Thyssen Products

Below are our Thyssen products. You can click on each product to view a full description and specification.

Sorting products...Sorting products...

Bohler Thyssen 308L Stainless Steel

Bohler Thyssen 308L Stainless Steel

A triple desoxidized copper-coated rod designed for GTAW of mild and fine grained structural and pressure vessel steels as well as shipbuilding steels. The rod is capable of producing high quality welds in semi-killed and rimmed steel as well as steel of various carbon levels. Because of added desoxidants, Al-Ti-Zr, the rod can also be used for welding steels with a rusty or dirty surface without any sacrifice of weld quality. OK Tigrod 308L Available in 1.6 mm x 5kg 2.4 mm x 5kg

Price:£41.95£50.34

Thermanit X 307 Grade 1.2mm x 15kg

Thermanit X 307 Grade 1.2mm x 15kg

For joining and surfacing applications with heat resistant Cr steels/cast steel grades and heat resistant austenitic steels/cast steel grades. Well suited for fabricating austenitic-ferritic joints – max. application temperature 300 °C (572 °F). For joining unalloyed/low-alloy or Cr steels/cast steel grades to austenitic steels. Low heat input required in order to avoid brittle martensitic transition zones

Price:£69.95£83.94

Thyssen RV NI Flux Cored E812-T1-NI1 Mig Wire 1.2mm x 16kg

Thyssen RV NI Flux Cored E812-T1-NI1 Mig Wire 1.2mm x 16kg

Union RV NI is a rutile flux cored wire 1.2mm x 16kg

Price:£77.95£93.54

Thyssen RV71 Flux Cored E71-T1Mig Wire 1.2mm x 16kg

Thyssen RV71 Flux Cored E71-T1Mig Wire 1.2mm x 16kg

Union RV 71 is a rutile flux cored wire with fast freezing slag for all-position welding, according to EN 439, when using mixed gas M21, M33 and C1. It shows good mechanical-technological properties. The outstanding welding properties are the stable arc, the good modelling characteristic, the very low spatter proportion, finely rippled and notch free weld interface, and good slag detachability. Due to the fast freezing slag out-of-position welding with increased current is possible for manual as well as for mechanized welding

Price:£76.95£92.34
Price:£75.95£91.14

Thyssen Thermanit 25/09 Cut Super Duplex Tig Wire 3.2mm x 10kg

Thyssen Thermanit 25/09 Cut Super Duplex Tig Wire 3.2mm x 10kg

Super duplex stainless steel; restistant to intercrystalline corrosion (Service temp: -50 degrees C up to +220 degrees C Very good resistance to pitting corrosion and stress corrosion craking due to the high CrMo(N) content (pitting index >40) Well suited for conditions in off-shore application, particulary for welding of supermartensitic stainless steels (13% Cr0)

Price:£435.00£522.00

Thyssen Thermanit 316 Stainless Grade 316 Tig Wire

Thyssen Thermanit 316 Stainless Grade 316 Tig Wire

Meter length precision drawn and cleaned tig wire. Welding 316 & 316L base materials. Identification stamped

Price:£23.95£28.74

Thyssen Thermanit Csi Stainless Grade 310 Tig Wire 3.2mm x 10kg

Thyssen Thermanit Csi Stainless Grade 310 Tig Wire 3.2mm x 10kg

Precision high Si wire on metal basket spools for mig & meter lengths for tig. Welding 310 & similar base materials. Bright finish gives excellent feeding characteristics.

Price:£74.95£89.94

Thyssen Thermanit Jew 308L17

Thyssen Thermanit Jew 308L17

Stainless; resistant to intercrystalline corrosion and wet corrosion up to 350 °C (662 °F). Corrosion resistant similar to matching low carbon and stabilized austenitic 18/8 CrNi(N) steels/cast steel grades. Good resistance to nitric acid. For joining and surfacing applications with matching and similar – stabilized and non stabilized – CrNi(N) steels/cast steel grades. Cold toughness at subzero temperatures as low as –105 °C (–157 °F)

Price:£48.95£58.74

Thyssen TYA15 Mild Steel Tig Wire

Thyssen TYA15 Mild Steel Tig Wire

A triple desoxidized copper-coated rod designed for GTAW of mild and fine grained structural and pressure vessel steels as well as shipbuilding steels. The rod is capable of producing high quality welds in semi-killed and rimmed steel as well as steel of various carbon levels. Because of added desoxidants, Al-Ti-Zr, the rod can also be used for welding steels with a rusty or dirty surface without any sacrifice of weld quality. GTAW Type Carbon-manganese Welding current - DC(-) Mild Steel Low Alloy Tig Wire Available in 1.6 mm x 5kg 2.4 mm x 5kg

Price:£43.13£51.76

Thyssen Union 6013 5kg Mild Steel Electrodes

Thyssen Union 6013 5kg Mild Steel Electrodes

General purpose, all positional, including vertical down. AC/DC. Economy electrode. Available in 2.5mm x 5kg 3.2mm x 5kg 4.0mm x 5kg 5.0mm x 6.9kg

Price:£12.25£14.70

Thyssen Union 7018 Low Hydrogen Electrodes

Thyssen Union 7018 Low Hydrogen Electrodes

Basic covered electrode 120% recovery Crack free weld metal Ideal for boilermaking, tanks & shipbuilding. Available sizes: 2.5mm x 4.2kg 3.2mm x 5.5kg 4.0mm x 5.8kg

Price:£10.95£13.14