Starrett Products

Below are our Starrett products. You can click on each product to view a full description and specification.

Sorting products...Sorting products...

Starrett 12in Hacksaw Blades

Starrett 12in Hacksaw Blades

A patented solid state diffusion process produces the industry's most advanced bi-metal hacksaw blade: Massive increase in tooth strength and reduction in breakage and fracture when compared against traditional bi-metal blades. Excellent for interrupted cuts in cramped places or where the blade is subject to bending or twisting stresses .

Price:£3.32£3.98

Starrett 12in Prosite Protractor

Starrett 12in Prosite Protractor

The Starrett ProSite® Protractor takes error prone calculations out of the process of mitre cuts. Simply place the tool against the wall or other surface to be measured, read the angle off the tool and set your mitre saw to the same angle. Upside down or backwards the reading is always correct! The Protractor has two scales – the red scale and arrow show the angle for a perfect mitre joint, the black scale and arrow show the angle to fit a single work piece to an angle. The ProSite® Protractor saves time, reduces waste and is ideal for carpenters, plumbers, and all building trades that require the measuring and transferring of angles.

Price:£51.68£62.02

Starrett 30m Chalk Line

Starrett 30m Chalk Line

Reel Fast Chalk Lines rewind 3 1/2 times faster than standard lines. They are available in chrome plated or high visibility yellow and orange cases. Featuring a fast, easy push button line release, a large chalk capacity and an easy pop in line refill. The locking handle also allows the tool to be used as a plumb bob.

Price:£9.94£11.93

Starrett A-1 Hole Saw Arbor

Starrett A-1 Hole Saw Arbor

Starrett A-1 Hole Saw Arbor The Starrett A1 Arbor with 6.35mm (1/4") high speed steel pilot drill and 8.75mm (11/32") hex shank, fits hole saw diameters 14-30mm (9/16" - 1.3/16"). A set screw in the body allows for easy replacement of the pilot drill.

Price:£7.20£8.64

Starrett A-10 Quick Hitch Arbor

Starrett A-10 Quick Hitch Arbor

The Starrett A10 Quick Hitch Arbor with 6.35mm (1/4") high speed steel pilot drill and 8.75mm (11/32") hex shank, fits hole saw diameters 32-152mm (1.1/4" - 6"). A set screw in the body allows for easy replacement of the pilot drill. Quick Hitch arbors permit instant change of hole saws without tools or removing the arbor from the chuck. Fits hole saw diameter 32-152mm / 1.1/4-6"

Price:£12.14£14.57

Starrett A-4 Hole Saw Arbor

Starrett A-4 Hole Saw Arbor

Starrett A-4 Hole Saw Arbor The Starrett A4 Arbor with 6.35mm (1/4") high speed steel pilot drill and 6.5mm (1/4") hex shank, fits hole saw diameters 14-30mm (9/16" - 1.3/16"). A set screw in the body allows for easy replacement of the pilot drill. Fits hole saw diameter 14-30mm / 9/16 - 1.3/16"

Price:£5.72£6.86

Starrett A1-1 SDS Plus Hole Saw Arbor

Starrett A1-1 SDS Plus Hole Saw Arbor

The Starrett SDS Plus Shank allows the arbors to be used in SDS Plus rotary hammer drills with the hammer action facility turned off. Fitted with a 6.35mm (1/4") high speed steel pilot drill. SDS Plus Shank Arbor with high speed steel pilot drill, fits hole saw diameter 14-30mm / 9/16 - 1.3/16"

Price:£11.71£14.05

Starrett A2 Quick Hitch Arbor

Starrett A2 Quick Hitch Arbor

Starrett A2 Quick Hitch Arbor The Starrett A2 Quick Hitch Arbor with 6.35mm (1/4") high speed steel pilot drill and 11mm (7/16") hex shank, fits hole saw diameters 32-210mm (1.1/4" - 8.9/32"). A set screw in the body allows for easy replacement of the pilot drill. Quick Hitch arbors permit instant change of hole saws without tools or removing the arbor from the chuck. Fits hole saw diameter 32-210 mm / 1.1/4 - 8.9/32"

Price:£12.14£14.57

Starrett A2-1 SDS Plus Hole Saw Arbor

Starrett A2-1 SDS Plus Hole Saw Arbor

The Starrett SDS Plus Shank allows the arbors to be used in SDS Plus rotary hammer drills with the hammer action facility turned off. Fitted with a 6.35mm (1/4") high speed steel pilot drill. SDS Plus Shank Arbor with high speed steel pilot drill, fits hole saw diameter 32-152mm / 1.1/4-6"

Price:£22.14£26.57

Starrett A5 Hole Saw Arbor Extension

Starrett A5 Hole Saw Arbor Extension

Starrett A5 Hole Saw Arbor Extension 300mm / 12" extension, 13mm chuck size, suitable for A2, XA2, and A17-12 type arbors

Price:£9.62£11.54

Starrett Combination Hole Saw Kit

Starrett Combination Hole Saw Kit

Designed to reflect specific trade requirements, each kit comprises a selection of bi-metal hole saws and accessories supplied complete in an attractive, sturdy, free carrying case. Constant Pitch Combination Hole Saw Kit - Bi Metal Hole Saws 20,25,32,38,51 & 64mm. TCT Multi Purpose Hole Saws 25 & 51mm. A1E & A10E Arbors. XA014C Carbide Tipped Pilot Drill

Price:£52.50£63.00

Starrett Diamond Ceramic and Abrasive Hole Saw

Starrett Diamond Ceramic and Abrasive Hole Saw

Starrett Diamond Ceramic and Abrasive Material Hole Saws feature a diamond coated cutting edge permanently bonded to a tough steel body, providing the necessary clearance for cutting at high speeds. Able to cut rapidly through glass, ceramics, brick and stone, our diamond hole saws are the ideal solution in the toughest of cutting situations. Ideal for glass, ceramics, brick, stone, and other abrasive materials, the ultimate hole saw for hard-to-cut materials. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. Cutting depth 41mm (1 5/8”).

Price:£15.15£18.18

Starrett Electricians Hole Saw Kit

Starrett Electricians Hole Saw Kit

Designed for the electrician trade with the most commonly used holesaws. Bi metal hole saws and accessories supplied complete in an attractive, sturdy, free carrying case. Starrett Electricians Holesaw Kit Includes: 6 holesaws - 16mm, 20mm, 25mm, 29mm 44mm and 51mm. A1 and A10 arbors. A7 ejector spring. Carry case.

Price:£42.75£51.30

Starrett Electricians Kit

Starrett Electricians Kit

Constant Pitch Electricians Hole Saw Kit 1 - Bi Metal Hole Saws 16,20,25,32,40 & 51mm. A1 & A10 Arbors. A7 Ejector Spring 9 Piece Set. Suitable for use with Starrett arbors. High cutting accuracy and smooth cut, especially on thin gauge materials. Minimal biting or snagging. Packed in a sturdy carry case. Cutting depth 41mm (1 5/8"). 6 x constant pitch bi-metal holesaws (16, 20, 25, 29, 44 and 51mm), 2 x arbors (A1 and A10), 1 x A7 core ejector spring.

Price:£49.88£59.86

Starrett Extra length High Speed Steel Pilot Drill Bit

Starrett Extra length High Speed Steel Pilot Drill Bit

Starrett Extra length High Speed Steel Pilot Drill Bit Extra length High Speed Steel Pilot Drill for Fast Cut Multi Purpose Hole Saws

Price:£2.86£3.43

Starrett Fast Cutting Wood Hole Saw

Starrett Fast Cutting Wood Hole Saw

Starrett Tungsten Carbide Tipped Fast Cut Multi Purpose Hole Saws are the perfect tool for users from construction and installation engineers to the d-i-y enthusiast. Offering very fast cutting times, and outstanding life, our MPH saws will power through wood, MDF, plastics and ceramic wall tiles. Carbide tipped teeth for outstanding cutting performance and product durability. Smooth cut, with minimal heat build up. Cutting depth 54mm (2 1/8”), allowing use for cutting through strapping and joists. Suitable for use in mains and battery powered tools. Multiple uses - cutting wood, mdf, plastics, ceramic wall tiles and building bricks.

Price:£5.61£6.73

Starrett Hole Saw Arbor Extension

Starrett Hole Saw Arbor Extension

Starrett Hole Saw Arbor Extension 300mm / 12" extension, 9.5mm chuck size, suitable for A1, A10, XA1, XA10, A17-38 and XA17-38 type arbors

Price:£17.61£21.13

Starrett HSS Metal Hole Saw

Starrett HSS Metal Hole Saw

Starrett HSS Metal Hole Saw Starrett Bi Metal Constant Pitch Hole Saws have 6 teeth per 25mm/inch and are ideal for thinner gauge materials. Like our Dual Pitch saw, the Constant Pitch provides a smooth cut, with minimal tendency to bite or snag on contact with irregular surfaces. Smooth cut on thinner gauge materials. Minimal tendency to bite or snag on thinner gauge materials. Cutting depth 41mm (1 5/8”). A range of general purpose and specialist kits are available, featuring the most popular sizes of saw

Price:£7.46£8.95

Starrett Plumbers Hole Saw Kit

Starrett Plumbers Hole Saw Kit

Constant Pitch Plumbers Hole Saw Kit - Bi Metal Hole Saws 19,22,29,38,44,51 & 57mm. A1 & A10 Arbors, A7 Ejector Spring This Plumber's hole-saw kit comprises 19, 22, 29, 38, 44, 51, and 57mm HSS bi-metal holesaws, A1 and A10 arbors complete with pilot drills and an A7 ejector spring. All enclosed in a convenient carrying case. Usually despatched within 3 working days.

Price:£52.50£63.00

Starrett XA-1 Arbor With Carbide Tipped Pilot Drill

Starrett XA-1 Arbor With Carbide Tipped Pilot Drill

Starrett XA-1 Arbor With Carbide Tipped Pilot Drill The Starrett XA1 Arbor with 6.35mm (1/4") carbide tipped pilot drill and 8.75mm (11/32") hex shank, fits hole saw diameters 14-30mm (9/16" - 1.3/16"). A set screw in the body allows for easy replacement of the pilot drill.

Price:£17.59£21.11

StarrettXA-17-38 Carbide Tipped Locking Arbor

StarrettXA-17-38 Carbide Tipped Locking Arbor

StarrettXA-17-38 Carbide Tipped Locking Arbor The Starrett XA17-38 locking arbor with carbide tipped pilot drill 6.35mm (1/4") and 8.75mm (11/32") hex shank, fits hole saw diameters 32-210mm (1.1/4"-8.9/32"). The arbor locks tightly on the saw eliminating vibration and is invaluable on exceptionally tough jobs and production runs.

Price:£28.80£34.56