Sealey Products

Below are our Sealey products. You can click on each product to view a full description and specification.

Sorting products...Sorting products...

Arc Welder 140Amp with Accessory Kit

Arc Welder 140Amp with Accessory Kit

Manufactured to exacting standards these models meet all relevant CE requirements. Fitted with forced air cooling system, these welders have increased duty cycle and performance. All models feature a vented, wrap-around shell fitted to a heavy-duty chassis. Screw type, stepless welding control allows fine adjustment of current. Each welder is fitted with carry handle and wheels for added mobility (no wheels on 140XT and 160XT). All models supplied with complete accessory kit including electrode holder, cables, earth clamp, chipping hammer/wire brush and welding mask. Manufactured to exacting standards this model meets all relevant CE requirements. Fitted with forced air cooling system, this welder has increased duty cycle and performance. Features a single, vented, wrap-around shell fitted to a heavy-duty chassis. Screw type, stepless welding control allows fine adjustment of current. Fitted with carry handle. Supplied with complete accessory kit including electrode holder, cables, earth clamp, chipping hammer/wire brush and welding mask. Model No: 140XT Welding Current: 45-140A Electrode Capacity: Ø1.6-3.2mm Cooling: Forced Air Output Cable: 10mm No Load Voltage: 48V Absorbed Power: 3.0kW Power Input: 230V - 1ph Weight: 17kg

Price:£120.00£144.00

Arc Welder 160Amp with Accessory Kit

Arc Welder 160Amp with Accessory Kit

Manufactured to exacting standards these models meet all relevant CE requirements. Fitted with forced air cooling system, these welders have increased duty cycle and performance. All models feature a vented, wrap-around shell fitted to a heavy-duty chassis. Screw type, stepless welding control allows fine adjustment of current. Each welder is fitted with carry handle and wheels for added mobility (no wheels on 140XT and 160XT). All models supplied with complete accessory kit including electrode holder, cables, earth clamp, chipping hammer/wire brush and welding mask. Manufactured to exacting standards this model meets all relevant CE requirements. Fitted with forced air cooling system, this welder has increased duty cycle and performance. Features a single, vented, wrap-around shell fitted to a heavy-duty chassis. Screw type, stepless welding control allows fine adjustment of current. Fitted with carry handle. Supplied with complete accessory kit including electrode holder, cables, earth clamp, chipping hammer/wire brush and welding mask. Model No: 160XT Welding Current: 55-160A Electrode Capacity: Ø2.0-4.0mm Cooling: Forced Air Output Cable: 10mm No Load Voltage: 50V Absorbed Power: 3.0kW Power Input: 230V - 1ph Weight: 18kg

Price:£135.00£162.00

Electromig Electronic Mig Welder 195Amp 230V

Electromig Electronic Mig Welder 195Amp 230V

Microprocessor controlled MIG welder with forced air cooling. Electronic control and smooth power supply make this model especially suitable for welding steel, stainless steel, galvanized steel, high stress steel and aluminium. Also incorporates settings for brazing - ideal for joining/repairing steel body panels. Model features push button selection of operating parameters including material, gas type, wire diameter and programmable function for saving frequently used configurations.Use with optional Spool-on-Gun welding torches (Model No's MIG/SGT15 - 6mtr, MIG/SGT15/12 - 12mtr) for trouble free aluminium welding. Microprocessor controlled MIG welder with forced air cooling. Electronic control and smooth power supply make this model especially suitable for welding steel, stainless steel, galvanized steel, high stress steel and aluminium. Also incorporates settings for brazing - ideal for joining/repairing steel body panels. Model features push button selection of operating parameters including material, gas type, wire diameter and programmable function for saving frequently used configurations. Use with optional Spool-on-Gun welding torches (Model No's MIG/SGT15 - 6mtr) for trouble free aluminium welding Model No: ELECTROMIG195 Welding Current: 30-195A Wire Capacity: 5-15kg Duty Cycle: 100% @ 60A, 60% @ 80A, 20% @ 140A, 15%@180A Cooling System: Forced Air Spot Welding Timer: Yes Gas Type: CO2, Argon, CO2/Argon Mix Torch: Euro Non-Live Power Input: 230V - 1ph Absorbed Power: 5.2kW Case Size: Large Weight: 41kg Optional 6mtr Spool On Gun Torch: MIG/SGT15

Price:£1,310.00£1,572.00

Gas/No-Gas Mig Welder 150Amp 230V

Gas/No-Gas Mig Welder 150Amp 230V

One of our professional MIGHTYMIG range this compact gas/no-gas welder offers excellent performance at an extremely competitive price. This unit is set up ready to go in gasless mode but can also be switched easily to use with gas by a simple change of polarity and purchase of a Gas Conversion Kit - Model No. 120.802032. Supplied with comfort grip non-live torch, 1.8mtr earth cable, 1mtr gas hose, 0.45kg flux cored wire and 0.9mm contact tip. Model No: MIGHTYMIG150 Maximum Current: 150A Wire Capacity: 0.9kg Duty Cycle: 100% @ 30A, 15% @ 105A Cooling System: Forced Air Gas Type: CO2, Argon, CO2/Argon Mix Torch: Non-Live Power Input: 230V - 1ph Absorbed Power: 4.5kW Case Size: Medium Weight: 26kg Gasless Consumables: Flux cored Wire (0.9kg x Ø0.9mm): TG100/1 Replacement Tips 0.9mm (Pack of 5): TG100/2 For use with 0.9kg Gasless and 0.7kg Mild Steel Wire Reels only.

Price:£295.00£354.00

Inverter 125Amp 230V with Accessory Kit & Carry-Case

Inverter 125Amp 230V with Accessory Kit & Carry-Case

Compact lightweight unit suitable for arc welding using scratch-start method. Automatic Arc-Force circuitry makes the unit suitable for arc welding a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø3.2mm. Also includes thermal cut-out and mains voltage LEDs. Compatible for generator use. Fitted with Hot-Start system to counter electrode sticking during scratch starting. Supplied in tough composite carry-case with 10mm² arc welding accessory kit. IP21 rated Model No: MW125 Peak Power: 125A Operating Power Output: 10-130A Duty Cycle: 60% @ 125A Electrode Capacity: Ø1.6-3.2mm Absorbed Power: 3.5kW Mains Voltage: 230V - 1ph Insulation Class: F Protection: IP21 Weight: 5.5kg Accessories Included: Yes

Price:£295.00£354.00

Inverter 130Amp 110V/230V

Inverter 130Amp 110V/230V

Inverter power supply suitable for arc or TIG welding applications using scratch-start method. Features auto power sensor, automatically switching between 110V or 230V power supplies - ideal for site applications. Arc-Force circuitry makes the unit suitable for arc welding a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø3.2mm. Also includes thermal cut-out and mains voltage LEDs. Fitted with Hot-Start system to counter electrode sticking during scratch starting. Supplied without accessories. IP23 rated. Optional Arc Accessory Kit Model No: INV/10 Optional TIG Accessory Kit Model No: INV/TIG Model No: MW145 Peak Power: 145A Power Output: 5-100/130A Duty Cycle: 40/25% @ 100/130A Electrode Capacity: Ø1.6-3.2mm Absorbed Power: 3.4kW Mains Voltage: 110V/230V -1ph Insulation Class: H Protection: IP23 Weight: 5.1kg Accessories: Arc Accessory Kit (Optional): INV/10 TIG Accessory Kit (Optional):: INV/TIG

Price:£640.00£768.00

Inverter 150Amp 230V with Accessory Kit & Carry-Case

Inverter 150Amp 230V with Accessory Kit & Carry-Case

Compact lightweight unit suitable for arc welding using scratch-start method. Automatic Arc-Force circuitry makes the unit suitable for arc welding a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø4.0mm. Also includes thermal cut-out and mains voltage LEDs. Compatible for generator use. Fitted with Hot-Start system to counter electrode sticking during scratch starting. Supplied in tough composite carry-case with 10mm² arc welding accessory kit. IP21 rated. Model No: MW155 Peak Power: 150A Operating Power Output: 10-150A Duty Cycle: 60% @ 150A Electrode Capacity: Ø1.6-4.0mm Absorbed Power: 4.1kW Mains Voltage: 230V - 1ph Insulation Class: F Protection: IP21 Weight: 5.5kg Accessories Included: Yes

Price:£365.00£438.00

Inverter 80Amp 230V with Accessory Kit & Carry-Case

Inverter 80Amp 230V with Accessory Kit & Carry-Case

Compact lightweight unit suitable for arc welding using scratch-start method. Automatic Arc-Force circuitry makes the unit suitable for arc welding a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø2.5mm. Also includes thermal cut-out and mains voltage LEDs. Compatible for generator use. Fitted with Hot-Start system to counter electrode sticking during scratch starting. Supplied in carry-case (cardboard) with 10mm² arc welding accessory kit. IP21 rated. Model No: MW80 Peak Power: 80A Operating Power Output: 10-80A Duty Cycle: 45% @ 80A Electrode Capacity: Ø1.6-2.5mm Absorbed Power: 2.3kW Mains Voltage: 230V - 1ph Insulation Class: F Protection: IP21 Weight: 3.7kg Accessories Included: Yes

Price:£215.00£258.00

Mig Welder 140Amp 230V with Gas

Mig Welder 140Amp 230V with Gas

Suitable for welding with CO2, Argon or CO2/Argon mix. Features a Forced Air Cooling System to slow transformer heating in order to increase duty cycle and a non-live torch to prevent the risk of accidentally striking an arc. Supplied with a regulator suitable for our range of disposable or refillable gas cylinders (gas is not included). Also includes spool of wire, contact tips 0.6 and 0.8mm. Suitable for welding with CO2, Argon or CO2/Argon mix. Features a Forced Air Cooling System to slow transformer heating in order to increase duty cycle and a non-live torch to prevent the risk of accidentally striking an arc. Supplied with a regulator suitable for our range of disposable or refillable gas cylinders (gas is not included). Also includes spool of wire, contact tips 0.6 and 0.8mm. Model No: SUPERMIG140 Welding Current: 30-140A Wire Capacity: 0.7-5.0kg Duty Cycle: 50% @ 55A, 20% @ 80A Cooling System: Forced Air Spot Welding Timer: No Gas Type: CO2, Argon, CO2/Argon Mix Torch: Non-Live Power Input: 230V-1ph Absorbed Power: 2.8kW Case Size: Compact Weight: 22kg

Price:£295.00£354.00

Mig Welding Nozzle Reamer

Mig Welding Nozzle Reamer

Mig Welding Nozzle Reamer Retracting three-legged scraper for cleaning spatter from welding nozzles. Model No. AK107

Price:£8.75£10.50

Mini Mig Adaptor

Mini Mig Adaptor

Mini Mig Adaptor Mini Mig Adaptor

Price:£9.45£11.34

Mini Regulator Hose Adaptor

Mini Regulator Hose Adaptor

Mini Regulator Hose Adaptor Picture only used for represtentation of what the hose adaptor is attached to.

Price:£2.50£3.00

No-Gas Mig Welder 100Amp 230V

No-Gas Mig Welder 100Amp 230V

One of our professional MIGHTYMIG range, this compact no-gas welder offers excellent performance at an extremely competitive price. This unit is set up ready to go. Supplied with comfort grip non-live torch, 1.8mtr earth cable, 0.45kg flux cored wire and 0.9mm contact tip. Model No: MIGHTYMIG100 Maximum Current: 100A Wire Capacity: 0.9kg Duty Cycle: 60% @ 55A, 20% @ 90A Cooling System: Forced Air Torch: Non-Live Power Input: 230V - 1ph Absorbed Power: 3kW Case Size: Small Weight: 14.5kg Gasless Consumables: Flux cored Wire (0.9kg x Ø0.9mm): TG100/1 Replacement Tips 0.9mm (Pack of 5): TG100/2 For use with 0.9kg Gasless Wire Reels only

Price:£190.00£228.00

Power Belt Sander 100 x 1220mm 750W/230V

Power Belt Sander 100 x 1220mm 750W/230V

Heavy cast base with adjustable sanding table. Fitted with magnetic no-volt release switch to prevent accidental starting after belt jam. Quiet and powerful 230V - 750W motor. Suitable for metal and fabrication workshops Heavy cast base with adjustable sanding table. Fitted with magnetic no-volt release switch to prevent accidental starting after belt jam. Quiet and powerful 230V - 750W motor. Suitable for metal and fabrication workshops. Floor stand is an optional extra. (Illustrated with optional floor stand) Model No: SM100 Belt Size: 100 x 1220mm Belt Speed: 19mtr/sec Flat Grinding Surface: 320 x 105mm Motor Power: 750W - 230V Weight: 28kg Optional Floor Stand Model No: SM100/ST Replacement Belts: Model No: Grade: SM100/B080G 80 Grit SM100/B100G 100 Grit

Price:£545.00£654.00

Precision Oiler

Precision Oiler

Precision Oiler Aluminum body with o ring oil seal. Push button control with cover & clip. 5 1/2" long. Allows precise one drop at a time.

Price:£12.98£15.58

Professional Gas/No-Gas Mig Welder 170Amp with Euro Torch

Professional Gas/No-Gas Mig Welder 170Amp with Euro Torch

One of our professional MIGHTYMIG range this large gas/no-gas welder offers excellent performance at an extremely competitive price. This unit is set up ready to go in gas mode but can also be switched easily to use gasless by a simple change of polarity. Supplied with high quality cool running BINZEL® MB14 Euro torch, 1.8mtr earth cable, 1.4mtr gas hose, twin gauged gas regulator, 1kg spool of 0.6mm wire, 0.6 & 0.8mm contact tips. Illustrated with gas bottle to give an indication of size only; gas is not included. A contract for the supply of gas should be arranged with your local gas distributor. Model No: MIGHTYMIG170 Maximum Current: 170A Wire Capacity: 5kg Duty Cycle: 100% @ 55A, 60% @ 70A, 15% @ 140A Cooling System: Forced Air Gas Type: CO2, Argon, CO2/Argon Mix Torch: Euro Non-Live - BINZEL® MB14 Power Input: 230V - 1ph Absorbed Power: 5.4kW Case Size: Large Weight: 41.5kg Gasless Consumables: Flux Cored Wire (4.5kg x Ø0.9mm): TG100/4 Replacement Tips 0.9mm (Pack of 5): TG100/2

Price:£520.00£624.00

Professional Gas/No-Gas Mig Welder 190Amp with Euro Torch

Professional Gas/No-Gas Mig Welder 190Amp with Euro Torch

One of our professional MIGHTYMIG range this large gas/no-gas welder offers excellent performance at an extremely competitive price. This unit is set up ready to go in gas mode but can also be switched easily to use gasless by a simple change of polarity. Supplied with high quality cool running BINZEL® MB15 Euro torch, 1.8mtr earth cable, 1.4mtr gas hose, twin gauged gas regulator, 1kg spool of 0.6mm wire, 0.6 & 0.8mm contact tips. Illustrated with gas bottle to give an indication of size only; gas is not included. A contract for the supply of gas should be arranged with your local gas distributor. Model No: MIGHTYMIG190 Maximum Current: 190A Wire Capacity: 5-15kg Duty Cycle: 100% @ 70A, 60% @ 90A, 15% @ 180A Cooling System: Forced Air Gas Type: CO2, Argon, CO2/Argon Mix Torch: Euro Non-Live - BINZEL® MB15 Power Input: 230V - 1ph Absorbed Power: 7.2kW Case Size: Large Weight: 43.5kg Gasless Consumables: Flux Cored Wire (4.5kg x Ø0.9mm): TG100/4 Replacement Tips 0.9mm (Pack of 5)

Price:£595.00£714.00

Professional Gas/No-Gas Mig Welder 210Amp with Euro Torch

Professional Gas/No-Gas Mig Welder 210Amp with Euro Torch

One of our professional MIGHTYMIG range this large gas/no-gas welder offers excellent performance at an extremely competitive price. This unit is set up ready to go in gas mode but can also be switched easily to use gasless by a simple change of polarity. Supplied with high quality cool running BINZEL® MB15 Euro torch, 1.8mtr earth cable, 1.4mtr gas hose, twin gauged gas regulator, 1kg spool of 0.6mm wire, 0.6 & 0.8mm contact tips. Illustrated with gas bottle to give an indication of size only; gas is not included. A contract for the supply of gas should be arranged with your local gas distributor. Model No: MIGHTYMIG210 Maximum Current: 210A Wire Capacity: 5-15kg Duty Cycle: 100% @ 80A, 60% @ 105A, 15% @ 210A Cooling System: Forced Air Gas Type: CO2, Argon, CO2/Argon Mix Torch: Euro Non-Live - BINZEL® MB15 Power Input: 230V - 1ph Absorbed Power: 9kW Case Size: Large Weight: 45.5kg Gasless Consumables: Flux Cored Wire (4.5kg x Ø0.9mm): TG100/4 Replacement Tips 0.9mm (Pack of 5): TG100/2

Price:£665.00£798.00

Professional Gas/No-Gas Mig Welder 250Amp with Euro Torch

Professional Gas/No-Gas Mig Welder 250Amp with Euro Torch

Heavy-duty high output transformer and forced air cooling to maximize duty cycle performance. 250Amp Maximum current. Supplied with a high quality BINZEL® MB25AK Euro torch, 3mtr earth cable, 1.4mtr of gas hose, twin gauged gas regulator, 1kg spool of 0.8mm wire, 0.8 and 1.0mm tips. Set up in the gas welding mode but can also easily be switched to gasless. Can be used with large, industrial CO2 gas bottles. Illustrated with gas bottle to give an indication of size only; gas is not included. A contract for the supply of gas should be arranged with your local gas distributor Model No: MIGHTYMIG250 Maximum Current: 250A Wire Capacity: 5-15kg Duty Cycle: 100% @ 110A, 60% @ 140A, 15% @ 250A Cooling System: Forced Air Spot Weld Timer: No Gas Type: CO2, Argon, CO2/Argon Mix Torch: Euro Non-Live - BINZEL® MB25AK Power Input: 230V - 3ph Absorbed Power: 11kW Case Size: Extra-Large Weight: 75kg Replacement Tips 0.8mm (Pack of Five): MIG917 Replacement Tips 1.0mm (Pack of Five): TG100/2 Replacement Nozzle (Pack of 2): MIG929

Price:£1,055.00£1,266.00

Professional Mig Welder 150Amp 230V

Professional Mig Welder 150Amp 230V

Suitable for welding with CO2, Argon or CO2/Argon mix. Uses a Forced Air Cooling System to slow transformer heating in order to increase duty cycle and a non-live torch to prevent the risk of accidentally striking an arc. Supplied with an industrial Argon/CO2 regulator. Illustrated with gas bottle to give an indication of size only; gas is not included. A contract for the supply of gas should be arranged with your local gas distributor Model No: SUPERMIG150 Welding Current: 30-150A Wire Capacity: 0.7-5.0kg Duty Cycle: 100% @ 50A, 75% @ 55A, 50% @ 65A, 20% @ 105A Cooling System: Forced Air Spot Welding Timer: No Gas Type: CO2, Argon, CO2/Argon Mix Torch: Non-Live Power Input: 230V - 1ph Absorbed Power: 4.1kW Case Size: Compact Weight: 30kg

Price:£395.00£474.00

Professional Mig Welder 180Amp 230V

Professional Mig Welder 180Amp 230V

All our Supermig® models are suitable for welding with CO2, Argon or Argon/CO2 mix. Each uses a Forced Air Cooling System to slow transformer heating in order to increase duty cycle and a non-live torch to prevent the risk of accidentally striking an arc. All models are supplied with an industrial Argon/CO2 regulator. Illustrated with gas bottle to give an indication of size only; gas is not included. A contract for the supply of gas should be arranged with your local gas distributor. Model No: SUPERMIG180 Welding Current: 30-180A Wire Capacity: 5kg Duty Cycle: 100% @ 60A, 60% @ 80A, 15% @ 140A, 10% @ 155A Cooling System: Forced Air Spot Welding Timer: No Gas Type: CO2, Argon & CO2/Argon Mix Torch: Non-Live Power Input: 230V - 1ph Absorbed Power: 5.2kW Case Size: Large Weight: 37kg

Price:£585.00£702.00

Sealey 18 Volt Cordless car Polisher 230mm diameter

Sealey 18 Volt Cordless car Polisher 230mm diameter

Cordless random orbital polisher with Ø230mm 5-ply foam pad and two polishing bonnets. Smooth operation provides even buffing/polishing with no hot spots. Impact resistant housing with twin grips. Supplied with 18V Ni-Cd battery pack and battery charger.

Price:£62.50£75.00

Sealey 76 Piece Metric Coarse Tap and Die Set

Sealey 76 Piece Metric Coarse Tap and Die Set

High quality steel taps and dies. Split dies with machined lead-ins for ease of use. Die holder features self-centring mechanism for straight and accurate thread cutting. Set includes taper and plug taps. Kit also includes T-handled tap wrench, Metric screw pitch gauge, slotted 5mm screwdriver and a range of HSS drill bits.

Price:£74.95£89.94

Sealey ABS Plastic Welding Rods Pack of 36

Sealey ABS Plastic Welding Rods Pack of 36

Welding Rods Suitable for HS102 and HS102K hot air guns. Pack of 36.

Price:£10.50£12.60

Sealey Air Filter/Regulator with Gauge Heavy-Duty

Sealey Air Filter/Regulator with Gauge Heavy-Duty

Regulator assembly features locking control knob for pre-setting air pressure and large, easy-to-read pressure gauge. Suitable for most workshop air supply set-ups. Die-cast control heads with clear polycarbonate bowls. Filter is fitted with automatic drain tap. Lubricator includes oil/air mix control and sight glass. Filter and Lubricator are fitted with protection bowl cage. Supplied with 1/2" Male-1/4"Female Adaptors and wall bracket.

Price:£23.50£28.20

Sealey Air Recirculating Economy Sand Blasting Kit

Sealey Air Recirculating Economy Sand Blasting Kit

Suitable for use in the bodyshop. The feathering action makes this blaster ideal for treating stone chips. Supplied with a set of four rubber nozzles for sealing the gun head to the panel and a 700g bottle of blasting grit.

Price:£44.95£53.94

Sealey Buffing & Polishing Foam Head Hook & Loop Soft

Sealey Buffing & Polishing Foam Head Hook & Loop Soft

Ideal for work on dark colours. Made in UK for use with Sealey and other popular machines. Pink Foam - Soft polishing foam.

Price:£12.30£14.76
Price:£2.95£3.54

Sealey Conical Gas Nozzles Threaded M5 Pkt of 5 100 amp

Sealey Conical Gas Nozzles Threaded M5 Pkt of 5 100 amp

Conical nozzles suitable for our Mightymig® range of welders. Pack of 5 x 100 amp

Price:£16.25£19.50

Sealey Deflector Nozzle

Sealey Deflector Nozzle

Deflector Nozzle Suitable for HS100CE (not items 5, 6 & 7), HS102 and HS102K hot air guns. Available separately.

Price:£5.59£6.71

Sealey Deluxe Weld Hood Fixed Lens

Sealey Deluxe Weld Hood Fixed Lens

Comfortable and lightweight. BS EN 175, BS EN 169 - Deluxe headshield supplied with a shade 10 lens, safety lens and an anti-spatter lens. Accepts standard 4-1/4" x 3-1/4" lenses

Price:£19.50£23.40

Sealey Electronic Micro Soldering Torch

Sealey Electronic Micro Soldering Torch

Piezoelectric ignition with ceramic burner head for simple operation and long life. 1300°C Burner flame adjustable from 12 to 35mm. Includes bench stand for hands-free operation. Standard fill gives approximately one hour continuous operation. Powered by Butane (lighter fluid).

Price:£25.50£30.60

Sealey Fish Tail Nozzle

Sealey Fish Tail Nozzle

Fish Tail Nozzle Suitable for HS100CE (not items 5, 6 & 7), HS102 and HS102K hot air guns. Available separately.

Price:£5.59£6.71

Sealey Gas Cylinder Refillable Carbon Dioxide 1Kg

Sealey Gas Cylinder Refillable Carbon Dioxide 1Kg

Sealey Gas Cylinder Refillable Carbon Dioxide 1000g Portable sized CO2 refillable gas cylinder for the jobbing welder. Gives value for money repaying investment in just a few fills. Suitable for Siegen Minimig and Sealey Mightymig welders. Will also fit other makes of welder/regulator.

Price:£60.75£72.90

Sealey Gas Refill CO2 1Kg

Sealey Gas Refill CO2 1Kg

Sealey Gas Refill CO2 1Kg 1 Kg CO2 Refill

Price:£9.95£11.94

Sealey Gasless Mig Wire 0.9kg 0.9mm A5.20 Class E71T-GS

Sealey Gasless Mig Wire 0.9kg 0.9mm A5.20 Class E71T-GS

Suitable for use with our MIGHTYMIG100/150 No-Gas and Gas/No-Gas MIG welders. Top quality wound welding wire manufactured to BS EN ISO 14341:2008.

Price:£17.95£21.54

Sealey Hard Wire Style Mig Torch

Sealey Hard Wire Style Mig Torch

Hard Wire Style Mig Torch

Price:£88.95£106.74

Sealey Hot Air Gun 3-Speed Variable Heat

Sealey Hot Air Gun 3-Speed Variable Heat

Suitable for paint stripping, soft soldering, removing sticky labels and defrosting frozen pipes. Equipped with triple-range variable electronic temperature control. Additionally suitable for plastic welding with optional plastic welding nozzles. Nozzles supplied separately. Gun is designed to stand vertically, allowing use as a safe Bunsen burner alternative. Fitted BS approved 3 pin safety plug. 50-600°C

Price:£99.95£119.94

Sealey Hydraulic Press 10tonne Bench Type

Sealey Hydraulic Press 10tonne Bench Type

This bench press is ideal for the majority of small pressing jobs; repairing small motors, armatures, removing and installing gears, bearings, other press-fit parts. Standard Hydraulic Range 10tonne Bench Press Detachable pump and ram allowing hydraulics to be used for other purposes when press is not in use. Supplied with gauge.

Price:£199.99£239.99

Sealey Hydraulic Puller Set 19 Piece

Sealey Hydraulic Puller Set 19 Piece

A versatile pulling set for the professional mechanic and regular home mechanic. Featuring a forged steel yoke and claws with the added convenience of hydraulic power, this set is highly effective for the removal of stubborn hubs, flanges, gears or bearing. Maximum spread 200 mm Maximum reach 160 mm 2 or 3 jaw configurations for pulling Choice of centring of flat adaptors for thrust operation.

Price:£99.00£118.80

Sealey Hydraulic Puller Set 25 Piece

Sealey Hydraulic Puller Set 25 Piece

A versatile pulling set for the professional mechanic and regular home mechanic. Featuring a forged steel yoke and claws with the added convenience of hydraulic power, this set is highly effective for the removal of stubborn hubs, flanges, gears or bearing. Maximum spread 200 mm Maximum reach 160 mm 2 or 3 jaw configurations for pulling Choice of centring of flat adaptors for thrust operation.

Price:£185.00£222.00

Sealey Joggler Pliers/Punch

Sealey Joggler Pliers/Punch

Save valuable time preparing panel edges. All steel construction with spring loaded handles. Turn the head and you have a strong hole punch-6mm holes for spot welding or brazing. Fitted with non-slip PVC grips.

Price:£65.00£78.00

Sealey Joggler Tool

Sealey Joggler Tool

Save valuable time preparing panel edges. All steel construction with spring loaded handles. Precision made jaws make 10mm flange on 18-20 gauge mild steel or aluminium sheet and provide smooth flush joint between panels. Fitted with non-slip PVC grips.

Price:£43.95£52.74

Sealey Metal Cutting Bandsaw 150mm 230V with Mitre & Quick Lock Vice

Sealey Metal Cutting Bandsaw 150mm 230V with Mitre & Quick Lock Vice

Fully guarded blade with magnetic no-load voltage switch to prevent motor re-start in the event of power failure or blade jam. Complies with the requirements of the Machinery Safety Directive 98/37/EEC and full CE approved. Fitted with oil-bath gearbox and life lubricated drive bearings for quiet, smooth operation. Features swivel arm facility to aid angle cutting of long pieces of stock in confined workshop. Supplied with quick action vice - push the jaw up to the workpiece and then pull the cam action lever to lock. Fully adjustable precision blade guides for accurate cutting and longer blade life. Supplied with anti-vibration feet and workshop stand Model No: SM65 Capacity 90º - Round: Ø105mm Capacity 90º - Sq/Rect, (H x W): 105 x 150mm Capacity 45º - Round: Ø100mm Capacity 45º - Sq/Rect, (H x W): 85 x 65mm Blade Size: 12.7 x 0.7 x 1638mm Blade Speeds: 0.3, 0.5, 0.8mtr/sec Motor Power: 375W Supply: 230V - 1ph Weight: 75kg

Price:£425.00£510.00

Sealey Metal Cutting Bandsaw 3-Speed 150mm 230V

Sealey Metal Cutting Bandsaw 3-Speed 150mm 230V

Fully guarded blade with magnetic no-load voltage switch to prevent motor re-start in the event of power failure or blade jam. Complies with the requirements of the Machinery Safety Directive 98/37/EEC and full CE approved. Fitted with oil-bath gearbox and life lubricated drive bearings for quiet, smooth operation. Heavy-duty cast base and horizontal/vertical cutting arm. Saw base features integral mitring vice with scale of 90° to 45° for angle cutting and fully adjustable precision blade guides for accurate cutting and longer blade life. Stand is fitted with two transport wheels for added workshop mobility. Model No: SM5 Capacity 90º - Round: Ø115mm Capacity 90º - Sq/Rect, (H x W): 100 x 150mm Capacity 45º - Round: Ø60mm Capacity 45º - Sq/Rect, (H x W): 100 x 60mm Blade Size: 12.7 x 0.7 x 1638mm Blade Speeds: 0.3, 0.5, 0.8mtr/sec Motor Power: 375W Supply: 230V - 1ph Weight: 60kg

Price:£350.00£420.00

Sealey Metal Working Lathe 300mm Between Centres

Sealey Metal Working Lathe 300mm Between Centres

Precision built metal working lathe, ideal for the small workshop, professional or home engineer and model maker. Powered by a 300Watt motor this compact unit features variable speed reversible drive and powered cutting facility for right and left hand threads. Supplied with self centring three jaw chuck, four-way tool post, swarf tray and rear splash guard. Complies with Safety of Machinery (Safety) Regulations 1992 (and amendments), is fully CE approved and supplied with emergency stop button and chuck guard. An optional stand is available, order Model No. SM3002ST. Model No: SM3002 Spindle Speed Range: 100-2500rpm Distance Between Centres: 300mm Centre Height: 90mm Maximum Workpiece Diameter: 180mm Spindle Bore: 20mm Spindle Taper: MT3 Tailstock Taper: MT2 Leadscrew: Metric Dimensions: 300 x 300 x 830mm Motor Power: 300W - 230V Weight: 40kg

Price:£845.00£1,014.00

Sealey Metal Working Lathe 500mm Between Centres

Sealey Metal Working Lathe 500mm Between Centres

Quality workshop lathe suitable for a wide range of turning and drilling applications. Features power feed for even surface finish and thread cutting. Four-way tool post mounted on compound slide mechanism enables fast interchange of cutting tools with accurate feed. Powered by 550Watt motor through six-speed gearbox. Incorporates quiet running PTO gearbox with oil bath lubrication for power feed. Supplied with three-jaw chuck, and dead centre. Fitted with no-load voltage release switch. Meets Supply of Machinery (Safety) Regulations 1992 (and amendments). Workshop stand available as an optional extra - Model No. SM27ST. Model No: SM27 Centre Height Over Table: 150mm Centre Height Over Saddle: 80mm Distance Between Centres: 500mm Spindle Bore: Ø26mm Speed Range: 160-1600rpm Head Stock Taper: MT4 Tail Stock Taper: MT3 Tail Stock Travel: 40mm Metric Pitch Quantity: 14 Metric Pitch Range: 0.5-3mm Inch Pitch Quantity: 20 Inch Pitch Range: 11-40tpi Motor Power: 550W Supply: 230V

Price:£1,345.00£1,614.00

Sealey Micro Butane Torch Kit 10pc

Sealey Micro Butane Torch Kit 10pc

Portable and lightweight, suitable for heating, soldering and shrinking plus many other applications. Powered by butane (lighter fluid). Piezoelectric start and anti-flare device enable quick and clean operation. Supplied in storage case.

Price:£36.50£43.80

Sealey Mig 0.6mm Contact Tips (3) & Nozzle Set M5 Thread 100 amp

Sealey Mig 0.6mm Contact Tips (3) & Nozzle Set M5 Thread 100 amp

Sealey Contact Tips Pack of 3 x 0.6mm contact tips and 1 x conical nozzle suitable for use with our range of Mightymig® welders.

Price:£7.35£8.82

Sealey Mig 0.8mm Contact Tips (3) & Nozzle Set M5 Thread 100 amp

Sealey Mig 0.8mm Contact Tips (3) & Nozzle Set M5 Thread 100 amp

Sealey Contact Tips Pack of 3 x 0.8mm contact tips and 1 x conical nozzle suitable for use with our range of Mightymig® welders.

Price:£7.35£8.82

Sealey Mig Conical Gas Nozzles Pkt of 3 150 Amp

Sealey Mig Conical Gas Nozzles Pkt of 3 150 Amp

Pack of conical nozzles suitable for use with Supermig®, Electromig, Powermig® and Automig ranges of MIG welders. Compatible with TB14/15 torches.

Price:£5.95£7.14

Sealey Mig Contact Tips 0.6mm x 5 metre Thread Pkt of 5 100amp

Sealey Mig Contact Tips 0.6mm x 5 metre Thread Pkt of 5 100amp

Sealey Contact Tips Pack of 0.6mm contact tips suitable for our range of Mightymig® welders .

Price:£4.99£5.99

Sealey Mig Contact Tips 0.6mm x 5 metre Thread Pkt of 5 130/150 amp

Sealey Mig Contact Tips 0.6mm x 5 metre Thread Pkt of 5 130/150 amp

Sealey Contact Tips Pack of 0.6mm contact tips suitable for our range of Mightymig® welders.

Price:£5.99£7.19

Sealey Mig Contact Tips 0.8mm x 5 metre Thread Pkt of 5 100amp

Sealey Mig Contact Tips 0.8mm x 5 metre Thread Pkt of 5 100amp

Sealey Contact Tips Pack of 0.8mm contact tips suitable for our range of Mightymig® welders.

Price:£4.75£5.70

Sealey Mig Contact Tips 0.8mm x 5 metre Thread Pkt of 5 130/150 amp

Sealey Mig Contact Tips 0.8mm x 5 metre Thread Pkt of 5 130/150 amp

Sealey Contact Tips Pack of 0.8mm contact tips suitable for our range of Mightymig® welders.

Price:£6.25£7.50

Sealey Mig Cylindrical Staight Gas Nozzles Pkt of 2 250 Amp

Sealey Mig Cylindrical Staight Gas Nozzles Pkt of 2 250 Amp

Pack of cylindrical nozzles suitable for use with Powermig® 2750/3500 Compatible with TB25 Torches

Price:£8.75£10.50

Sealey MIG Gas Hose Adaptor 1.5mtr

Sealey MIG Gas Hose Adaptor 1.5mtr

Convert the small-bore hosing (normally Ø4mm OD) found on portable MIGs For use with industrial size gas regulators and cylinders.

Price:£10.95£13.14

Sealey Mig Tip Adaptor M6 Thread 150 Amp

Sealey Mig Tip Adaptor M6 Thread 150 Amp

Pack of diffuser adaptors suitable for use with Powermig®2750/3500 Compatible with TB25 Torches.

Price:£4.25£5.10

Sealey Mig Tip Adaptor Nozzle Retaining Spring 250 Amp Pkt of 2

Sealey Mig Tip Adaptor Nozzle Retaining Spring 250 Amp Pkt of 2

Pack of nozzle springs suitable for use with Powermig® 2750/3500 Compatible with TB25 Torches

Price:£5.35£6.42

Sealey Mini Drilling & Milling Machine

Sealey Mini Drilling & Milling Machine

Bench mounting mini drilling/milling machine with the flexibility to handle most materials. Features include a 350Watt motor, variable speed drive, working table with T-slots to enable clamping of workpieces and Metric graduated compound scales. The machine also incorporates a tilting column which allows drilling/milling of workpiece at ±45° from vertical. Supplied with 13mm chuck accessory kit for adjusting and setting. Complies with Safety of Machinery (Safety) Regulations 1992 (and amendments) and is fully CE approved. An optional stand is available, order Model No. SM3002ST. A comprehensive range of accessories also available. Model No: SM2502 Drilling Capacity: 13mm Face Mill Capacity: 30mm End Mill Capacity: 16mm Headstock Travel: 180mm Cross Axis: 100mm Longitudinal Axis: 220mm Spindle Tilt Angle: ±45° Spindle Taper: MT3 Spindle Speed - Low Range: 0-1100rpm Spindle Speed - High Range: 0-2500rpm T-Slot: 12mm Motor Power: 350W - 230V Weight: 68kg

Price:£845.00£1,014.00

Sealey Mini Lathe & Drilling Machine

Sealey Mini Lathe & Drilling Machine

Bench mounting, multifunction mini drill, mill and lathe with variable speed giving flexibility to handle most materials Features two 150Watt motors, one to operate the drill/mill and the other to power the lathe. The lathe cutting feed can be power driven or advanced manually. Thread cutting may also be undertaken with the optional thread cutting kit. Supplied with Metric graduated scales and all necessary tools required for setting and adjusting. Complies with Safety of Machinery (Safety) Regulations 1992 (and amendments) and is fully CE approved. An optional stand is available, order Model No. SM3002ST Model No: SM2503 Specification - Cutting: Swing Over Bed: 140mm Distance Between Centres: 250mm Spindle Hole Taper: MT2 Cross Slide Travel: 61mm Tailstock Taper: MT1 Spindle Speed (Variable): 100-2000rpm Range of Metric Threads: 5 Pitches (0.5-1.25mm) Specification - Drilling: Maximum Drilling/Milling Capacity: 10mm Drilling/Milling Spindle Travel: 30mm Drilling/Milling Spindle Speed: 100-1300rpm T-Slot: 8mm Distance from Spindle to Table: 180mm Distance from Spindle Centre to Column: 100mm Motor Power: 2 x 150W - 230V Weight: 50kg

Price:£795.00£954.00

Sealey Multi-Purpose Rotary Tool & Engraver Set 219pc 230V

Sealey Multi-Purpose Rotary Tool & Engraver Set 219pc 230V

Multi-purpose high-speed power tool with on/off and electronic variable speed controls. Stepless control between 8000 and 35000rpm. Spindle lock for fast tool changes. Supplied with a full range of tips, wheels, brushes, sanding discs/bands, dressing stone and chuck spanner. Suitable for carving, shaping, de-burring, drilling, engraving, cutting and tool sharpening. Supplied in carry-case.

Price:£42.95£51.54

Sealey Pillar Drill Bench Premier 16-Speed 1050mm Height 230V

Sealey Pillar Drill Bench Premier 16-Speed 1050mm Height 230V

One of a comprehensive range of bench pillar drills for the professional workshop Meets Safety of Machinery (Safety) Regulations 1992 (and amendments). Features heavy-duty aluminium-bodied motor for long and reliable performance. Electrical circuitry protected with no-volt release switch to prevent inadvertent start up and pulley cover protected by microswitch to prevent drill operating when cover is open. Supplied with flip-up chuck guard. Large sized square table fitted with precision rack and pinion height adjustment. Model No: PDM125B Drilling Capacity (Chuck Size): 16mm Spindle Nose Taper: MT2 Swing: 403mm Spindle Centre to Column: 165mm Spindle Travel: 80mm Number of Speeds: 16 Speed Range: 190-3000rpm Maximum Distance Spindle to Table: 485mm Maximum Distance Spindle to Base: 700mm Working Table Surface Size: 254 x 254mm Working Base Surface Size: 205 x 200mm Overall Base Size: 450 x 270mm Column Diameter: 73mm Collar Diameter: 55mm Overall Height: 1050mm Motor Power: 370W - 230V Input Power: 550W - 230V Weight: 52kg Optional Keyless Chuck 16mm: PDM/KC Integral Work Light: No

Price:£365.00£438.00

Sealey Pillar Drill Bench Premier 16-Speed 1050mm Height 230V PDM155D

Sealey Pillar Drill Bench Premier 16-Speed 1050mm Height 230V PDM155D

One of a comprehensive range of bench pillar drills for the professional workshop. Meets Safety of Machinery (Safety) Regulations 1992 (and amendments). Features heavy-duty aluminium-bodied motor for long and reliable performance. Electrical circuitry protected with no-volt release switch to prevent inadvertent start up and pulley cover protected by microswitch to prevent drill operating when cover is open. Fitted with an integral work light which illuminates the drilling table giving operator a clear view of the drilling process. Supplied with flip-up chuck guard. Large sized square table fitted with precision rack and pinion height adjustment Model No: PDM155B Drilling Capacity (Chuck Size): 16mm Spindle Nose Taper: MT2 Swing: 460mm Spindle Centre to Column: 190mm Spindle Travel: 80mm Number of Speeds: 16 Speed Range: 190-3000rpm Maximum Distance Spindle to Table: 475mm Maximum Distance Spindle to Base: 660mm Working Table Surface Size: 290 x 290mm Working Base Surface Size: 205 x 200mm Overall Base Size: 495 x 290mm Column Diameter: 80mm Collar Diameter: 60mm Overall Height: 1050mm Motor Power: 370W - 230V Input Power: 550W - 230V Weight: 62kg Optional Keyless Chuck 16mm: PDM/KC Integral Work Light: Yes

Price:£425.00£510.00

Sealey Plastic Welding Kit Inc HS102 Hot Air Gun

Sealey Plastic Welding Kit Inc HS102 Hot Air Gun

Hot air gun kit supplied with two plastic welding nozzles, a starter pack of ABS welding rods and a concise instruction manual. Hot air gun HS102 with triple-range variable electronic temperature control. Suitable for plastic welding with nozzles provided and for paint stripping, soft soldering, removing sticky labels, defrosting frozen pipes etc. Model No. HS102K Hot air gun kit supplied with two plastic welding nozzles, a starter pack of ABS welding rods and a concise instruction manual

Price:£121.50£145.80

Sealey Plastic Welding Nozzle

Sealey Plastic Welding Nozzle

Suitable for HS102 and HS102K hot air guns.

Price:£10.84£13.01

Sealey Plastic Welding Reduction Nozzle 9mm

Sealey Plastic Welding Reduction Nozzle 9mm

Reduction Nozzle Suitable for HS102 and HS102K hot air guns.

Price:£7.88£9.46

Sealey Power Hoist 230V/1ph 250kg Capacity

Sealey Power Hoist 230V/1ph 250kg Capacity

Electric wire rope hoist 240 volt 11 metre lift

Price:£115.00£138.00

Sealey Power Hoist 230V/1ph 400kg Capacity

Sealey Power Hoist 230V/1ph 400kg Capacity

This hoist is intended for use where a suitable support facility exists. Approved to EU and UK Lifting Gear Regulations. The support bar is not included

Price:£159.95£191.94

Sealey PP30 Electrodes Pack of 5

Sealey PP30 Electrodes Pack of 5

Pack of 5 electrodes For Sealey PP30 Torch

Price:£28.15£33.78

Sealey PP30 Nozzle Pack of 5

Sealey PP30 Nozzle Pack of 5

Pack of 5 nozzles For Sealey PP30 Torch

Price:£24.50£29.40

Sealey PP40 Nozzle Pack of 5

Sealey PP40 Nozzle Pack of 5

Pack of 5 nozzles For Sealey PP30 Torch

Price:£28.15£33.78

Sealey Recirculating Sand Blasting Kit Extra Heavy-Duty

Sealey Recirculating Sand Blasting Kit Extra Heavy-Duty

Sealey Recirculating Sand Blasting Kit Extra Heavy-Duty. Suitable for use in the bodyshop. The feathering action of this blaster makes it especially good for treating stone chips. Features a forced air powered recirculation system and is additionally fitted with a vacuum tube to increase suction power allowing gun to be used at an angle. Supplied with a set of rubber nozzles for sealing the gun head to the panel. Sets of replacement nozzles are available.

Price:£75.00£90.00

Sealey Reduction Nozzle

Sealey Reduction Nozzle

Reduction Nozzle Suitable for HS100CE (not items 5, 6 & 7), HS102 and HS102K hot air guns. Available separately.

Price:£5.59£6.71

Sealey SD06 6 Watt Battery Operated Solder Kit

Sealey SD06 6 Watt Battery Operated Solder Kit

Powered by three AA cells (not included) and with a fine, replaceable tip, this soldering iron is ideal for printed circuit boards and similar restricted-access work. Heat-on-demand button saves battery power.

Price:£10.95£13.14

Sealey Shot Blasting Beads Glass 5kg Tub

Sealey Shot Blasting Beads Glass 5kg Tub

Shot Blasting Beads Glass Beads suitable for use in shot blasting cabinets.

Price:£19.95£23.94

Sealey Shot Blasting Gauntlets 460mm Cuffed Pair

Sealey Shot Blasting Gauntlets 460mm Cuffed Pair

Suitable for all types of shot/grit blasters. CE Approved protection for hands, wrists and forearms.

Price:£17.95£21.54

Sealey Shot Blasting Kit

Sealey Shot Blasting Kit

Compact and portable shot blasting kit. Large capacity hopper with convenient carry handle and wrap around hose storage. Supplied with 4.5mtr grit hose and fitted with a heavy-duty shot blasting gun 22kg Cappacity

Price:£42.95£51.54

Sealey Shot Blasting Kit 22.6kg Capacity

Sealey Shot Blasting Kit 22.6kg Capacity

Compact and portable shot blasting kit Large capacity hopper with handle and heavy-duty rubber wheels for easy manoeuvrability. Supplied with 3.0mtr grit hose, fitted with a heavy-duty shot blasting gun and four ceramic nozzles

Price:£79.95£95.94

Sealey Shot Blasting Kit 40kg Capacity

Sealey Shot Blasting Kit 40kg Capacity

Compact and portable shot blasting kit. Large capacity hopper with handle and heavy-duty rubber wheels for easy manoeuvrability. Supplied with 3.0mtr grit hose, fitted with a heavy-duty shot blasting gun and four ceramic nozzles.

Price:£109.95£131.94

Sealey Soldering Gun/Iron Kit 8pc 230V

Sealey Soldering Gun/Iron Kit 8pc 230V

A comprehensive soldering set comprising a 100Watt instant heat soldering gun, a 30Watt soldering iron with stand, a third hand support, solder-sucker, scraper/probe, spare soldering tips and a roll of flux cored solder wire. Soldering irons fitted with BS approved 3 pin 230Volt/13Amp plugs.

Price:£30.75£36.90

Sealey Spot Weld Nozzle 150 Amp

Sealey Spot Weld Nozzle 150 Amp

Single Spot Weld Nozzle suitable for use with Powermig® 4500 Compatible with TB36 Torches.

Price:£5.95£7.14

Sealey SSP9 Hand Held Deluxe Mask

Sealey SSP9 Hand Held Deluxe Mask

Hand Held Deluxe Mask BSEN175, BSEN169 - Deluxe mask, supplied with a shade 9 lens, safety lens and an anti-spatter lens. Accepts standard 4-1/4” x 3-1/4” lenses

Price:£19.95£23.94
Price:£17.35£20.82
Price:£17.50£21.00

Sealey Tie Cord Polishing Bonnet 178mm

Sealey Tie Cord Polishing Bonnet 178mm

Suits all makes of electric and air polishing machines. Uses a 100% pure new wool pile to obtain a professional deep polishing effect.

Price:£6.71£8.05

Sealey Window Nozzle

Sealey Window Nozzle

Window Nozzle Suitable for HS100CE (not items 5, 6 & 7), HS102 and HS102K hot air guns. Available separately.

Price:£6.99£8.39

Shot Blaster with Water Trap & Wheels 37ltr

Shot Blaster with Water Trap & Wheels 37ltr

Shot Blaster with Water Trap & Wheels 37ltr Pressurised tank for maximum power. Supplied with 2.4mtr rubber hose, four ceramic nozzles and in-line water trap for moisture-free grit blasting. Also includes bayonet air line coupling and air flow regulator. Accepts a variety of grits up to 80microns and is suitable for stripping rust and paint from wheels, chassis, panels and other corroded/painted surfaces.

Price:£159.95£191.94

Shot Blasting Cabinet Double Access

Shot Blasting Cabinet Double Access

Heavy-duty steel cabinet with toughened glass viewing screen with integral low voltage illumination. Two large side doors provide easy access for bulkier items and includes Ø34mm dust extraction port for a clear view. Overall Size (W x D x H): 690 x 575 x 620mm. Heavy gauntlets provide hand protection and cabinet is supplied with sand blasting gun with 3 spare ceramic nozzles.

Price:£249.99£299.99

SWP Multi Stage 2g Argon Regulator

SWP Multi Stage 2g Argon Regulator

Multi Stage 2g Argon Regulator 10 bar

Price:£40.65£48.78