  Straight Cutter 1/2in

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

Price:£12.07£14.48

Trend 2000W 1/2" Variable Speed Workshop Router

Trend 2000W 1/2" Variable Speed Workshop Router

Electronic full wave variable control of spindle speed under load for a fine finish on all types of material. Soft start eliminates sudden movement of machine on start up. Two column precision base with large phosphor bronze bushes for plunging accuracy. Spindle lock and hex collet nut results in easy cutter changes with the 22mm spanner supplied. Adjustable twin rod parallel side-fence guide with integral micro-adjuster for straight edge work. Precision machined one-piece multi-slit collet for fail-safe grip of cutter shank. 3-position revolving depth stop for fast adjustable settings. Adjustable inner plate for guide bush accuracy. Router fine height adjuster for above and below height adjustment. One revolution of the handle equals 1.5mm. Three quick release recesses in base to fit tables in conjunction with optional Quick Release Kit. Fittings for optional Clamp Guide System Kit. Extra large base aperture for large cutters. Quick release dust spout. Ideal for site use. All 115v routers over 1850W require a 32A BS4343 115v plug. Minimum generator or transformer requirement 3 kVA continuous with a 32A BS4343 115v socket outlet. 115v units cannot be used on the no-volt release switch CRT/L and PRT/L router tables.

Price:£259.00£310.80

Trend 3D Bit

Trend 3D Bit

The effective tool for electricians, plumbers, carpenter and locksmiths. Ideal for installation and renovation work. Makes holes in wood and other soft materials twice as fast as any other drill. Has sharp cutting edges in three directions. Ideal for cutting straight or curved channels, recesses for cables and pipework and creating a mortise for locks. Faster drilling. Cleaner holes. Can be resharpened

Price:£10.50£12.60

Trend 46/290x1/2in Bearing Guide Cutter

Trend 46/290x1/2in Bearing Guide Cutter

Trend 46/290x1/2in Bearing Guide Cutter Self-guiding cutters with the facility to change the profile by fitting a larger bearing & varying the depth.

Price:£66.55£79.86

Trend 46/70 X 1/4in Bearing Guide Cutter

Trend 46/70 X 1/4in Bearing Guide Cutter

Trend 46/70 X 1/4in Bearing Guide Cutter Self-guiding cutters with the facility to change the profile by fitting a larger bearing & varying the depth.

Price:£38.00£45.60

Trend 550w Variable Speed Router 110v

Trend 550w Variable Speed Router 110v

Soft-start feature eliminates sudden movement of machine on start up. Spindle lock & hex collet nut allows easy cutter changes. Precision machined one piece multi-slit collet with combined nut. Compact design & low weight make it easy to use especially for intricate work. Adjustable twin rod side-fence for guiding along a straight edge. New features include: increased power, soft grip handles, low profile dust spout and ergonomic spindle lock.

Price:£79.16£94.99

Trend 550w Variable Speed Router 240v

Trend 550w Variable Speed Router 240v

Soft-start feature eliminates sudden movement of machine on start up. Spindle lock & hex collet nut allows easy cutter changes. Precision machined one piece multi-slit collet with combined nut. Compact design & low weight make it easy to use especially for intricate work. Adjustable twin rod side-fence for guiding along a straight edge. New features include: increased power, soft grip handles, low profile dust spout and ergonomic spindle lock.

Price:£70.78£84.94

Trend Airshield Pro Respirator 230V

Trend Airshield Pro Respirator 230V

Battery powered respirator for use with all woodworking applications. Suitable for use when machining MDF. Approved to new standard BS EN 12941. New features include: Combination face-seal and hood to improve protection. Motor positioned away from the sensitive area of the forehead to reduce noise and irritation. Attachment points for optional ear defenders. Strategic component distribution ensure optimum centre of gravity is achieved for balance and comfort. Twin filters with efficiency of 98%, more than double the Airshield MK1. Audible low battery warning. Removable 8 hour Ni-MH battery.

Price:£206.95£248.34

Trend Aquamac 21 Recesser 46.3mm Diameter

Trend Aquamac 21 Recesser 46.3mm Diameter

Trend Aquamac 21 Recesser 46.3mm Diameter. Recessing cutter will accommodate the Schlegel Aquamac 21 seal. This cutter is designed for use with the Aquamac seal in a wiping mode and comes complete with a guide bearing to reduce setting-up time and simplify machining operations

Price:£40.20£48.24

Trend Bearing Guided Classic Cutter

Trend Bearing Guided Classic Cutter

Trend Bearing Guided Classic Cutter Self-guiding cutters with the facility to change the profile by fitting a larger bearing & varying the depth.

Price:£41.06£49.27

Trend Bearing Guided Classic Panel 6.3mm Radius

Trend Bearing Guided Classic Panel 6.3mm Radius

Trend Bearing Guided Classic Panel 6.3mm Radius Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool.

Price:£32.13£38.56

Trend Bearing Guided Cove Cutter 12.7mm Radius

Trend Bearing Guided Cove Cutter 12.7mm Radius

Trend Bearing Guided Cove Cutter 12.7mm Radius. The two bearings supplied offer the means of cutting different depths of mouldings.

Price:£45.56£54.67

Trend Bearing Guided Cove Cutter 9.5mm Radius

Trend Bearing Guided Cove Cutter 9.5mm Radius

Trend Bearing Guided Cove Cutter 9.5mm Radius. The two bearings supplied offer the means of cutting different depths of mouldings.

Price:£38.84£46.61

Trend Bearing Guided Ovolo Cutter 1/4in

Trend Bearing Guided Ovolo Cutter 1/4in

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.

Price:£34.42£41.30

Trend Bearing Guided Round Over Ovolo 16mm Radius

Trend Bearing Guided Round Over Ovolo 16mm Radius

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece.

Price:£25.98£31.18

Trend Biscuit Jointer Set

Trend Biscuit Jointer Set

For biscuit jointing of timber, man-made fibre and particle board with the router. The set includes three sizes of bearing which set the correct depth of cut for the three sizes available. A slightly longer cut than the length of the biscuit is required to allow some lateral play for easy alignment during assembley. A water based glue (PVA) is used with the biscuits which will expand as the moisture is absorbed. Boards are simply clamped together until glue is cured. For larger boards, biscuits can be doubled up by making two passes.

Price:£41.99£50.39

Trend Biscuits (100)

Trend Biscuits (100)

Trend biscuits are made of die cut beech. Beechwood biscuits which expand when in contact with a woodworking adhesive such as PVA glue. They are ideal for strong, fast, and accurate jointing of hard and soft woods, plywood and composition board. Compared to doweling, biscuit jointing is faster and more precise.

Price:£5.90£7.08

Trend Biscuits No 20 (1000)

Trend Biscuits No 20 (1000)

Trend biscuits are made of die cut beech. Beechwood biscuits which expand when in contact with a woodworking adhesive such as PVA glue. They are ideal for strong, fast, and accurate jointing of hard and soft woods, plywood and composition board. Compared to doweling, biscuit jointing is faster and more precise.

Price:£26.00£31.20

Trend Bushing Washer

Trend Bushing Washer

Accurately machined with reamed bores and splined outside edges for a precision fit into the blade bore. Extra care must be taken when mounting sawblades onto a saw spindle when using bushing washers. Diameter: 300mm

Price:£2.72£3.26

Trend Chamfer V Groove Cutter

Trend Chamfer V Groove Cutter

Trend Chamfer V Groove Cutter. For veining, panelling, 'V' grooving, bevelling & chamfering.

Price:£20.14£24.17

Trend Circular Sub-Base Set

Trend Circular Sub-Base Set

Trend Circular Sub-Base Set Suitable for : Dewalt DW620, 621, 624, DW625EK,629 Elu OF97(E) & MOF131, 177(E) Bosch GOF 1600A, 1700ACE Makita RP0910,0111C B&Q CLM2050R, 1250R >11/03

Price:£22.10£26.52

Trend Clamp Guide System

Trend Clamp Guide System

For accurate guiding of router, saws and jigsaws. Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten. Sliding jaw has 'click' feature that allows the jaw to move freely without the metal clamp jaws catching and marking the clamp rod. Patent No. US6,622,997. Router not included.

Price:£32.50£39.00

Trend Collet for DeWalt

Trend Collet for DeWalt

Trend Collet for DeWalt. Fits the following machines:- Elu MOF112, 31, 77, 98, 131, 177(E) DeWalt DW624, DW625EK, 629 CMT 1E

Price:£22.10£26.52

Trend Collet for Hitachi 1/2in

Trend Collet for Hitachi 1/2in

Trend Collet for Hitachi 1/2in Does not include the collet nut. To fit the following machines:-Hitachi TR12, M12V, M12SA

Price:£26.80£32.16

Trend Collet for Makita

Trend Collet for Makita

Replacement collets for routers with capacities and sizes to match trend Cutters and arbors. Does not include the collet nut. Suitable for the following - Makita 3600B, 3601B, 3612BR, 3612C & 3612

Price:£9.00£10.80

Trend Collet Sleeve 8mm To 12.7mm

Trend Collet Sleeve 8mm To 12.7mm

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensive periods or heavy work

Price:£9.00£10.80

Trend Combination Angle Gauge

Trend Combination Angle Gauge

Enables external and internal angles to be read direct from a scale. Divides top angle in two without changing the setting. Ideal for measuring angles when mitre cutting large boards, fillets and architraves.

Price:£47.80£57.36

Trend Corner Bead 3.2mm Radius

Trend Corner Bead 3.2mm Radius

Trend Corner Bead 3.2mm Radius. Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. For panel and veining work. Ideal for barley twists using the Routerlathe.

Price:£26.35£31.62

Trend Corner Bead 7.5mm Radius

Trend Corner Bead 7.5mm Radius

Trend Corner Bead 7.5mm Radius For panel and veining work. Ideal for barley twists using the Routerlathe.

Price:£29.07£34.88

Trend Corner Chisel HSS

Trend Corner Chisel HSS

Trend Corner Chisel HSS Allows a rounded recess in wood to be cut to a square recess with the use of a hammer.

Price:£11.90£14.28

Trend Cove Cutter 1/2in 12.7mm

Trend Cove Cutter 1/2in 12.7mm

Trend Cove Cutter 1/2in 12.7mm For coves and part of a rule joint.

Price:£42.42£50.90

Trend Cove Cutter 1/2in 9.5mm

Trend Cove Cutter 1/2in 9.5mm

Trend Cove Cutter 1/2in 9.5mm. For coves and part of a rule joint.

Price:£46.41£55.69

Trend Cove Cutter 1/4in

Trend Cove Cutter 1/4in

Trend Cove Cutter 1/4in For coves and part of a rule joint

Price:£36.21£43.45

Trend Craftsman Router Table MK2 240V

Trend Craftsman Router Table MK2 240V

It is packed with the necessary features to maximise the versatility of all popular portable routers. Large aluminium table with parallel ribs over full surface. Extension surface extends the width of table by over 400mm. Parallel adjustment system of backfence together with measrement strips. Fixing plate system beneath table. Plate must be ordered seperately. High back fence. Sliding tenon push block for producing tenons. Router not included.

Price:£169.50£203.40

Trend Door Holder Stand

Trend Door Holder Stand

Holds door on its edge while routing hinge recess & mortise for locks. Holds door securely. Non-scratch base. Adjustable clamp for doors 32mm to 55mm thick. Allows door to be tilted back to assist fitting into frame. Maximum door weight 50kg.

Price:£35.00£42.00

Trend Dovetail Cutter

Trend Dovetail Cutter

To suit user preference, the table shows angles from the horizontal and the profiles show angles from the vertical. These dovetail cutters produce a tight reliable joint for drawers, boxes etc.

Price:£11.64£13.97

Trend Dovetail Cutter 12.7mm Diameter 104 Degrees

Trend Dovetail Cutter 12.7mm Diameter 104 Degrees

To suit user preference, the table shows angles from the horizontal and the profiles show angles from the vertical. These dovetail cutters produce a tight reliable joint for drawers, boxes etc.

Price:£11.64£13.97

Trend Fast Track Sharpener Kit

Trend Fast Track Sharpener Kit

Trend Fast Track Sharpener Kit, Portable hand operated honing system giving guaranteed razor fine edges every time. Easy to use with no set up time required. Safe - simple - quick to use. Unique lateral sharpening action gives superb finished edge. Built to last. Machined in solid aluminium and anodised. Quick change magnetic lock diamond sharpening stones. Carriage runs on nylon 66 slip rails for a smooth action. Learn how to create micro secondary honing angles for an ultimate fine edge- prolongs tool life. Quick change sharpening angles 25 degree for primary and 30 degree for secondary. Optional accessory stones available. Can be used with lapping fluid. Patent No. GB2364943

Price:£55.70£66.84

Trend Fine Head Adjuster

Trend Fine Head Adjuster

This fine height adjuster simply fits onto the router and allows fine adjustment of the cutter height. A concise range of F-Style quick action gripper clamps for a variety of clamping applications. Zinc plated steel bar with cast steel head and jaw. Soft grip handle for better grip and more clamping force. Removable pad to provide grip on work surfaces and reduce workpiece marking. Ball joint swivel clamping jaw. Groove in the serrated bar to allow easier sliding of moving jaw.

Price:£12.60£15.12

Trend Gb Screws 2ba X1/4 Pack Of Ten

Trend Gb Screws 2ba X1/4 Pack Of Ten

A pack of ten screws (2BAx1/4 ) for attaching standard guide bushes to a router base.

Price:£2.40£2.88

Trend Grabit Remover

Trend Grabit Remover

This versatile double-ended bit removes damaged screws, machine screws and broken bolts from wood, metal and plastic. It can remove screw sizes from Nos. 6 - 14 and broken bolts from size M4 - M8. Removes cleanly from wood, metal or plastic. Hardened tool steel. Removes screws made of any alloy including soft brass. Removes free spinning screws. Winslow tip for self centring. Double-ended (burnisher & tapered thread). Hex shoulder to aid removal of jammed screw or bolt. Patent Nos. WO2004002687 & US6,761,089 Set of two.

Price:£11.64£13.97

Trend Guide Bush

Trend Guide Bush

Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.

Price:£6.90£8.28

Trend Guide Bush Collar 16mm to 30mm

Trend Guide Bush Collar 16mm to 30mm

Enables single shaped templates to be used to cut perfectly matching pocket & inlay. Collars have integral rubber 'O' rings to ensure collar secures onto guide bush. Templates should be made with suitable sized corners for the collar being used. The correct diameter straight cutter as indicated should always be used.

Price:£5.30£6.36

Trend Guide Bush Collar 20mm to 40mm

Trend Guide Bush Collar 20mm to 40mm

Enables single shaped templates to be used to cut perfectly matching pocket & inlay. Collars have integral rubber 'O' rings to ensure collar secures onto guide bush. Templates should be made with suitable sized corners for the collar being used. The correct diameter straight cutter as indicated should always be used.

Price:£5.30£6.36

Trend Guided Cove Cutter 15.9mm Diameter

Trend Guided Cove Cutter 15.9mm Diameter

Trend Guided Cove Cutter 15.9mm Diameter The two bearings supplied offer the means of cutting different depths of mouldings.

Price:£30.85£37.02

Trend Hinge Jig Two Part c/w C/Chisel & Cutter

Trend Hinge Jig Two Part c/w C/Chisel & Cutter

A two part trade hinge jig to cut hinge recesses in doors & linings Hard wearing template in 12mm phenolic plastic. Two part, splits into two lengths with dovetail joint. One set up for door and frame. No need to adjust for repeated doors. Four adjustable apertures. For a 2 metre door hinges are 6 inch down and 9 inch up and the middle. Fourth hinge for fire doors (355mm /14 inches down from top of top hinge). For doors 16mm to 51mm thick with separate (plant on) stops, or stops thinner than 11mm. Swivel end plate for 3mm gap to head of door. Use with a light duty plunge router with 1/4 inch collet. Includes three edge guides, three bradawls and 16 mm guide bush. Unibase may be needed. Patent No. GB2285410.

Price:£145.95£175.14

Trend Hinge Recessing Jig

Trend Hinge Recessing Jig

The Hinge Jig is a portable template set designed for recessing hinges in wooden doors & frames. It is easy to use with minimal setting-up time, completing the job both accurately & quickly. Used on-site & in joinery shops to increase productivity with excellent results. Four apertures for fire door requirements. No need for marking out in the conventional way. Quick & simple to set-up as the hinge is used as the pattern. Clean & accurate recesses are achieved every time. Suitable for timber based doors & square butt hinges. Use with a light duty router with 1/4 inch collet. Long reach router cutter required, 12mm diameter with 70mm overall length. Angled position slots to prevent creep. Unibase may be needed. Patent No. GB2285410. T4EK router requires a ref. UNIBASE or special guide bush ref. GB/T4/160.

Price:£224.00£268.80

Trend Hinge Sinking 35mm Diameter

Trend Hinge Sinking 35mm Diameter

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This economy range is supplied without scribers and are used for recessing holes in melamine covered chipboard.

Price:£8.50£10.20

Trend Intumescent Cutter Set

Trend Intumescent Cutter Set

For either frame or door applications, with standard Intumescent Strip. Neatly cuts grooves on doors or frames to accept Intumescent Strip which enables the formation of effective barriers to both fire and smoke. By using alternative ball bearings diameters other seal thicknesses can be introduced. Alternative bearings can be purchased to suit other thicknesses. For 4.0mm thick and 15.0mm width intumescent strip.

Price:£30.85£37.02

Trend Intumescent Cutter Set 10mm X 40mm

Trend Intumescent Cutter Set 10mm X 40mm

For either frame or door applications, with standard Intumescent Strip. Neatly cuts grooves on doors or frames to accept Intumescent Strip which enables the formation of effective barriers to both fire and smoke. By using alternative ball bearings diameters other seal thicknesses can be introduced. Alternative bearings can be purchased to suit other thicknesses.

Price:£30.35£36.42

Trend Kitchen Fitters Pack One

Trend Kitchen Fitters Pack One

4 Piece Set. ½" shank cutters. Can be used in natural timbers, particle board and fibreboard. Packs of cutters aimed at kitchen fitters. Microgranular Carbide Tips PTFE-Coated Body Minimises Resin Build-Up

Price:£52.28£62.74

Trend Kitchen Fitters Pack Two

Trend Kitchen Fitters Pack Two

4 Piece Set. ½" shank cutters. Can be used in natural timbers, particle board and fibreboard. Packs of cutters aimed at kitchen fitters. Microgranular Carbide Tips PTFE-Coated Body Minimises Resin Build-Up

Price:£60.26£72.31

Trend Kitchen Worktop Jig 900mm

Trend Kitchen Worktop Jig 900mm

Tradesman ALL IN ONE work top jig for up to 900mm worktops. Hard wearing solid laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. Left hand and right hand corners, 400mm radius penisular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps. Fixed lengths for 400mm, 500mm, 550mm, 600mm, 616mm, 650mm, 700mm and 900mm wide worktops. Cuts up to 40mm thick worktops with or without anti-drip postformed edge. Three open-ended bolt recesses (dog bone style) for 150mm bolts. Engraved lines for short 65mm bolts and worktop cross-cut. 10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up. Engraved markings for identification of pin holes.

Price:£138.00£165.60

Trend Kitchen Worktop Jig Offset Scriber

Trend Kitchen Worktop Jig Offset Scriber

Gives offset between worktop jig and guide bush for ease of setting up. Allows true cutter path to be drawn. Scribes directly onto worktop. For 30 mm guide bush and 1/2 inch router cutter.

Price:£16.90£20.28

Trend Lock Jig

Trend Lock Jig

This jig uses a set of interchangeable templates & with a router will cut the mortise & face-plate recess for popular door locks. For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1inch face-plate. Deeper mortises can be achieved with a suitable size of auger bit. Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood. CNC precision manufacturing plates & body. The jig requires a plunge router with a 80mm plunge, fitted with a 30mm guide bush & 12mm diameter long reach cutter. Other sizes of template available to special order, please contact Trend Tecnical Support for more information.

Price:£85.00£102.00

Trend Locking Key M6 Female

Trend Locking Key M6 Female

Ideal for locking sliding plates and bars. Reinforced plastic. Has brass insert.

Price:£6.90£8.28

Trend Long Reach Cutter

Trend Long Reach Cutter

Trend Long Reach Cutter 12mm Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.

Price:£17.42£20.90

Trend Lubricant Wax Stick 342g

Trend Lubricant Wax Stick 342g

Extends sawblade life by keeping blade cool at cutting points. For use when sawing aluminium. Use at regular intervals. Apply directly onto the teeth of a stationary blade.

Price:£7.40£8.88

Trend Mortise and Tenon Jig

Trend Mortise and Tenon Jig

Enables mortise & tenons and dowel joints to be cut with a router. Ideal for cabinet, chair and table. CNC precision manufactured plates and body. One set-up for both mortise and tenon giving perfectly fitting joints. Fully adjustable for compound angle joints up to 45 degree. Reversible templates to produce round and square end tenons. Templates can be used for accurate dowelling applications. Cuts mortise & tenon sizes of 1/4 inch (6.35mm) to 5/8 inch (15.9mm). Guide bushes are included but cutters are required. A Unibase may be required for certain makes & models of router. All tenons are cut with a 5/8 inch diameter straight cutter (Ref. C026). The width of the tenon is adjusted by using different guide bush diameters. International PCT Appl No. PCT/GB02/00253.

Price:£179.50£215.40

Trend Multiscribe Pro

Trend Multiscribe Pro

The Multiscribe is a profile matching tool used to transfer contours from one shape to another and mark on to various materials. For use by all trades, carpenters, joiners and builders, the Multiscribe may be used as a compass, plumb bob, vertical or horizontal level. Steel blade is graduated with 1/4" and 5mm for profiling and features a built-in spirit level and pencil sharpener.

Price:£33.10£39.72

Trend Ovolo 3.2mm Radius x 9.5mm Diameter

Trend Ovolo 3.2mm Radius x 9.5mm Diameter

Trend Ovolo 3.2mm Radius x 9.5mm Diameter A small beading cutter for fine decorative panelling, veining or rounding over.

Price:£13.00£15.60

Trend Ovolo Rounding Over Cutter

Trend Ovolo Rounding Over Cutter

Ovolo rounding over cutter 8mm radius Without Bearings Some Ovolo cutters can be used with radius cutters, to make rule joints. Some Ovolo cutters can be used with radius cutters, to make rule joints.

Price:£38.42£46.10

Trend Pocket Cutter 15.9mm

Trend Pocket Cutter 15.9mm

Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual, and only cut up to half the diameter of the cutter in one pass.

Price:£31.35£37.62

Trend Pocket Hole Jig

Trend Pocket Hole Jig

For fast and accurate joining of timber and plywood giving strong instant joints. Solid hardened bushes with variable pitch of 29mm to 63mm. Use on timber, MDF, plywood and blockboard. Allows a variety of joints to be created individually. Uses square drive self tapping screws. Workpiece can be handled immediately after gluing & screwing creating time saving benefits. No clamps required.

Price:£60.50£72.60

Trend Profile Cutter

Trend Profile Cutter

Trend Profile Cutter Profiler with shank mounted bearing guides.

Price:£42.84£51.41

Trend Radius 11.1mm Radius x 22.2mm Diameter

Trend Radius 11.1mm Radius x 22.2mm Diameter

Trend Radius 11.1mm Radius x 22.2mm Diameter These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Ref. C056A is used with the Trend Draining Groove Jig.

Price:£19.21£23.05

Trend Radius 4.8mm Radius x 9.5mm Diameter

Trend Radius 4.8mm Radius x 9.5mm Diameter

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Ref. C056A is used with the Trend Draining Groove Jig. Trend General Title Cove Style Radius Cutters

Price:£12.50£15.00

Trend Radius 6.3mm Radius x 12.7mm Diameter

Trend Radius 6.3mm Radius x 12.7mm Diameter

Trend Radius 6.3mm Radius x 12.7mm Diameter These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Ref. C056A is used with the Trend Draining Groove Jig.

Price:£13.43£16.12

Trend Radius 7.9mm Radius x 15.9mm Diameter

Trend Radius 7.9mm Radius x 15.9mm Diameter

Trend Radius 7.9mm Radius x 15.9mm Diameter These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Ref. C056A is used with the Trend Draining Groove Jig.

Price:£17.00£20.40

Trend Radius 9.5mm Radius x 19.1mm Diameter

Trend Radius 9.5mm Radius x 19.1mm Diameter

Trend Radius 9.5mm Radius x 19.1mm Diameter These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Ref. C056A is used with the Trend Draining Groove Jig.

Price:£18.36£22.03

Trend Radius Cutter 1/4in

Trend Radius Cutter 1/4in

Trend Radius Cutter 1/4in For coves and part of a rule joint.

Price:£21.93£26.32

Trend Radius Cutter 5mm Radius

Trend Radius Cutter 5mm Radius

Trend Radius Cutter 5mm Radius For coves and part of a rule joint. D=10 mm|C=18 mm|R=5 mm|Shank Diameter=3/8 inch|

Price:£24.14£28.97

Trend Roman Ogee 4mm Radius x 15.9mm Cut

Trend Roman Ogee 4mm Radius x 15.9mm Cut

Trend Roman Ogee 4mm Radius x 15.9mm Cut By raising the cutter, the top quirk is removed. C 5/8 inch C 15.9 mm B 9.5 mm R 4 mm Shank Diameter 1/4 inch

Price:£26.35£31.62

Trend Rosette Drilling Tool Set

Trend Rosette Drilling Tool Set

Trend Rosette Drilling Tool Set The body of the Trend Rosette drilling tool is made from tool steel which accurately supports a pair of removeable Tungsten Carbide knives. The shank is 1/2 inch in diameter with three flats for non-slip.

Price:£100.50£120.60

Trend Rota-Tip Blade

Trend Rota-Tip Blade

Trend Rota-Tip Blade Replacement Solid Carbide blade

Price:£5.80£6.96

Trend Rota-Tip Blade (10)

Trend Rota-Tip Blade (10)

Trend Rota-Tip Blade (10) Replacement Solid Carbide blade

Price:£51.00£61.20

Trend Rota-Tip Cutter 12.7mm Diameter

Trend Rota-Tip Cutter 12.7mm Diameter

Tool body remains in place when changing blades, thus reducing down-time. Straight cutters have blades with two or four cutting edges, allowing them to be rotated and locked in identical positions. 1/2 inch shank tools are ideal for use in production applications. Clear economical advantage over conventional brazed tip tooling. The single blade can be rotated 180 degrees to give double the life of a conventional tool. Ideally suited for use with Trend Combi worktop jigs. Suitable for plunge cutting. Use on chipboard only.

Price:£59.42£71.30

Trend Rota-Tip Stair Cutter 22mm Diameter

Trend Rota-Tip Stair Cutter 22mm Diameter

Tool body remains in place when changing blades, thus reducing down-time. 1/2 inch shank tools are ideal for use in production applications. Clear economical advantage over conventional brazed tip tooling. Designed for stair housing machine and jigs. Use a reduced feed speed to prolong tool life

Price:£90.52£108.62

Trend Rota-Tip Straight 12.7mm Diameter

Trend Rota-Tip Straight 12.7mm Diameter

Tool body remains in place when changing blades, thus reducing down-time. Straight cutters have blades with two or four cutting edges, allowing them to be rotated and locked in identical positions. 1/2 inch shank tools are ideal for use in production applications. Clear economical advantage over conventional brazed tip tooling. The single blade can be rotated 180 degrees to give double the life of a conventional tool. Refs. RT/11(M) & RT/13 are ideally suited for use with Trend Combi worktop jigs. Refs. RT/11M & RT/12M have a shorter shank, designed for use with Makita 3600B & 3612BR, Ryobi and Hitachi routers. Refs. RT/15, 16 & 17 are suitable for fixed head machines only. Suitable for plunge cutting.

Price:£52.28£62.74

Trend Rounding Over Cutter

Trend Rounding Over Cutter

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece.

Price:£21.93£26.32

Trend Routabout Cutter 22mm Floor 1/2" Shank

Trend Routabout Cutter 22mm Floor 1/2" Shank

Trend Routabout Cutter 22mm Floor 1/2" Shank Replacement cutter for use on 22mm floor thickness.

Price:£37.30£44.76

Trend Routabout Jig 22mm x 1/2" Shank

Trend Routabout Jig 22mm x 1/2" Shank

Access to pipes & cables beneath chipboard floors in seconds. For builders, plumbers & electricians. A 250mm diameter opening can be cut and made good in seconds. Designed for use in new or existing 22mm chipboard or similar floors. Cuts only the thickness of the board. No waste, the piece cut out is used to make good the floor. All you need is a plunge router (750 watts or above). A Unibase may be required for certain makes and models of router. Patent No. GB2238751.

Price:£49.00£58.80

Trend Routabout Ring Set 22mm (10)

Trend Routabout Ring Set 22mm (10)

Trend Routabout Ring Set 22mm (10) Replacement 22mm thick floor rings.

Price:£41.00£49.20

Trend Router 12.7mm Diameter

Trend Router 12.7mm Diameter

Trend Router 12.7mm Diameter Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.

Price:£10.71£12.85

Trend Router 15.9mm Diameter

Trend Router 15.9mm Diameter

Trend Router 15.9mm Diameter Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.

Price:£11.64£13.97

Trend Router Biscuit Jointer Set

Trend Router Biscuit Jointer Set

This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing. The set is supplied with three ball bearing guides to suit the three sizes of biscuits available. A slightly longer cut than the length of the biscuit is required for ease of alignment during assembly.

Price:£26.78£32.14

Trend Router Cutter 1/2in

Trend Router Cutter 1/2in

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

Price:£8.50£10.20

Trend Router Cutter 12.7mm Diameter 1/2in

Trend Router Cutter 12.7mm Diameter 1/2in

Trend Router Cutter 12.7mm Diameter 1/2in Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.

Price:£11.64£13.97

Trend Router T Square 1000mm

Trend Router T Square 1000mm

A large 1 metre long bladed T-square for use with a router. Blade has two parallel edges to allow a router to run on both edges. Allows a router to rout an edge square. The butt has two M5 tapped holes for fitting of a false fence. Ideal for grooving, trenching and squaring of material. Made from solid phenolic laminate. Router not included.

Price:£49.90£59.88

Trend Self Guided Bevel Trim Angle 65 Degrees

Trend Self Guided Bevel Trim Angle 65 Degrees

This is bearing guided and gives a smooth bevel finish for laminates and other materials. Bearing follows the board beneath. Cut length=1/4 inch Cut length=6.3 mm B=12.7 mm A=65 degrees Shank Diameter=1/4 inch

Price:£10.71£12.85

Trend Self Guided Chamfer Angle 45 Degrees x 12.7mm Cut

Trend Self Guided Chamfer Angle 45 Degrees x 12.7mm Cut

Self-guiding chamfer/bevel cutter. Bearing follows the board beneath. D=32 mm C=1/2 inch C=12.7 mm B=9.5 mm A=45 degrees Shank Diameter=8mm

Price:£18.36£22.03

Trend Self Guided Rebater 35mm Diameter x 12.7mm Cut

Trend Self Guided Rebater 35mm Diameter x 12.7mm Cut

Trend Self Guided Rebater 35mm Diameter x 12.7mm Cut These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners.

Price:£19.97£23.96

Trend Single Flute Cutter

Trend Single Flute Cutter

Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks.

Price:£17.85£21.42

Trend Slotting 3.2mm Cutter

Trend Slotting 3.2mm Cutter

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with every cutter giving a 9.5mm groove depth. Depth of cut can be changed by purchasing alternative bearing sizes. Easy to set-up and use.

Price:£15.64£18.77

Trend Smokeseal Recesser

Trend Smokeseal Recesser

Trend Smokeseal Recesser Refs. 332 and 332 are designed to accomodate Schlegel Smokeseal and Quick Fit brush strips. The groove is cut in the door edge rather than the frame. Ref. 332 has no bearing guide. Ref. 333 comes complete with a guide bearing to reduce setting-up time. MEC mechanical feed only. D=45 mm D2=34 mm C=2.75 mm C2=2.5 mm Overall length=58 mm Shank Diameter=1/2 inch

Price:£74.54£89.45

Trend Snappy 25mm Bit Holder

Trend Snappy 25mm Bit Holder

Trend Snappy 25mm Bit Holder Extra long magnetic holder for 25mm insert bits.

Price:£12.10£14.52

Trend Snappy 25mm Bit Holder

Trend Snappy 25mm Bit Holder

Trend Snappy 25mm Bit Holder Extra long magnetic holder for 25mm insert bits.

Price:£9.90£11.88

Trend Snappy 25mm Bit Pozi No2 Tin Coated (10)

Trend Snappy 25mm Bit Pozi No2 Tin Coated (10)

Trend Snappy 25mm Bit Pozi No2 Tin Coated A pack of ten 25mm No. 2 Pozi 25mm insert bits Titanium nitride coating (TiN) coated. They have a round shaft to reduce breakage giving excellent torque transmission, high resistance to Cam-Out (coming out of screw head)and extended life time.

Price:£6.00£7.20

Trend Snappy 5 Piece Countersink Set

Trend Snappy 5 Piece Countersink Set

Heat treated tool steel countersinks with a HSS drill. Adjustable for different length screws and can produce a 9.5mm (3/8 inch) diameter or 12.7 mm (1/2 inch diameter counterbored hole for woodplugs. The drill produce pilot holes only.

Price:£19.50£23.40

Trend Snappy 7 Piece Imperial Drill Set

Trend Snappy 7 Piece Imperial Drill Set

The HSS drill bits are gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. The hex collar, is supplied in the sets to enable drills to be removed with two spanners.

Price:£19.50£23.40

Trend Snappy 82 Degree Countersink Tool Steel

Trend Snappy 82 Degree Countersink Tool Steel

A single flute coutersink for countersinking holes in wood and man-made boards. Dimensions: A=82 degrees Shank Diameter=1/4 inch hex

Price:£9.50£11.40

Trend Snappy Centring Guide Drill

Trend Snappy Centring Guide Drill

Self-centring drill for the accurate drilling of pilot holes for fittings such as hinges to ensure exact alignment . This sprung-loaded drill bit guide is self-centering. Used for accurate drilling of holes in hinges and other ironmongery to ensure exact alignment. They can be easily dismantled for cleaning and are supplied with a hss drill bit.

Price:£7.90£9.48

Trend Snappy Countersink and Drill

Trend Snappy Countersink and Drill

Made of heat treated tool steel with hex shafts. Fitted with High Speed Steel drill bit and is self clearing. Adjustable for different screw lengths.

Price:£4.80£5.76

Trend Snappy Drill And Adapter

Trend Snappy Drill And Adapter

The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck.

Price:£3.30£3.96

Trend Snappy Drill Bit 9/64in

Trend Snappy Drill Bit 9/64in

Trend Snappy Drill Bit 9/64in Spare HSS drill bit for the SNAP/DBG/9.

Price:£2.40£2.88

Trend Snappy Extra Long Pozi Bit No.2

Trend Snappy Extra Long Pozi Bit No.2

Trend Snappy Extra Long Pozi Bit No.2 High grade tool steel bits, hardened for ultimate wear resistance. Length: 150mm

Price:£5.90£7.08

Trend Snappy Flat Bit Extension 300mm

Trend Snappy Flat Bit Extension 300mm

Trend Snappy Flat Bit Extension 300mm Flat bit extension. Minimum diameter of flat bit that can be used is 16.0mm.

Price:£7.90£9.48

Trend Snappy Flip Driver Set 4 Piece

Trend Snappy Flip Driver Set 4 Piece

A four piece drill countersinking and screwdriving flip over set. Supplied with quick-change shank for fitting into Snappy Quick Chuck. Drill length can be adjusted with 5/64inch A/F hex key and is supplied with No 2 Pozi¨ drive insert bits

Price:£15.50£18.60

Trend Snappy Forstner 10mm

Trend Snappy Forstner 10mm

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Will also drill overlapping holes.

Price:£9.50£11.40

Trend Snappy Glass Drill 6mm

Trend Snappy Glass Drill 6mm

For use on glass, porcelain, tile and mirrors. To be used in drill presses and portable drills The spear point is a fully ground profile tip for clean entry. Drill at slow speed, applying light pressure and use lubricant, make pool with putty for oil or water. Wear glasses and gloves. Cannot be used on toughened glass. Diameter=6mm Shank Diameter: 1 /4 inch Hex

Price:£5.80£6.96

Trend Snappy Glass Drill 8mm

Trend Snappy Glass Drill 8mm

For use on glass, porcelain, tile and mirrors. To be used in drill presses and portable drills. The spear point is a fully ground profile tip for clean entry. Drill at slow speed, applying light pressure and use lubricant, make pool with putty for oil or water. Wear glasses and gloves. Cannot be used on toughened glass. Diameter=8mm Shank Diameter: 1 /4 inch Hex

Price:£6.30£7.56

Trend Snappy Machine Bit

Trend Snappy Machine Bit

For drilling blind holes for circular hinges in kitchen and cabinet doors. The 15mm machine bit is designed to suit cam and dowel fixings. D=15mm OL=60 Shank Diameter=1/4 inch hex

Price:£12.90£15.48

Trend Snappy No 10 Four Piece Set

Trend Snappy No 10 Four Piece Set

This set incorporates one of each of the four main lines and is designed for No.10 screw size. Screw size=No.8 Quick chuck Drill countersink No.2 Pozidrive bit Drill bit guide Shank Diameter: 1 /4 inch Hex

Price:£23.70£28.44

Trend Snappy No 8 Four Piece Set

Trend Snappy No 8 Four Piece Set

This set incorporates one of each of the four main lines and is designed for No.8 screw size. Screw size=No.8 Quick chuck Drill countersink No.2 Pozidrive bit Drill bit guide Shank Diameter: 1 /4 inch Hex

Price:£23.70£28.44

Trend Snappy Phillips No 2 Bit 150mm

Trend Snappy Phillips No 2 Bit 150mm

Extra long Phillips screwdriver bits For use with Snappy Quick Chuck. Overall Length: 150mm

Price:£5.90£7.08

Trend Snappy Phillips No 2 Bit Pack of 3

Trend Snappy Phillips No 2 Bit Pack of 3

High grade tool steel bits, hardened for ultimate wear resistance. The bits have 1/4 inch hex shanks to fit the Quick Chuck. OL 50 mm Size Phillips No.2 Shank Diameter 1/4 inch hex

Price:£6.90£8.28

Trend Snappy Plug Cutter 1/2in

Trend Snappy Plug Cutter 1/2in

Made from Tool Steel they allow for longer plugs to be drilled. Plug cutter for cutting plugs in Wood. Made from Tool Steel, can be used in Snappy Quick chucks or directly in a standard chuck. For cutting 1/2 inch (12.7mm) Plugs

Price:£12.10£14.52

Trend Snappy Plug Cutter 3/8in

Trend Snappy Plug Cutter 3/8in

Made from Tool Steel they allow for longer plugs to be drilled. Plug cutter for cutting plugs in Wood. Made from Tool Steel, can be used in Snappy Quick chucks or directly in a standard chuck. For cutting 3/8 inch (9.5mm) Plugs.

Price:£9.50£11.40

Trend Snappy Plug Cutter Screw Set

Trend Snappy Plug Cutter Screw Set

The set comprises Quick Chuck, Drill/Countersink, Pozi Screwdriver bit and standard Plug cutter Plug cutter set for No.10 screw size. The set comprises Quick Chuck, Drill/Countersink,Pozi Screwdriver bit and standard Plug cutter Screw size=No.12 Quick chuck Drill countersink Pozi bit Plug cutter=1 /2 inch (12.7mm) Shank Diameter: 1 /4 inch Hex

Price:£24.70£29.64

Trend Snappy Pozi Bit Pack (3)

Trend Snappy Pozi Bit Pack (3)

High grade tool steel bits, hardened for ultimate wear resistance. The bits have 1/4 inch hex shanks to fit the Quick Chuck. Overall length 50 mm Size Pozi No.3 Shank Diameter 1/4 inch hex

Price:£5.30£6.36

Trend Snappy Quick Chuck

Trend Snappy Quick Chuck

This is fitted into a standard 3/8 inch key or keyless chuck. The Quick Chuck will fit any power drill that uses a standard 9.5mm (3/8in) key or keyless chuck. Attachments such as the snappy range or direct drive 1/4in screwdriver bits will then snap in and out without a chuck key. The quick chuck has three flats on the shank to ensure non-slippage in the chuck.

Price:£9.50£11.40

Trend Snappy Quick Chuck Magnetic 2in

Trend Snappy Quick Chuck Magnetic 2in

Trend Snappy Quick Chuck Magnetic 2in Magnetic chuck accepts Snappy shank fittings and Insert screwdriver bits (Magnet will hold wood screws when used with Insert bits).

Price:£9.50£11.40

Trend Snappy Quick Chuck Yankee Shank Large

Trend Snappy Quick Chuck Yankee Shank Large

Trend Snappy Quick Chuck Yankee Shank Large. For 5/16 inch No. 131A Yankee Spiral ratchet screwdrivers (Large).

Price:£13.20£15.84

Trend Snappy Square Bit Pack of 3

Trend Snappy Square Bit Pack of 3

Trend Snappy Square Bit Pack of 3 Square Robertson screwdriver bits.

Price:£3.50£4.20

Trend Snappy Square Drive

Trend Snappy Square Drive

Trend Snappy Square Drive Square drive with ball locator.

Price:£5.30£6.36

Trend Snappy Stub Auger Set 8 Piece

Trend Snappy Stub Auger Set 8 Piece

Ideal for drilling between joists. Made from high quality carbon steel with screw thread and single spur. They must only be used with torque control drills.

Price:£31.50£37.80

Trend Snappy Tool Holder Bit Set

Trend Snappy Tool Holder Bit Set

Heavy duty fabric tool holder with a selection of assorted Trend Snappy tools. With elastic pockets to hold Trend Snappy shanks. Supplied with a snappy pencil. Tool holders have a belt strap and are Velcro fastening.

Price:£39.00£46.80

Trend Snappy Tube Plug Cutter 12.7mm

Trend Snappy Tube Plug Cutter 12.7mm

Made from Tool Steel they allow for longer plugs to be drilled. Diameter=12.7mm (1/2 inch) Shank diameter=1/4 inch Hex A direct drive shank tube type plug cutter with use with the Snappy Quick Chuck. The plug cutter creates a wooden plug or pellet to disguise screw heads.

Price:£14.50£17.40

Trend Snappy Tube Plug Cutter 16mm

Trend Snappy Tube Plug Cutter 16mm

Made from Tool Steel they allow for longer plugs to be drilled. Plugs are parallel sided. Recommended for use with a pillar drill. Shank Diameter=1/4 inch hex Plug size=16 mm

Price:£20.50£24.60

Trend Staff Bead Nosing

Trend Staff Bead Nosing

Trend Staff Bead Nosing for jointing & hinging. D 19 mm C 6 mm C2 22 mm R 3 mm Shank Diameter 1/4 inch

Price:£42.84£51.41

Trend Stair Trenching Cutter

Trend Stair Trenching Cutter

For use with commercial dovetailing and stair-housing jigs. Purpose made for stair housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails.

Price:£38.42£46.10

Trend Straight Cutter 1/4in

Trend Straight Cutter 1/4in

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

Price:£7.65£9.18

Trend Tee Nut

Trend Tee Nut

Trend Tee Nut A strong, reliable and easy to fix low cost anchor for wood and fibre board. Simply insert into a pre-drilled hole and hammer gently into place. They are pronged and self-locking to prevent rotation during use.

Price:£4.80£5.76

Trend Template Profile Cutter

Trend Template Profile Cutter

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before trimming. Refs. 46/910 and 46/91 have a shorter cutter length for use on thin boards. They are ideal for template making.

Price:£22.01£26.41

Trend Tongue And Groove Set

Trend Tongue And Groove Set

Trend Tongue And Groove Set A one piece bearing guided set. Parts are inter-changed on the arbor to alter the set-up.

Price:£63.41£76.09

Trend Torx Screw M3.5 x 3.5mm

Trend Torx Screw M3.5 x 3.5mm

Trend Torx Screw M3.5 x 3.5mm Replacement screw for the rota-tip cutters. Head type dome x 6mm diameter Thread M3.5 Thread length 3.5mm Driver type torx

Price:£2.40£2.88

Trend Trimming Cutter

Trend Trimming Cutter

For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. A 3mm approximate overlap should be left before copy profiling. When using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.

Price:£17.42£20.90

Trend Two Flute Cutter 1/2in

Trend Two Flute Cutter 1/2in

Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling 1/2in Shank. C = 19 mm D = 10 mm 25/64 in

Price:£19.64£23.57

Trend Two Flute Cutter 1/2in 50mm Shank

Trend Two Flute Cutter 1/2in 50mm Shank

Trend Two Flute Cutter 1/2in 50mm Shank TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip

Price:£25.50£30.60

Trend Two Flute Cutter 1/4in

Trend Two Flute Cutter 1/4in

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip.

Price:£13.43£16.12

Trend Two Flute Cutter 10mm Diameter

Trend Two Flute Cutter 10mm Diameter

TCT Two Flute Cutter Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Tooling 1/2in Shank. C = 19 mm D = 10 mm 25/64 in

Price:£26.78£32.14

Trend Two Flute Cutter 12.7 Mm Diameter TCT

Trend Two Flute Cutter 12.7 Mm Diameter TCT

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Dnamic Carbide - A new generation of extended life straight router cutters TCT plunge centre tip Two flutes give a clean finish to cut edges Suitable for plunge routers

Price:£17.85£21.42

Trend Two Flute Cutter 12.7mm Diameter

Trend Two Flute Cutter 12.7mm Diameter

Use on softwoods, hardwoods, MDF, plywood and chipboard. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. All cutters have a bottom cut feature.

Price:£10.71£12.85

Trend Two Flute Cutter 12.7mm Diameter

Trend Two Flute Cutter 12.7mm Diameter

TCT Two Flute Cutter Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Tooling 1/2in Shank. Ideal for cutting kitchen worktops C = 50 mm D = 12.7 mm 1/2 in

Price:£24.56£29.47

Trend Two Flute Cutter 12.7mm Diameter

Trend Two Flute Cutter 12.7mm Diameter

Trend Two Flute Cutter 12.7mm Diameter Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.

Price:£30.35£36.42

Trend Two Flute Cutter 12.7mm Diameter

Trend Two Flute Cutter 12.7mm Diameter

Trend Two Flute Cutter 12.7mm Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.

Price:£13.00£15.60

Trend Two Flute Cutter 12.7mm Diameter TCT 1/2in

Trend Two Flute Cutter 12.7mm Diameter TCT 1/2in

Dnamic Carbide - A new generation of extended life straight router cutters TCT extra long cutter. Designed for hollow honeycomb board worktops TCT plunge centre tip Two flutes give a clean finish to cut edges Use only on professional routers with 80mm deep plunge and suitable one piece multi-slit collet to ensure safe cutter retraction into base

Price:£33.49£40.19

Trend Two Flute Cutter 12mm

Trend Two Flute Cutter 12mm

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks.

Price:£23.72£28.46

Trend Two Flute Cutter 12mm Diameter

Trend Two Flute Cutter 12mm Diameter

Dnamic Carbide - A new generation of extended life straight router cutters. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. Suitable for Trend Hinge & Lock Jigs. TCT plunge centre tip Two flutes give a clean finish to cut edges Suitable for plunge routers

Price:£19.46£23.35

Trend Two Flute Cutter 12mm Diameter

Trend Two Flute Cutter 12mm Diameter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. TCT Two Flute Cutter Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, mortising and drilling. Two flutes give a clean finish to cut edges. 1/4in Shank. Two flute cutters with extra long shanks for deep grooving, rebating and morticing. Useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage, take more passes than usual and only cut up to half the diameter of the cutter in one pass.

Price:£19.46£23.35

Trend Two Flute Cutter 19.1mm Diameter

Trend Two Flute Cutter 19.1mm Diameter

Trend Two Flute Cutter 19.1mm Diameter TCT Two Flute Cutter Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods.

Price:£34.42£41.30

Trend Two Flute Cutter 6.3mm Diameter

Trend Two Flute Cutter 6.3mm Diameter

Trend Two Flute Cutter 6.3mm Diameter Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.

Price:£8.50£10.20

Trend Two Flute Cutter 6mm Diameter

Trend Two Flute Cutter 6mm Diameter

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

Price:£17.76£21.31

Trend Two Flute Cutter 9.5 Mm Diameter 1/2in

Trend Two Flute Cutter 9.5 Mm Diameter 1/2in

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. D 9.5 mm C 25 mm OL 71 mm Shank Diameter 1/2 inch

Price:£21.42£25.70

Trend Two Flute Cutter 9.5 Mm Diameter 1/4in

Trend Two Flute Cutter 9.5 Mm Diameter 1/4in

Trend Two Flute Cutter 9.5 Mm Diameter 1/4in Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature. D=3/8 inch D=9.5 mm C=3/4 inch C=19.1 mm Shank Diameter=1/4 inch

Price:£18.78£22.54

Trend Two Flute Cutter 9.5mm Diameter

Trend Two Flute Cutter 9.5mm Diameter

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow mortising. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank. 1/4in D - Diameter - 3/8 in 9.5mm C - Cutting Length - 1 1/4in 31.8mm T.C.T. 2 Flutes.

Price:£8.50£10.20

Trend Universal Countersink

Trend Universal Countersink

Trend Universal Countersink This TCT countersink clamps onto any drill between 3.0mm and 7.2mm in diameter. Recommended for wood and man-made boards. By reversing the countersink on the drill, it can be used as a non-cutting depth stop. Ensures flutes of drill are aligned with flutes of countersink. Do not overtighten screw. Not suitable for production applications and not suitable for ferrous and non-ferrous metals.

Price:£17.90£21.48

Trend Universal Sub-Base With Pins And Bush

Trend Universal Sub-Base With Pins And Bush

The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. It will fit directly to most routers. Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base. Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch. Instructions for fitting The line-up pin fit into the collet and is plunged through the router base. The line-up bush is fitted into the Unibase and secured. This is then placed over the line-up pin and rotated in order to line up the fixing holes. The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes. These range from 10mm up to 30mm (GB10 - GB32). For larger diameter cutters a 40mm guide bush (GB40) is available.

Price:£15.50£18.60