SWP Products

Below are our SWP products. You can click on each product to view a full description and specification.

Sorting products...Sorting products...

200 Amp Earth Cable Assy 5m x 25mm Cable c/w 25mm Plug & Clamp

200 Amp Earth Cable Assy 5m x 25mm Cable c/w 25mm Plug & Clamp

The electrode holder clamps the end of the electrode with conductive clamps built onto its head. These clamps operate either by twist action or spring-loaded clamp action (Crocodile type). The clamping mechanism allows for the quick release of the remaining unused electrode end (Stub end). To ensure the maximum welding efficiency the electrode has to be firmly clamped into the holder, otherwise poor electrical contact may cause arc instability through voltage fluctuations and overheating of the holder. The welding cable is connected to the holder either mechanically, crimped or soldered. Comes with 400amp clamp

Price:£22.95£27.54

200 Amp Earth Cable Assy 5m x 25mm Cable c/w Lug & Clamp

200 Amp Earth Cable Assy 5m x 25mm Cable c/w Lug & Clamp

The electrode holder clamps the end of the electrode with conductive clamps built onto its head. These clamps operate either by twist action or spring-loaded clamp action (Crocodile type). The clamping mechanism allows for the quick release of the remaining unused electrode end (Stub end). To ensure the maximum welding efficiency the electrode has to be firmly clamped into the holder, otherwise poor electrical contact may cause arc instability through voltage fluctuations and overheating of the holder. The welding cable is connected to the holder either mechanically, crimped or soldered. Comes with 400amp clamp

Price:£34.50£41.40

250 Amp Earth Cable Assy 5m x 25mm Cable c/w 50mm Plug

250 Amp Earth Cable Assy 5m x 25mm Cable c/w 50mm Plug

The electrode holder clamps the end of the electrode with conductive clamps built onto its head. These clamps operate either by twist action or spring-loaded clamp action (Crocodile type). The clamping mechanism allows for the quick release of the remaining unused electrode end (Stub end). To ensure the maximum welding efficiency the electrode has to be firmly clamped into the holder, otherwise poor electrical contact may cause arc instability through voltage fluctuations and overheating of the holder. The welding cable is connected to the holder either mechanically, crimped or soldered. Comes with 400amp clamp

Price:£39.95£47.94

3 Metre 25mm Earth Lead c/w 50mm Plug & 400 Clamp

3 Metre 25mm Earth Lead c/w 50mm Plug & 400 Clamp

The electrode holder clamps the end of the electrode with conductive clamps built onto its head. These clamps operate either by twist action or spring-loaded clamp action (Crocodile type). The clamping mechanism allows for the quick release of the remaining unused electrode end (Stub end). To ensure the maximum welding efficiency the electrode has to be firmly clamped into the holder, otherwise poor electrical contact may cause arc instability through voltage fluctuations and overheating of the holder. The welding cable is connected to the holder either mechanically, crimped or soldered. 3 Metre 25mm Earth Lead 50mm Plug 400amp Clamp

Price:£17.95£21.54

Belt Driven Aria Portable 3/150BP

Belt Driven Aria Portable 3/150BP

A powerful range of the single-phase compressors that can be run off a 230 volt, 13 amp electrical supply. Ideal for the contractor who wants to move from site to site PLEASE NOTE: Mainland UK delivery only All pumps are fitted with cast iron cylinder liners Hardened steel crankshafts Full-sized aluminium pistons with two compression rings and one oil scrapper ring After-coolers on all pumps Fitted air filter & regulator (regulator only on 50lt model) Air receivers to CE standard 87/404 Automatic stop start pressure switches with soft start valves Aerodynamically-moulded belt guard Part No. - 3/150BP Receiver size - 150 Litres Max. Press - 9 Bar Piston disp. - 13.0 cfm Free air del. 9.2 cfm Motor - 3.0/2.2 HP/Kw Dimensions L X W X H cm - 132 x 45 x 95 Net weight - 85Kg

Price:£615.00£738.00

Belt Driven Aria Portable 3/50BP

Belt Driven Aria Portable 3/50BP

A powerful range of the single-phase compressors that can be run off a 230 volt, 13 amp electrical supply. Ideal for the contractor who wants to move from site to site PLEASE NOTE: Mainland UK delivery only Image of the 3/150BP model All pumps are fitted with cast iron cylinder liners Hardened steel crankshafts Full-sized aluminium pistons with two compression rings and one oil scrapper ring After-coolers on all pumps Fitted air filter & regulator (regulator only on 50lt model) Air receivers to CE standard 87/404 Automatic stop start pressure switches with soft start valves Aerodynamically-moulded belt guard Part No. - 3/50BP Receiver size - 50 Litres Max. Press - 9 Bar Piston disp. - 13.0 cfm Free air del. 9.2 cfm Motor - 3.0/2.2 HP/Kw Dimensions L X W X H cm - 80 x 40 x 79 Net weight - 57Kg

Price:£475.00£570.00

Belt Driven Aria Static 3/150BS1

Belt Driven Aria Static 3/150BS1

A powerful range of the single and three phase compressors. With single phase versions that can be run off a 230 volt 13amp electrical plug. Ideal for the contractor who only has a single phase 230 volt electrical supply. PLEASE NOTE: Mainland UK delivery only Image of the 4/200BS1 model All pumps are fitted with cast iron cylinder liners Hardened steel crankshafts Full-sized aluminium pistons with two compression rings and one oil scrapper ring After-coolers on all pumps Air receivers to CE standard 87/404 Automatic stop start pressure switches with soft-start valves A well balanced four-legged air receiver Aerodynamically-moulded belt guard Part No. - 3/150BS1 Receiver size - 150 Litres Max. Press - 9 Bar Piston disp. - 13.0 cfm Free air del. 9.2 cfm Motor - 3.0/2.2 HP/Kw Dimensions L X W X H cm - 132 x 45 x 76 Net weight - 85Kg Phase - 1

Price:£535.00£642.00

Belt Driven Aria Static 3/150BS3

Belt Driven Aria Static 3/150BS3

A powerful range of the single and three phase compressors. With single phase versions that can be run off a 230 volt 13amp electrical plug. Ideal for the contractor who only has a single phase 230 volt electrical supply. PLEASE NOTE: Mainland UK delivery only Image of the 4/200BS1 model All pumps are fitted with cast iron cylinder liners Hardened steel crankshafts Full-sized aluminium pistons with two compression rings and one oil scrapper ring After-coolers on all pumps Air receivers to CE standard 87/404 Automatic stop start pressure switches with soft-start valves A well balanced four-legged air receiver Aerodynamically-moulded belt guard Part No. - 3/150BS3 Receiver size - 150 Litres Max. Press - 9 Bar Piston disp. - 13.0 cfm Free air del. 9.2 cfm Motor - 3.0/2.2 HP/Kw Dimensions L X W X H cm - 132 x 45 x 76 Net weight - 85Kg Phase - 3

Price:£565.00£678.00

Belt Driven Aria Static 3/200BS1

Belt Driven Aria Static 3/200BS1

A powerful range of the single and three phase compressors. With single phase versions that can be run off a 230 volt 13amp electrical plug. Ideal for the contractor who only has a single phase 230 volt electrical supply. PLEASE NOTE: Mainland UK delivery only Image of the 4/200BS1 model All pumps are fitted with cast iron cylinder liners Hardened steel crankshafts Full-sized aluminium pistons with two compression rings and one oil scrapper ring After-coolers on all pumps Air receivers to CE standard 87/404 Automatic stop start pressure switches with soft-start valves A well balanced four-legged air receiver Aerodynamically-moulded belt guard Part No. - 3/200BS1 Receiver size - 200 Litres Max. Press - 9 Bar Piston disp. - 13.0 cfm Free air del. 9.2 cfm Motor - 3.0/2.2 HP/Kw Dimensions L X W X H cm - 145 x 50 x 95 Net weight - 96Kg Phase - 1

Price:£565.00£678.00

Belt Driven Aria Static 3/200BS3

Belt Driven Aria Static 3/200BS3

A powerful range of the single and three phase compressors. With single phase versions that can be run off a 230 volt 13amp electrical plug. Ideal for the contractor who only has a single phase 230 volt electrical supply PLEASE NOTE: Mainland UK delivery only Image of the 4/200BS1 model All pumps are fitted with cast iron cylinder liners Hardened steel crankshafts Full-sized aluminium pistons with two compression rings and one oil scrapper ring After-coolers on all pumps Air receivers to CE standard 87/404 Automatic stop start pressure switches with soft-start valves A well balanced four-legged air receiver Aerodynamically-moulded belt guard Part No. - 3/200BS3 Receiver size - 200 Litres Max. Press - 9 Bar Piston disp. - 13.0 cfm Free air del. 9.2 cfm Motor - 3.0/2.2 HP/Kw Dimensions L X W X H cm - 145 x 50 x 95 Net weight - 98Kg Phase - 3

Price:£590.00£708.00

Belt Driven Aria Static 4/200BS1

Belt Driven Aria Static 4/200BS1

A powerful range of the single and three phase compressors. With single phase versions that can be run off a 230 volt 13amp electrical plug. Ideal for the contractor who only has a single phase 230 volt electrical supply PLEASE NOTE: Mainland UK delivery only Image of the 4/200BS1 model All pumps are fitted with cast iron cylinder liners Hardened steel crankshafts Full-sized aluminium pistons with two compression rings and one oil scrapper ring After-coolers on all pumps Air receivers to CE standard 87/404 Automatic stop start pressure switches with soft-start valves A well balanced four-legged air receiver Aerodynamically-moulded belt guard Part No. - 4/200BS1 Receiver size - 200 Litres Max. Press - 9 Bar Piston disp. - 16.7 cfm Free air del. 11.9 cfm Motor - 4.0/3.0 HP/Kw Dimensions L X W X H cm - 145 x 50 x 100 Net weight - 120Kg Phase - 1

Price:£665.00£798.00

Belt Driven Aria Static 55/200BS3

Belt Driven Aria Static 55/200BS3

A powerful range of the single and three phase compressors. With single phase versions that can be run off a 230 volt 13amp electrical plug. Ideal for the contractor who only has a single phase 230 volt electrical supply PLEASE NOTE: Mainland UK delivery only Image of the 4/200BS1 model All pumps are fitted with cast iron cylinder liners Hardened steel crankshafts Full-sized aluminium pistons with two compression rings and one oil scrapper ring After-coolers on all pumps Air receivers to CE standard 87/404 Automatic stop start pressure switches with soft-start valves A well balanced four-legged air receiver Aerodynamically-moulded belt guard Part No. - 55/200BS3 Receiver size - 200 Litres Max. Press - 10 Bar Piston disp. - 20.6 cfm Free air del. 17.1 cfm Motor - 5.5/4.0 HP/Kw Dimensions L X W X H cm - 145 x 50 x 104 Net weight - 123Kg Phase - 3

Price:£855.00£1,026.00

Belt Driven Aria Static 75/200BS3

Belt Driven Aria Static 75/200BS3

A powerful range of the single and three phase compressors. With single phase versions that can be run off a 230 volt 13amp electrical plug. Ideal for the contractor who only has a single phase 230 volt electrical supply. PLEASE NOTE: Mainland UK delivery only Image of the 4/200BS1 model All pumps are fitted with cast iron cylinder liners Hardened steel crankshafts Full-sized aluminium pistons with two compression rings and one oil scrapper ring After-coolers on all pumps Air receivers to CE standard 87/404 Automatic stop start pressure switches with soft-start valves A well balanced four-legged air receiver Aerodynamically-moulded belt guard Part No. - 75/200BS3 Receiver size - 200 Litres Max. Press - 10 Bar Piston disp. - 28.2 cfm Free air del. 22.3 cfm Motor - 7.5/5.5 HP/Kw Dimensions L X W X H cm - 145 x 50 x 107 Net weight - 147Kg Phase - 3

Price:£1,045.00£1,254.00

Black Economy Flip-Up 4¼ x 2

Black Economy Flip-Up 4¼ x 2

Flip Up Headscreen 4 1/4” x 2”

Price:£12.45£14.94

Brazing Carbons 8mm

Brazing Carbons 8mm

Brazing Carbon with a diameter of 8mm Quantity: 1 carbon

Price:£1.75£2.10

Disposable Mig Weld Gas Cylinders

Disposable Mig Weld Gas Cylinders

Gas Cylinders Available in: CO2 CO2 / Argon Mix Argon

Price:£9.95£11.94

Fire Retardent Blanket

Fire Retardent Blanket

Fibre Glass Welding Blanket - 600° Available in sizes: 1000mm x 2000mm 2000mm x 2000mm 3000mm x 2000mm

Price:£42.00£50.40

Flux Coated Brazing Rods

Flux Coated Brazing Rods

This rod is with a full flux coating providing the added benefit of faster, continuous brazing through not having to flux-dip. It is ideally suited for general mild steel work, galvanised steel and dissimilar metal applications.

Price:£31.95£38.34

Flux Cored Gasless MIG Wire

Flux Cored Gasless MIG Wire

Good quality welding wire conforming to all current specifications. Ensure that MIG welding wire is always kept in a dry place to avoid any corrosion. Mig wire in two diameters for welding various materials 0.8mm x 0.5kg 0.8mm x 1.0kg 0.9mm x 0.5kg Conforms to all current specifications

Price:£6.95£8.34

Grey Chrome Leather Flame Retardent Gaiters

Grey Chrome Leather Flame Retardent Gaiters

Chrome Leather Gaiters 12” Velcro

Price:£12.50£15.00

Itex Blue Minor Flip-Up

Itex Blue Minor Flip-Up

Blue Minor Helmet 4 1/4” x 3 1/4”

Price:£31.50£37.80

Jackson TL Airfed Multiview Welding/Grinding Helmet

Jackson TL Airfed Multiview Welding/Grinding Helmet

Jackson TL Airfed Multiview Welding/Grinding Helmet Comfort headgear with pivot pad Lens can be set to shades 9 to 13 Lens will automatically switch to shade 4 when welding stops. IRUV Shade 5 side windows offer increased peripheral vision and safety High-Low sensitivity dial 3 independent sensors for better arc detection Variable delay dial (0.1-0.9s) Switching speed: 0.4ms

Price:£450.00£540.00

Multi Type Tungsten Gold Tip

Multi Type Tungsten Gold Tip

Multi Type Tungsten Gold Tip For TIG welding of any ferrous or non ferrous metal with either DC or AC current. Price per tungsten

Price:£0.69£0.83

Prota Shell Baby 4¼ x 2 Flip Up Mask

Prota Shell Baby 4¼ x 2 Flip Up Mask

Prota Shell Baby Flip Up Headscreen 4 ¼” x 2”

Price:£37.50£45.00

Red Heat Resistant Leather Welders Jacket

Red Heat Resistant Leather Welders Jacket

Worn over garments to protect upper body & arms from spatter, sparks and heat. Velcro & popper fastenings with covering flap. Kevlar Stitched Medium - 38" - 40" Large - 42" - 44" X-Large - 46" - 48"

Price:£27.50£33.00

Red Pearlescent Variable Shade 9-13

Red Pearlescent Variable Shade 9-13

This variable shade welding headshield is suitable for Tig welding, Mig welding & Arc welding with sensitivity and delay time switches. Thick durable construction Recessed lens Internal sensitivity & delay controls 2 year warranty on lens 110 x 90mm front cover lens (3024)

Price:£45.00£54.00

Super Heating Neck Bent 700mm

Super Heating Neck Bent 700mm

Super Heating Neck Bent 700mm

Price:£16.50£19.80

SWP Dinse Panel MTD Socket

SWP  Dinse Panel MTD Socket

Dinse Type Panel Socket

Price:£0.95£1.14

SWP 1/4” Argon Hose

SWP 1/4” Argon Hose

1/4” Argon Hose £0.35 per metre Full roll: 30m

Price:£0.35£0.42

SWP 10m Twin Hose Oxygen/Acetylene C/W 3/8in Fittings

SWP 10m Twin Hose Oxygen/Acetylene C/W 3/8in Fittings

10mm x 10m Twin Hose Oxygen/Acetylene Comes with 3/8in Fittings

Price:£26.95£32.34

SWP 10mm x 20m Propane Hose Set

SWP 10mm x 20m Propane Hose Set

Propane Hose Set 10mm x 20m Propane Hose Set

Price:£43.50£52.20

SWP 110 x 60mm Shade Lens

SWP 110 x 60mm Shade Lens

Shade Lens 110 x 60mm EN 169 Shades 9, 10 & 11 available

Price:£0.49£0.59

SWP 110 x 90mm Shade 11 Lens

SWP 110 x 90mm Shade 11 Lens

Shade 11 Lens 110 x 90mm Shade 11 Lens

Price:£2.70£3.24

SWP 1365 Water Based Anti-Spatter 5L

SWP 1365 Water Based Anti-Spatter 5L

A water-based, silicone-free, non-toxic, non-flammable anti-spatter solution that does not contain harmful solvents which can smoke and produce harmful fumes. Does not affect weld porosity. Use to prolong tip & shroud life and to prevent adhesion of weld spatter to the area surrounding the weld zone

Price:£7.28£8.74

SWP 18" Cutting Torch

SWP 18" Cutting Torch

SWP 18" Cutting Torch For use with NM style cutting nozzles (Type 5 Cutting Equipment- Acetylene Cutting Nozzles).

Price:£25.00£30.00

SWP 2 Row Wire Brush

SWP 2 Row Wire Brush

Wire Brush 2 Row Wire Brush

Price:£0.72£0.86

SWP 2” Dia. Shaded Lens

SWP 2” Dia. Shaded Lens

Shaded Lens EN 169 Shade 3,4 or 5

Price:£0.41£0.49
Price:£4.75£5.70
Price:£0.65£0.78
Price:£0.65£0.78

SWP 3 Row Wire Brush

SWP 3 Row Wire Brush

Wire Brush 3 Row Wire Brush

Price:£0.71£0.85

SWP 300ºC Portable Oven 13.6kg 110/240 volt

SWP 300ºC Portable Oven 13.6kg  110/240 volt

The portable drying oven is designed to operate in rugged site conditions Thermostatically controlled temperature range of 100-300?C Capacity: 13.6kgs

Price:£245.00£294.00

SWP 3037 Variable Shade Helmet

SWP 3037 Variable Shade Helmet

Choice of four colours Cartridge size: 110 x 90mm Viewing area: 92 x 42mm Adjustable stepless sensitivity Two detection sensors

Price:£40.00£48.00
Price:£1.40£1.68
Price:£1.75£2.10
Price:£1.40£1.68

SWP 4 ¼" x 2” Shade Lens

SWP 4 ¼" x 2” Shade Lens

Shade Lens 4 1/4" x 2” Shade Lens EN 169

Price:£0.41£0.49

SWP 4 1/4 x 3 1/4” Shade Lens

SWP 4 1/4 x 3 1/4” Shade Lens

Shade Lens 4 1/4 x 3 1/4” EN 169 Shades 5,8,9,10,11 & 12 available

Price:£0.58£0.70

SWP 4 Row Mild Steel Wire Brush

SWP 4 Row Mild Steel Wire Brush

Wire Brush 4 Row Wire Brush

Price:£1.31£1.57

SWP 4 Row Wire Brush With Scraper

SWP 4 Row Wire Brush With Scraper

4 Row Wire Brush With Scraper 4 Row Wire Brush with Scraper

Price:£2.50£3.00

SWP 4¼ x 2” Shade 13 Lens

SWP 4¼ x 2” Shade 13 Lens

Shade Lens 41?4 x 2” Shade 13 Lens

Price:£0.41£0.49

SWP 400 Amp CC11 Screw Type Earth Clamp

SWP 400 Amp CC11 Screw Type Earth Clamp

400 Amp CC11 Screw Type Earth Clamp Earth Clamp Screw CC11 600amp The screw lever allows maximum compression to the workpiece.

Price:£3.75£4.50

SWP 400 Amp Red Handle Pistol Grip Electrode Holder

SWP 400 Amp Red Handle Pistol Grip Electrode Holder

Twist type 400Amp Electrode holder. Twist Type PG 400amp Red Handle

Price:£3.75£4.50

SWP 400 Amp Twist Type Electrode Holder

SWP 400 Amp Twist Type Electrode Holder

Twist Type Electrode Holder 400 Amp 405 equivalent

Price:£3.75£4.50

SWP 5 ¼" x 4 ½” Shade Lens

SWP 5 ¼" x 4 ½” Shade Lens

Shade Lens 5 1/4" x 4 1/2” Shades 10 & 11 Available EN 169

Price:£2.58£3.10
Price:£1.75£2.10
Price:£1.75£2.10

SWP 5m Oxygen/Propane Twin Hose Set 3/8in Fitting

SWP 5m Oxygen/Propane Twin Hose Set 3/8in Fitting

5m Oxygen/Propane Twin Hose Set Comes with 3/8in Fitting

Price:£17.95£21.54

SWP 600 Amp Bronze Jaw Screw Type Earth Clamp

SWP 600 Amp Bronze Jaw Screw Type Earth Clamp

600 Amp Bronze Jaw Screw Type Earth Clamp Earth Clamp Screw 600amp Bronze lower jaw

Price:£5.05£6.06

SWP 600 Amp Red Handle Pistol Grip Electrode Holder

SWP 600 Amp Red Handle Pistol Grip Electrode Holder

Twist Type PG 600amp Red Handle Twist Type PG 600amp Red Handle

Price:£5.10£6.12

SWP 600 Amp Steel Screw Type Earth Clamp

SWP 600 Amp Steel Screw Type Earth Clamp

600 Amp Steel Screw Type Earth Clamp Earth Clamp Screw 600amp

Price:£3.30£3.96

SWP 600 Amp Yellow Handle Twist Grip Electrode Holder

SWP 600 Amp Yellow Handle Twist Grip Electrode Holder

Twist Type 600amp Yellow Handle LC Twist Type 600amp Yellow Handle

Price:£5.10£6.12

SWP 6mm x 20m Propane Hose Set

SWP 6mm x 20m Propane Hose Set

Propane Hose Set 6mm x 20m

Price:£33.50£40.20
Price:£2.21£2.65
Price:£2.21£2.65

SWP 9800 Arc 120 Stick Inverter

SWP 9800 Arc 120 Stick Inverter

The Arc 120 Inverter from SWP is a 120a Arc Inverter, Capable of using Welding Rods from 1.6mm - 3mm. Input Power 230 volt (single phase) + or – 15% Fuse Rating 13 Amps Generator Required 3.8 KVA Output Power 10 – 120 Amps Duty Cycle 120 Amps @ 60% Weight 5 KG Dimensions 230 x 120 x 170mm Electrode Size 1.6 – 3.2mm

Price:£199.00£238.80

SWP A-FN Style Cutting Nozzle

SWP A-FN Style Cutting Nozzle

A-FN Style Cutting Nozzle A-FN Style Cutting Nozzles

Price:£4.50£5.40

SWP A-FN Style Mini Acetylene Cutting Nozzle 3/64"

SWP A-FN Style Mini Acetylene Cutting Nozzle  3/64"

A-FN Style Mini Acetylene Cutting Nozzle 3/64"

Price:£5.23£6.28

SWP Acetylene Gouging Nozzle

SWP Acetylene Gouging Nozzle

Acetylene Gouging Nozzle Available in a variety of sizes

Price:£8.00£9.60

SWP Adaptor: 3/8" Female-1/4" Male LH

SWP Adaptor: 3/8"  Female-1/4" Male LH

3/8” Nut - 1/4” Thread LH Straight Adaptor

Price:£2.05£2.46

SWP Adaptor: 3/8" Female-1/4" Male RH

SWP Adaptor: 3/8"  Female-1/4" Male RH

3/8” Nut - 1/4” Thread RH Straight Adaptor

Price:£2.05£2.46

SWP Aluminium Grade 4043 NG21 5% Silicon Mig Wire Mini Spool

SWP Aluminium Grade 4043 NG21 5% Silicon Mig Wire Mini Spool

ER4043 0.8mm diameter NG21 4043 aluminium mig wire containing 5% silicon. Suitable for welding 6063/H9, 6061/H20 & 6082/H30 grade aluminium. Supplied on 0.5 kilo spool Three sizes: 0.8mm x 0.5kg 1.0mm x 0.5kg 1.2mm x 0.5kg

Price:£5.50£6.60

SWP Aluminium Grade 5356 NG6 5% Magnesium Mig Wire Mini Spool

SWP Aluminium Grade 5356 NG6 5% Magnesium Mig Wire Mini Spool

ER5356 0.8mm diameter NG6 5356 aluminium mig wire containing 5% magnesium. Suitable for welding 5251/N4, 5154/N5, 5454/N51 6063/H9, 6061/H20, 6082/H30 grade aluminium. Supplied on 0.5 kilo spool. Three sizes: 0.8mm x 0.5kg 1.0mm x 0.5kg 1.2mm x 0.5kg

Price:£5.50£6.60

SWP Arc 140 Inverter Dual Voltage

SWP Arc 140 Inverter Dual Voltage

The Arc 140 DV Inverter from SWP is a 140a Dual Voltage Arc Inverter, Capable of using Welding Rods from 1.6mm - 3.2mm. Rugged Internal Support Frame Generator Friendly Dual Voltage - Suitable For Site Work Supplied in Case with Accessories 1 Year Warranty span style="font-weight:bold;">Fuse Rating 110V -15 amps/ 240V 13 amps Generator Friendly + / – 15% Input Power Voltage 110/230V (single phase) Rate Input Power Capacity 4.4 KVA Input voltage frequency 50 / 60 Hz Output Current Range 10 – 140 amps Duty Cycle (25°C) 110V 100 amps @ 100% 240V 140 amps @ 60% Weight 6.4 kg Overall Dimensions 290 x 132 x 216mm Protection Class Ip23 Diameter of rod 1.6mm – 3.2mm Accessories Included Supplied in an aluminium case containing: 3mtr earth clamp and cable 3mtr electrode Holder and cable Wire brush Chipping hammer Handscreen

Price:£240.00£288.00

SWP Arc 140 Invertor

SWP Arc 140 Invertor

Capable of using Welding Rods from 1.6mm - 3.2mm. Rugged Internal Support Frame Generator Friendly Supplied in Case with Accessories 1 Year Warranty Fuse Rating 13 amp Generator Friendly + / – 15% Input Power Voltage AC 230 (single phase) Rate Input Power Capacity 3.0 KVA Input voltage frequency 50 / 60 Hz Output Current Range 10 – 140 amps Duty Cycle (25°C) 140 amps @ 30% Weight 4 kg Overall Dimensions 230 x 120 x 170mm Protection Class Ip21 Diameter of rod 1.6mm – 3.2mm Accessories Included Supplied in an aluminium case containing: 3mtr earth clamp and cable 3mtr electrode Holder and cable Wire brush Chipping hammer Handscreen

Price:£205.00£246.00

SWP Arc 160

SWP Arc 160

Special offer Buy this MMA Invertor and get a SWP 3037 Black Variable Shade Helmet and a SWP Red Lined Gauntlet ABSOLUTELY FREE!! Arc 160 inverter dual voltage Rugged internal support frame Generator friendly Excellent duty cycle Arc force for easy electrode striking

Price:£269.00£322.80

SWP Arc 160 Inverter

SWP Arc 160 Inverter

Stick Invertor from SWP Rugged internal support frame Arc force for easy electrode striking Generator friendly Excellent duty cycle Supplied in carry case with accessories and carry strap Fuse Rating : 17 AMP I1 Mac : 31 AMP Input Power Voltage : AC230 Rate Input Power Capacity : 7.1kVA Input Voltage Frequency : 50/60 Hz Output Current Range : 10-160Amps Duty Cycle (25°) @ 60% : 160 Amps Weight : 5.2kg Dimensions : 313mm x 120mm x 198mm Protection Class : IP21 Rod Diameter : 1.6mm – 4.0mm

Price:£235.00£282.00

SWP Arc 200B Inverter

SWP Arc 200B Inverter

The Arc 200 Inverter from SWP is a 200a MMA Arc Inverter, Capable of using Welding Rods from 1.6mm - 5.0mm. Rugged Internal Support Frame Generator Friendly Excellent Duty Cycle Variable Arc Force for Easy Electrode Striking 1 Year Warranty span style="font-weight:bold;">Fuse Rating 20 amp Generator Friendly + / – 10% Input Power Voltage AC 230 (single phase) Rate Input Power Capacity 7.0 KVA Input voltage frequency 50 / 60 Hz Output Current Range 20 – 200 amps Duty Cycle (25°C) 200 amps @ 60% Weight 10 kg Overall Dimensions 425 x 205 x 355mm Protection Class Ip23 Diameter of rod 1.6mm – 5.0mm Accessories Included 3mtr earth clamp and cable 3mtr electrode Holder and cable

Price:£345.00£414.00

SWP Argon Gas Flowmeter

SWP Argon Gas Flowmeter

SWP Argon Gas Flowmeter Designed primarily for use with shielding gases used in MIG and TIG welding applications. The accuracy of gas flow control is greatly increased by use of a flowmeter and has the added benefit of giving a visual indication of when gas is actually flowing.

Price:£11.50£13.80

SWP B630 Sperian Flip-Up 4-¼ x 2

SWP B630 Sperian Flip-Up 4-¼ x 2

The welding helmet provides comfort and protection for most welding applications. Contains a passive welding filter DIN11 Flips up Lens size: 108 x 50mm

Price:£34.99£41.99

SWP Black Handle Crocodile Electrode Holder

SWP Black Handle Crocodile Electrode Holder

Crocodile Holder Available in 200amp & 400 amp

Price:£2.45£2.94

SWP Black Heavy Duty Knee Pads

SWP Black Heavy Duty Knee Pads

Black Heavy Duty with Velcro Strap

Price:£16.95£20.34

SWP Black Mask 4¼ x 3¼

SWP Black Mask 4¼ x 3¼

Headscreen 4 1/4” x 3 1/4”

Price:£6.19£7.43

SWP Black PVC Single Insulated Copper Welding Cable

SWP Black PVC Single Insulated Copper Welding Cable

For use as a quality Welding Cable, its outer sheath is oil and water resistant. It also has good resistance to both UV and flames. It’s flexibility makes it a joy to handle and it carries CE marking on the sheath. Priced per Metre 16mm Cable - Black (152amps) 25mm Cable - Black (200amps) 35mm Cable - Black (252amps) 50mm Cable - Black (322amps) 70mm Cable - Black (400amps)

Price:£1.51£1.81

SWP Blue Brand Auto Hood

SWP Blue Brand Auto Hood

Thick durable construction with a recessed lens Internal sensitivity & delay controls 2 year warranty on lens 110 x 90mm front cover lens (3024)

Price:£45.00£54.00

SWP Bolt On Reusable Cable Lug

SWP Bolt On Reusable Cable Lug

Reusable Cable Lug 25mm Lug (200amp) 35mm Lug (300amp) 50mm Lug (400amp)

Price:£0.79£0.95

SWP Canadian Rigger Gloves

SWP Canadian Rigger Gloves

Canadian Rigger For General Handling Knuckle Protection Wing Thumb

Price:£1.19£1.43

SWP Carbon Gouging Rod

SWP Carbon Gouging Rod

Use for cutting, welding, defects removing, making holes, welding inspection and removing over-welded parts. Sold in packs of 100

Price:£0.08£0.10

SWP Ceriated Tungsten Grey Tip

SWP Ceriated Tungsten Grey Tip

Ceriated Tungsten Grey Tip Multi-Purpose Ceriated (Grey Tip) Tungsten Electrodes Suitable for both AC & DC use 1.0mm, 1.6mm, 2.4mm & 3.2mm diameters Sold individually

Price:£0.65£0.78

SWP Chrome Leather Apron & Ties 24 x 36

SWP Chrome Leather Apron & Ties 24 x 36

Ideal for welding applications. Complete with ties. 24” x 36”

Price:£6.41£7.69

SWP Chrome Leather Jacket Large

SWP Chrome Leather Jacket Large

Ideal for protection from welding splatter. High quality chrome leather with Velcro and popper fastenings XL 46–48”

Price:£23.10£27.72

SWP Clear Face Screen

SWP Clear Face Screen

Clear Face Screen Clear Face Screen 8” x 12”

Price:£7.95£9.54

SWP Coloured Visitor Spectacles

SWP Coloured Visitor Spectacles

Coloured Visitor Spectacles Vented, Anti-Mist, Anti UV

Price:£2.95£3.54

SWP Combination Spanner

SWP Combination Spanner

Gas bottle combination spanner and key for welding gas bottles DF combination spanner

Price:£2.10£2.52

SWP Copper Coated Mild Steel Gas Weld Rods

SWP Copper Coated Mild Steel Gas Weld Rods

Used in gas welding mild steel. Available C.C.M.S. 1.6mm 5kg C.C.M.S. 2.4mm 5kg C.C.M.S. 3.2mm 5kg

Price:£10.95£13.14

SWP Crack Detector Cleaner - 400ml

SWP Crack Detector Cleaner - 400ml

This is a fast drying solvent cleaner designed primarily as part of a three part system for the non-destructive assessment of cracks and surface defects on metallic surfaces. 400ml

Price:£4.25£5.10

SWP Crack Detector Developer - 400ml

SWP Crack Detector Developer - 400ml

3 part system to highlight cracks and flaws in a finished weld. 400ml

Price:£4.95£5.94

SWP Crack Detector Penetrant - 400ml

SWP Crack Detector Penetrant - 400ml

3 part system to highlight cracks and flaws in a finished weld. 400ml

Price:£4.35£5.22

SWP Crocodile Earth Clamp

SWP Crocodile Earth Clamp

Crocodile Earth Clamp Available in:200 Amp400 Amp

Price:£0.90£1.08

SWP Double Outlet LH Y-Piece

SWP Double Outlet LH Y-Piece

Double Outlet with valves

Price:£8.81£10.57

SWP Double Outlet RH Y-Piece

SWP Double Outlet RH Y-Piece

Double Outlet with valves

Price:£5.95£7.14

SWP Drop Forged Spindle Key

SWP Drop Forged Spindle Key

Drop Forged Spindle Key Drop Forged Spindle Key

Price:£0.50£0.60

SWP Ear Defenders

SWP Ear Defenders

Lightweight yet rugged construction offering protection Sound Reduction Value 19

Price:£2.89£3.47

SWP Easy Fit Crimp on Cable Lug

SWP Easy Fit Crimp on Cable Lug

Easy Fit Crimp on Cable Lug 35mm Lug (300amp) 50mm Lug (400amp)

Price:£0.90£1.08

SWP Eliminator Automatic Darkening Welding Helmet

SWP Eliminator Automatic Darkening Welding Helmet

Thick durable construction with recessed lens Variable shade 9-13 Internal sensitivity & delay controls 2 year warranty on lens 110 x 90mm front cover lens (3024) Grinding lens feature

Price:£71.50£85.80

SWP Flat French Chalk

SWP Flat French Chalk

A natural compact talc made from a soft magnesium silicate mineral (MgH 2 (SiO 3)4) also known as Steatite or Soapstone. Quantity: 144

Price:£10.80£12.96

SWP Flat French Chalk Holder

SWP Flat French Chalk Holder

A slimline holder which sits comfortably in the hand or pocket, designed to allow 5x12mm French chalk 'flats' to be dispensed and retracted as needed and protects from unecessary breakage when in use. Square French Chalk

Price:£0.55£0.66

SWP Flip-Up Goggles 2” Lens

SWP Flip-Up Goggles 2” Lens

Flip-Up Goggles 2” Lens Shade 5 EN 169

Price:£2.95£3.54

SWP Flux Impregnated Brazing Rods

SWP Flux Impregnated Brazing Rods

A ready fluxed silicon bronze rod. The flux is held in serrations down the length of the rod. It is suitable for welding brass and general purpose brazing of copper and steel. Fast flowing rod with a melting point of 875C.

Price:£39.95£47.94

SWP Furniture Hide Rigger Gloves

SWP Furniture Hide Rigger Gloves

Furniture Hide Rigger Gloves Standard quality grey leather Rigger Glove. Stiff cuff.

Price:£1.27£1.52

SWP Gas Torch Neck 10.5in Stainless Steel

SWP Gas Torch Neck 10.5in Stainless Steel

Stainless Steel bent heating neck Stainless Steel 10.5” Bent Neck

Price:£11.50£13.80

SWP Gemini Twin Welding Hose

SWP Gemini Twin Welding Hose

Twin Oxy/Acet. Hose Sold per metre in various sizes: 6, 8, 10mm.

Price:£1.30£1.56

SWP Hammer on Cable Lug

SWP Hammer on Cable Lug

Hammer on Cable Lug 70mm Lug (660amp) 95mm Lug (900amp)

Price:£1.01£1.21

SWP Handheld Mask 4¼ x 3¼

SWP Handheld Mask 4¼ x 3¼

910 Handscreen Shallow / Flat - 4 1/4” x 3 1/4”

Price:£9.95£11.94

SWP Hi-Lo Heating Nozzle 3HC

SWP Hi-Lo Heating Nozzle 3HC

Hi-Lo Heating Nozzle 3HC 3 H Heating Nozzle

Price:£9.50£11.40

SWP Hose Splicer

SWP Hose Splicer

Hose Splicer Sizes Available: 6mm 8mm 10mm

Price:£0.50£0.60

SWP Hose Tail

SWP Hose Tail

Hose tail Hose tail

Price:£0.60£0.72

SWP K4000 Torch 600amp (angled head)

SWP K4000 Torch 600amp (angled head)

The K4000 type gouging torch is a heavy-duty, 1000Amp carbon-arc gouging torch with a built-in 15º angled head and 360º 7ft swivel cable assembly. Complete with 6ft monocable

Price:£54.95£65.94

SWP Large Circle Cutting Attachment

SWP Large Circle Cutting Attachment

Large Circle Cutting Attachment Large Circle Cutting Attachment

Price:£32.50£39.00

SWP Leather Bib Style Flame Retardent Apron 24 x 42

SWP Leather Bib Style Flame Retardent Apron 24 x 42

Ideal for welding applications. Complete with ties. Chrome Leather Apron & Ties 24” x 42”

Price:£8.25£9.90

SWP Leather Welders Apron 24 x 42

SWP Leather Welders Apron 24 x 42

Ideal for welding applications. Complete with ties. Red heat resistant leather bib type Kelvar Stitched 24” x 42”

Price:£12.38£14.86

SWP Lightweight Swaged Welding Nozzle

SWP Lightweight Swaged Welding Nozzle

Lightweight Swaged Welding Nozzle High performance welding nozzles Guaranteed quality, performance & safety

Price:£2.00£2.40

SWP Male Coupler

SWP Male Coupler

Male Coupler male coupler

Price:£0.55£0.66

SWP MIG 150 Turbo

SWP MIG 150 Turbo

he SWP 150 Turbo is a gas or gasless Mig welder thats perfectly suited for hobby and workshop use, this mig welder package complete with MB15 mig torch,earth return lead . Input 230v output 30-150 amps 4 voltage settings Takes 1/2 and 5 kilo wire spools Weight 26kg welding wire 0.6 and 0.8mm 430x270x345mm fan cooled flux cored wire compatable. thermal overload protection with warning light.

Price:£225.00£270.00

SWP MIG 170 Turbo

SWP MIG 170 Turbo

The SWP Redline Mig 170 turbo mig welder is ideally suited to repairs,maintenance, DIY and hobby use. With exellent arc characteristics,durable cabinet construction and quality components normally only seen on high end professional equipment. Suitable for workshop use Forced air cooling Thermal protection with warning light Robust steel feed mechanism Robust front and rear wheels Accepts 5 or full 15kg wire reels 0.6-0.8mm welding wire diameter Euro professional welding torch Weight 40 kg Dimensions 800Lx460Wx686Hmm Setting Range 40 - 170 A Input Voltage 230 V Single Phase Fuse 16A Max output at 15% duty cycle 140A Max output at 60% duty cycle 70A Max output at 100% duty cycle 55A Voltage Steps 6 Wire Diameter 0.6 / 0.8 mm Torch MB15 3m Euro Connect

Price:£325.00£390.00

SWP MIG 180 Turbo

SWP MIG 180 Turbo

The SWP Redline Mig 180 turbo mig welder is ideally suited to repairs,maintenance, DIY and hobby use. With exellent arc characteristics,durable cabinet construction and quality components normally only seen on high end professional equipment. Suitable for workshop use Forced air cooling Stable output by large capacity filter Thermal protection with warning light Robust steel feed mechanism Robust front and rear wheels Accepts 5 or full 15kg wire reels 0.6-0.8mm welding wire diameter Euro professional welding torch connector Flux cored wire compatible Weight 42 kg Dimensions 800Lx460Wx686Hmm Setting Range 40 - 180 A Input Voltage 230 V Single Phase Fuse 16A Max output at 15% duty cycle 180A Max output at 60% duty cycle 90A Max output at 100% duty cycle 70A Voltage Steps 6 Wire Diameter 0.6 / 0.8 mm Torch MB15 3m Euro Connect

Price:£360.00£432.00

SWP MIG 210 Turbo

SWP MIG 210 Turbo

The SWP Redline Mig 210 turbo mig welder is ideally suited to repairs,maintenance, DIY and hobby use. With exellent arc characteristics,durable cabinet construction and quality components normally only seen on high end professional equipment. Suitable for workshop use Forced air cooling Stable output by large capacity filter Thermal protection with warning light Robust steel feed mechanism Robust front and rear wheels Accepts 5 or full 15kg wire reels 0.6-0.8mm welding wire diameter Euro professional welding torch connector Flux cored wire compatible Weight 44 kg Dimensions 800Lx460Wx686Hmm Setting Range 45 - 210 A Input Voltage 230 V Single Phase Fuse 20A Max output at 15% duty cycle 210A Max output at 60% duty cycle 105A Max output at 100% duty cycle 80A Voltage Steps 6 Wire Diameter 0.6 / 0.8/1.0 mm Torch MB25 3m Euro Connect

Price:£375.00£450.00

SWP MIG 300 + WF400

SWP MIG 300 + WF400

The MIG 300 + WF400 is a robust and power-efficient three phase machine for spot and stitch welding. It is ideally suited to medium to heavy fabrication and requires only a 16A fuse. A full size cabinet can accept a full height gas cylinder and large diameter wheels means it can be moved from job to job with little risk of toppling. With a separate 4-roll wire feed unit the WF400 has its own wheeled undergear for increased manoeuvrability. The WF400 features SWP’s renowned all-geared drive system, minimising the risk of wire slip and so creating uniform welds. With its 5 metre interconnection and 4 metre welding torch, a work radius of 9 metres is easily achieved. The unit is also suitable for use with spool on-gun or pushpull gun, allowing for increased work radius for up to 13 metres. PLEASE NOTE: Mainland UK delivery only Copper transformer and choke Forced air fan cooling Overload warning indicator Heavy duty front and rear wheels All geared 4-roll feed system Cylinder support straps for gas cylinder Infinitely variable wire speed Spot weld timer Burnback control Stitch welding Soft arc technology Digital volt and amp meter Torch and regulator included Optional mounting post and wheels available for wire feed unit

Price:£1,430.00£1,716.00

SWP MIG 420S + WF400

SWP MIG 420S + WF400

The MIG 420S + WF400 is a robust three phase machine ideally suited to medium to heavy fabrication and requires only a 20A fuse. Its full size cabinet can accept a full height gas cylinder and its large diameter wheels means it can be moved from job to job with little risk of toppling. Its separate four roll wire feed unit (the WF400) has its own wheeled undergear, increasing manoeuvreability. The WF400 features SWP renowned all-geared drive system, thus minimising the risk of wire slip and making welds uniform. Further, with its 5 metre interconnection and 4 metre welding torch, this gives a working radius of 9 metres. The unit is also suitable for use with spool-on gun or push-pull gun, for increased work radius up to 13 metres. The MIG 420S + WF400’s ability to take larger diameter wire than lower power units in the range means it can weld thicker plate, and its 21 switch settings allows for fine tuning of the output power. PLEASE NOTE: Mainland UK delivery only Copper transformer and choke Forced air fan cooling Overload warning indicator Heavy duty front and rear wheels All geared cast feed system Cylinder support chain Infinitely variable wire speed Spot weld timer Burnback control Stitch welding Soft arc technology Digital volt and amp meter Torch and regulator included Optional mounting post and wheels available for wire feed unit

Price:£1,500.00£1,800.00

SWP Multi Purpose MIG Pliers

SWP Multi Purpose MIG Pliers

Mulit Purpose MIG Pliers For Cleaning Out Shroud Etc And Cutting Wire. Its cuts and draws out the mig wire, Tip removal Shroud removal Removal of spatter in and around the outside of the shroud With its insulated rubber grip for safe and reliable handling. This pair of professional mig pliers is spring loaded for easy use.

Price:£7.95£9.54

SWP Murex Lightweight Cutter Shank

SWP Murex Lightweight Cutter Shank

Designed to carry oxygen and fuel gas. It normally takes type 5 gas tips. 10mm o/d gas tips. D/H Shank

Price:£23.50£28.20

SWP Murex Lightweight Cutting Attachment

SWP Murex Lightweight Cutting Attachment

Lightweight welding cutting attachment for use with lightweight shank and DH cutting nozzles. D/H Cutting Attachment

Price:£26.50£31.80

SWP Murex Mixer

SWP Murex Mixer

Mixer for Saffire DH3 Lightweight Welding Blowpipe to take lightweight swaged nozzles. D/H Mixer

Price:£7.50£9.00

SWP N045 Torch Headnut

SWP N045 Torch Headnut

Headnut 18”– 90º Head Nut

Price:£2.50£3.00

SWP North Gamador Flip-Up 4-¼ x 2

SWP North Gamador Flip-Up 4-¼ x 2

Welding helmet made of Vulcanfibre. With fully adjustable headgear. Full face helmet 4¼ x 2 lens

Price:£26.95£32.34

SWP Nozzle Cleaners

SWP Nozzle Cleaners

Nozzle Cleaners 12 per box

Price:£0.70£0.84

SWP O Clip

SWP O Clip

O Clip O Clip

Price:£0.13£0.16

SWP O-Clip Pincers

SWP O-Clip Pincers

O-Clip Pincers O-Clip Pincers

Price:£10.50£12.60

SWP Orange Propane BBQ Hose

SWP Orange Propane BBQ Hose

Orange Propane Hose Perfect for BBQs Available in 6mm and 8mm sizes.

Price:£8.50£10.20

SWP Orange PVC Double Insulated Copper Welding Cable 50mm (320amps)

SWP Orange PVC Double Insulated Copper Welding Cable 50mm (320amps)

Double Insulated Copper Welding Cable with a 50mm Diameter Priced per Metre 50mm DI Cable - Orange (320amps)

Price:£6.10£7.32

SWP Oxygen/Acetylene Cylinder Trolley

SWP Oxygen/Acetylene Cylinder Trolley

Twin Oxygen/Acetylene Cylinder Trolley. 16” Pneumatic Tyres

Price:£103.50£124.20

SWP Oxygen/Acetylene Twin Gas Hose 10mm x 20 metre

SWP Oxygen/Acetylene Twin Gas Hose 10mm x 20 metre

Oxygen/Acetylene Twin Gas Hose 10mm x 20 metre

Price:£38.00£45.60

SWP Oxygen/Propane Cylinder Trolley

SWP Oxygen/Propane Cylinder Trolley

Ideal for the Home Workshop or for Professionals requiring portability of Gas Welding/Cutting Equipment. Robust Construction Solid wheels for easy movement Safety bar for securing cylinders Adjustable height safety bar

Price:£52.46£62.95

SWP Panorama Clear Goggles

SWP Panorama Clear Goggles

Panorama Clear Goggles Direct - EN 166 Anti-Mist

Price:£1.20£1.44

SWP Panorama Coloured Goggles

SWP Panorama Coloured Goggles

Panorama Coloured Goggles Indirect / Shade 5 Gas Weld Googles

Price:£2.40£2.88

SWP Panorama Large Clear Goggles

SWP Panorama Large Clear Goggles

Panorama Large Clear Grinding Goggle. Indirect Anti-mist.

Price:£3.95£4.74

SWP Portable Trolley

SWP Portable Trolley

Cylinder trolley suitable for the smallest oxy/acetylene cylinders on the market. Portable Trolley

Price:£37.95£45.54

SWP Propane Nozzle P-NM S

SWP Propane Nozzle P-NM S

Propane Nozzle P-NM S Available in a variety of sizes

Price:£3.50£4.20

SWP Protective Sleeves

SWP Protective Sleeves

Ideal for protection of the forearm. They are held in place by elasticated end collars. Red Leather Sleeves 18” - Kevlar Stitched

Price:£5.48£6.58

SWP Quiver 9kg - Dual Voltage 110/240v

SWP Quiver 9kg - Dual Voltage 110/240v

The heated electrode quiver is designed for use on installations with a 110 or 240v supply - ideal for site work The quiver will maintain an even temperature of 100?C Capacity: 9kgs

Price:£39.00£46.80

SWP Re-Settable Flashback Arrestor - Fuel Gas

SWP Re-Settable Flashback Arrestor - Fuel Gas

Re-Settable Flashback Arrestor Fuel Gas

Price:£45.00£54.00

SWP Re-Settable Flashback Arrestor - Oxygen

SWP Re-Settable Flashback Arrestor - Oxygen

Re-Settable Flashback Arresto Oxygen

Price:£45.00£54.00

SWP Red Kelvar Gauntlet

SWP Red Kelvar Gauntlet

Red Welder’s Gauntlet 14” Kevlar Stitched w/ Reinforced Palm

Price:£3.15£3.78

SWP Red Lined Gauntlet

SWP Red Lined Gauntlet

Red Lined Gauntlet 14" Lined

Price:£2.59£3.11

SWP Red PVC Glove

SWP Red PVC Glove

Red PVC Glove Knitted Wrist - Pierce Resistant

Price:£1.32£1.58

SWP Silicon Bronze Uncoated Brazing Rods

SWP Silicon Bronze Uncoated Brazing Rods

Ideal for general mild steel work and similar applications. Available Silicone Bronze 1.6mm x 2.5kg Silicone Bronze 2.4mm x 2.5kg Silicone Bronze 3.2mm x 2.5kg

Price:£34.50£41.40

SWP Silver Solder Flux Powder 500g

SWP Silver Solder Flux Powder 500g

Removal of Flux Residues FERROUS METALS Flux residues can be removed with a hot water wash and mechanical cleaning with a wire brush. On certain applications- due to the workpiece, size or shape, it may be necessary to use a weak solution (5%) of hydrochloric acid. COPPER ALLOYS Use 10-15% sulphuric acid solution ALUMINIUM ALLOYS Immerse work piece in a 10-20% caustic soda solution for aproximately one minute. PLEASE NOTE When using chemicals ensure that all parts are thoroughly washed after treatment.

Price:£22.95£27.54

SWP Single Oxygen/Acetylene Cylinder Trolley

SWP Single Oxygen/Acetylene Cylinder Trolley

Single Oxygen/Acetylene Cylinder Trolley Single Oxygen/Acetylene Cylinder Trolley

Price:£39.95£47.94

SWP Single Phase Compact Mig 170c

SWP Single Phase Compact Mig 170c

Suitable for light automotive and light industrial applications,the MIG 170C is a lightweight, easy to use single phase MIG welding machine. Features: Copper transformer and choke Forced air cooling Braked wire spool holder Accepts 0.45 and 5kg wire reels Stable arc Soft arc technology Euro fitting as standard Supplied with torch & argon reg. Flux cored wire compatible Mains Connection 1-230V Fuse 16amp Permissible load at: 100% duty cycle 65A 60% duty cycle 80A 35% duty cycle 125A Welding Current) 30-170A Voltage Steps 6 Dimensions L x W x H 430 x 250 x 300mm Weight 25kg Welding Wire Dimensions 0.6-0.8mm

Price:£731.25£877.50

SWP Single Phase Compact Mig 220

SWP Single Phase Compact Mig 220

The MIG 220 is a versatile and robust machine, ideally suited to automotive and light industrial applications. For example, on maximum power and maximum duty cycle the MIG 220 consumes only 5kVA, which means it requires only a 16 A fuse and can be used on site from a 6kVA generator. It has a full size cabinet (which can accept a full height gas cylinder) and large diameter wheels means it can be moved from job to job with little risk of toppling. Also, the variable speed 2-roll wire feed is achieved through our renowned all-geared drive system, minimising the risk of wire slip and so making your welds uniform. The unit is also suitable for use with spool or push-pull guns, which allows you to increase your work radius up to 8 metres. Copper transformer and choke Forced air fan cooling Overload warning indicator Heavy duty front and rear wheels All geared metal cast feed system Double support straps for gas cylinder Infinitely variable wire speed Spot weld timer Soft arc technology Torch and regulator included Mains Connection 1-230V Fuse 16amp Permissible load at: 60% duty cycle 110A 40% duty cycle 150A 20% duty cycle 200A Welding Current) 25-220A Voltage Steps 12 Dimensions L x W x H 780 x 442 x 735mm Weight 51kg Welding Wire Dimensions 0.6-0.8mm

Price:£715.00£858.00

SWP Single Phase Compact Mig 280 4 Roll Compact

SWP Single Phase Compact Mig 280 4 Roll Compact

Special offer Buy this Mig 280 4 machine and get a SWP 3037 Black Variable Shade Helmet and a SWP Red Lined Gauntlet ABSOLUTELY FREE!! Robust motor and gearbox Digital amp and voltmeter Low spatter transformer design Spot and stitch timer Slope down for crater fill Fan cooled for efficiency Will support full size gas cylinder Torch and regulator included Mains Connection 1-230V, 50/60Hz Fuse 32amp Output current 200amp No Load Voltage 40V (Max) Permissible load at: 100% duty cycle 130A 40% duty cycle 200A Welding Current) 40-280A KVA 7.6 Dimensions L x W x H 765 x 345 x 730m Weight 60kg Welding Voltage Range 16v-24v Welding Wire Range 0.6-1.2m Welding Wire Dia 200 ~ 300mm Welding Current 40-280A Protection IP21 Insulation Class F

Price:£625.00£750.00

SWP Single Phase Mig 271 4-Roll Compact

SWP Single Phase Mig 271 4-Roll Compact

The MIG 271 4-Roll Compact is a versatile and robust single phase machine, ideally suited to light, medium and heavy fabrication. For example, on maximum power and maximum duty cycle the MIG 271 consumes only 8.8kVA, which means it requires only a 25A fuse and can be used in the field from a 10kVA generator. The full size cabinet can accept a full height gas cylinder and the large diameter wheels means it can be moved from job to job with little risk of toppling. Also, the variable speed four roll wire feed is achieved through our renowned all-geared drive system, minimising the risk of wire slip and so making your welds uniform. The unit is also suitable for use with spool or push-pull guns, which allows you to increase your work radius up to 8 metres. It has the ability to take larger diameter wire than lower power units in the range meaning they can weld thicker plate and their switch settings allow for fine tuning the output power. Copper transformer and choke Forced air fan cooling Overload warning indicator Heavy duty front and rear wheels All geared 4-roll feed system Double support straps for gas cylinder Infinitely variable wire speed Spot weld timer Latch facility Burnback control Gas purge Soft arc technology Torch and regulator included Mains Connection 1-230V Fuse 25amp Permissible load at: 100% duty cycle 140A 60% duty cycle 170A 20% duty cycle 270A Welding Current) 40-270A Voltage Steps 12 Dimensions L x W x H 780 x 442 x 735mm Weight 70kg Welding Wire Dimensions 0.6-1.2mm

Price:£890.00£1,068.00

SWP Single Phase Mig 311 4-Roll Compact

SWP Single Phase Mig 311 4-Roll Compact

The MIG 311 4-Roll Compact is a versatile and robust single phase machine, ideally suited to light, medium and heavy fabrication. For example, on maximum power and maximum duty cycle the MIG 311 consumes only 12kVA, which means it requires only a 35A fuse and can be used in the field from a 15kVA generator. The full size cabinet can accept a full height gas cylinder and the large diameter wheels means it can be moved from job to job with little risk of toppling. Also, the variable speed four roll wire feed is achieved through our renowned all-geared drive system, minimising the risk of wire slip and so making your welds uniform. The units are also suitable for use with spool or push-pull guns, which allows you to increase your work radius up to 8 metres. The ability to take larger diameter wire than lower power units in the range meaning they can weld thicker plate and their switch settings allow for fine tuning the output power. Copper transformer and choke Forced air fan cooling Overload warning indicator Heavy duty front and rear wheels All geared 4-roll feed system Double support straps for gas cylinder Infinitely variable wire speed Spot weld timer Latch facility Burnback control Gas purge Soft arc technology Torch and regulator included Mains Connection 1-230V Fuse 35amp Permissible load at: 100% duty cycle 180A 60% duty cycle 240A 20% duty cycle 330A Welding Current) 30-340A Voltage Steps 16 Dimensions L x W x H 800 x 492 x 840mm Weight 100kg Welding Wire Dimensions 0.6-1.2mm

Price:£1,160.00£1,392.00

SWP Single Phase Separate Wire Feeder Mig 271S + WF350/4

SWP Single Phase Separate Wire Feeder Mig 271S + WF350/4

The MIG 271S + WF350/4 is a versatile and robust machine with a separate wire feed unit. It is ideally suited to automotive and light to medium industrial applications in the workshop or on site. On maximum power and maximum duty cycle, the MIG 271S consumes only 8.8kVA, which means it requires only a 25A fuse and can be used in the field from a 10kVA generator. The full size cabinet can accept a full height gas cylinder and the large diameter wheels means it can be moved from job to job with little risk of toppling. Also, the separate 4-roll wire feed unit (the WF350/4) features our renowned all-geared drive system, minimising the risk of wire slip and so making your welds uniform. Further, with the 5 metre interconnection and 4 metre welding torch, this gives you a working radius of up to 9 metres. Both machines have the ability to take larger diameter wire than lower power units in the range meaning they can weld thicker plate and their switch settings allow for fine tuning the output power. PLEASE NOTE: Mainland UK delivery only Copper transformer and choke Forced air fan cooling Overload warning indicator Heavy duty front and rear wheels All geared 4-roll feed system Double support straps for gas cylinder Infinitely variable wire speed Spot weld timer Latch facility Burnback control Gas purge Inch button Soft arc technology Torch and regulator included WF350/4 Power Max 60W Input Voltage 42V AC Wire Speed 1-18 m/min Wire Diameter 0.6 - 1.2 mm Dimensions L x W x H 570 x 225 x 420mm Weight 14kg Mig 271S Mains Connection 1-230V Fuse 25amp Permissible load at: 100% duty cycle 140A 60% duty cycle 170A 20% duty cycle 270A Welding Current) 40-270A Voltage Steps 12 Dimensions L x W x H 730 x 300 x 750mm Weight 70kg OCV 17.6-32V

Price:£1,453.72£1,744.46

SWP Single Phase Separate Wire Feeder Mig 311S + WF350/4

SWP Single Phase Separate Wire Feeder Mig 311S + WF350/4

The MIG 311S + WF350/4 is a versatile and robust single phase machine with a separate wire feed unit. It is ideally suited to automotive and light to medium industrial applications in the workshop or on site. On maximum power and maximum duty cycle, the MIG 311S consumes only 12kVA, which means it requires only a 35A fuse and can be used in the field from a 15kVA generator. Its full size cabinets can accept a full height gas cylinder and the large diameter wheels means it can be moved from job to job with little risk of toppling. Also, its separate 4-roll wire feed unit (the WF350/4) features our renowned all-geared drive system, minimising the risk of wire slip and so making your welds uniform. Further, with the 5 metre interconnection and 4 metre welding torch, this gives you a working radius of up to 9 metres. The MIG 311S + WF350/4’s ability to take larger diameter wire than lower power units in the range means it can weld thicker plate and its 16 switch settings allow for fine tuning the output power. PLEASE NOTE: Mainland UK delivery only Copper transformer and choke Forced air fan cooling Overload warning indicator Heavy duty front and rear wheels All geared 4-roll feed system Double support straps for gas cylinder Infinitely variable wire speed Spot weld timer Latch facility Burnback control Gas purge Inch button Soft arc technology Torch and regulator included WF350/4 Power Max 60W Input Voltage 42V AC Wire Speed 1-18 m/min Wire Diameter 0.6 - 1.2 mm Dimensions L x W x H 570 x 225 x 420mm Weight 14kg Mig 311S Mains Connection 1-230V Fuse 35amp Permissible load at: 100% duty cycle 160A 60% duty cycle 210A 20% duty cycle 330A Welding Current) 30-340A Voltage Steps 16 Dimensions L x W x H 800 x 492 x 840mm Weight 100kg OCV 15.8-37.9V

Price:£1,295.00£1,554.00

SWP Single Phase Separate Wire Feeder Mig 411S + WF500/4

SWP Single Phase Separate Wire Feeder Mig 411S + WF500/4

The MIG 411S + WF500/4 is a versatile and robust single phase machine, ideally suited to medium to heavy fabrication. On maximum power and maximum duty cycle it consumes only 13.6kVA, which means it requires only a 50A fuse and can be used in the field from a 15kVA generator. Moreover, at 100% duty cycle, the output power is 300A, making this one of the highest power single phase machines on the market. Its full size cabinet can accept a full height gas cylinder and its large diameter wheels means it can be moved from job to job with little risk of toppling. Also, with its four lifting eye bolts, the unit is easy to transport by crane or other lifting equipment. Its separate 4-roll wire feed unit (the WF500/4) features our renowned all-geared drive system, minimising the risk of wire slip and so making your welds uniform. Further, with its 5 metre interconnection and 4 metre welding torch, this gives you a working radius of 9 metres. The unit is also suitable for use with spool or push-pull guns, which allows you to increase your work radius up to 13 metres. The WF5004’s ability to take larger diameter wire (2.4 mm) means it can handle up to 500A, allowing you to weld some materials greater than 25 mm. In addition, the MIG 411S’s 16 switch settings and its digital Amp and Volt meter allows for fine tuning the output power. PLEASE NOTE: Mainland UK delivery only Lifting eye bolts Copper transformer and choke Forced air fan cooling Overload warning indicator Heavy duty front and rear wheels All geared 4-roll feed system Cylinder support straps for gas cylinder Infinitely variable wire speed Spot weld timer Latch facility Burnback control Gas purge Inch button LED display 5m interconnection Soft arc technology Torch and regulator included WF500/4 Power Max 110W Input Voltage 42V AC Wire Speed 1-120 m/min Wire Diameter 0.8 - 2.4 mm Dimensions L x W x H 570 x 215 x 420mm Weight 19kg Mig 411S Mains Connection 1-230V Fuse 50amp Permissible load at: 100% duty cycle 300A 60% duty cycle 340A 20% duty cycle 400A Welding Current) 30-340A Voltage Steps 16 Dimensions L x W x H 920 x 500 x 780mm Weight 170kg OCV 17-44V

Price:£2,015.00£2,418.00

SWP Single Phase Separate Wire Feeder Mig 450S + WF500/4

SWP Single Phase Separate Wire Feeder Mig 450S + WF500/4

The MIG 450S + WF500/4 is one of our flagship products and offers second-to-none levels of performance for heavy fabrication work. It is a robust three phase machine and only requires a 25A fuse. Its full size cabinet can accept a full height gas cylinder and its large diameter wheels means it can be moved from job to job with little risk of toppling. The WF5004 features our renowned all-geared drive system, thus minimising the risk of wire slip and making your welds uniform. Further, with its 5 metre interconnections and 4 metre welding torch, this gives you a working radius of 9 metres. The unit is also suitable for use with spool or push-pull guns, which allows you to increase your work radius up to 13 metres. The WF500/4’s ability to take larger diameter wire (2.4mm) means it can handle up to 500A, allowing you to weld most materials greater than 25mm. In addition, the MIG 450S’s 30 switch settings and its digital Amp and Volt meter allows for fine-tuning of the output power. PLEASE NOTE: Mainland UK delivery only Lifting Eye Bolts Copper transformer and choke Forced air fan cooling Overload warning indicator Heavy duty front and rear wheels All geared cast feed systems Support strap for gas cylinder Infinitely variable wire speed Spot weld timer Latch facility Burnback control Gas purge Integral water cooling with pressure switch – optional extra Inch button LED display Soft arc technology Torch and regulator included WF500/4 Power Max 110W Input Voltage 42V AC Wire Speed 1-120 m/min Wire Diameter 0.8 - 2.4 mm Dimensions L x W x H 570 x 215 x 420mm Weight 19kg Mig 450S Mains Connection 3~415V Fuse 25amp Permissible load at: 100% duty cycle 290A 60% duty cycle 355A 35% duty cycle 450A Welding Current) 50-450A Voltage Steps 30 Dimensions L x W x H 920 x 500 x 780mm Weight 168kg Wire Dimensions 0.6- 1.6 mm

Price:£2,115.00£2,538.00

SWP Single Propane Cylinder Trolley

SWP Single Propane Cylinder Trolley

Single Propane Cylinder Trolley Single Propane Cylinder Trolley

Price:£41.95£50.34

SWP Solid Mild Steel Mig Wire ER70-S6 Mini Spool

SWP Solid Mild Steel Mig Wire ER70-S6  Mini Spool

A18 wire is Lloyds Approved, precision layer wound and supplied on 300mm 15kg plastic reels. The outer box is branded “Super 6” and marked with the relevant Health and Safety data.< The wire specification is EN440 AWS A5.18: ER 70 S-6. Available in 0.6mm x 5kg 0.8mm x 5kg 1.0mm x 5kg

Price:£12.95£15.54

SWP Solid Mild Steel Mig Wire ER70-S6 Mini Spool 0.7kg

SWP Solid Mild Steel Mig Wire ER70-S6  Mini Spool 0.7kg

A18 wire is Lloyds Approved, precision layer wound and supplied on 300mm 15kg plastic reels. The outer box is branded “Super 6” and marked with the relevant Health and Safety data. The wire specification is EN440 AWS A5.18: ER 70 S-6. Available in 0.6mm x 0.7kg 0.8mm x 0.7kg 0.6mm x 5kg 0.8mm x 5kg 1.0mm x 5kg

Price:£4.50£5.40
Price:£31.50£37.80
Price:£39.50£47.40
Price:£30.00£36.00
Price:£79.50£95.40

SWP Speedmaster Outer Lens Pk10

SWP Speedmaster Outer Lens Pk10

Polycarbonate Lens 120 x 100mm QTY 10

Price:£11.70£14.04

SWP Spring Handled Chipping Hammer

SWP Spring Handled Chipping Hammer

Strong, solid construction with spring handle to provide a good grip and reduce resonance. Head includes a chisel end and point.

Price:£1.35£1.62

SWP Stainless Steel 316Lsi Solid Mig Wire Mini Spool

SWP Stainless Steel 316Lsi Solid Mig Wire Mini Spool

316LSI is similar to 316L but with an increased silicon content that considerably improves the weld producing a smoother and consistent bead. This wire is ideal for jobs requiring a good cosmetic appearance. Available in 0.6mm x 0.7kg 0.8mm x 0.7kg

Price:£13.50£16.20

SWP Stainless Steel Wire Brush

SWP Stainless Steel Wire Brush

Stainless Steel Wire Brush Stainless Steel Wire Brush

Price:£1.15£1.38

SWP Straight Line Cutter c/w 1.8 meter Track & Burning Torch

SWP Straight Line Cutter c/w 1.8 meter Track & Burning Torch

Straight Line Cutter 110 volt Cutting Thickness 5-50mm Cutting Speed 150-800mm Speed Control by single cone system Motor Speed 1500 rpm Power Supply 110 volt AC Weight 9.5Kg Cutting Nozzles ANM PNM

Price:£475.00£570.00

SWP Strong Hand 90° Dual Switch Magnet

SWP Strong Hand 90° Dual Switch Magnet

The MS2-80 welding magnet has two patented ON/OFF switches making positioning easier and safer. This is a heavy duty magnet with two independent switches. For professional jobs that demand strong hold down forces. Strong holding force Two ON/OFF switches Percision machined flat and V-Groove surfaces securely hold flat, round and square workpieces and metal plates

Price:£62.15£74.58

SWP Strong Hand Ratchet Action High Pressure Clamp

SWP Strong Hand Ratchet Action High Pressure Clamp

Specially designed ratchet action mechanism ensures rapid clamping and vibration and torsion resistance. Rapid release button Pivoting 1½ contact plate Spring action lever stop Removable clamp arm UG85RMUG105JRMUG125RM Capacity216mm216mm318mm Throat120mm120mm120mm Rail Size25 x 12mm25 x 12mm25 x 12mm Clamping Pressure550kg550kg550kg Tapped Hole10M10M1.8kg Weight1.8kg1.8kg1.8kg

Price:£59.75£71.70

SWP Strong Hand Tools Shark Clamp

SWP Strong Hand Tools Shark Clamp

These Strong Hand Tools Shark clamps feature pivoting, hinged arms to provide for a wide opening, while the inside serration hold work pieces securely. Curved clamp arm. Scissor action with floating grip pads will hold odd shaped parts accurately. Easy and precise one hand clamping. Clamp parts while keeping a parallel support underneath. Two mounting slots on clamp jaws allow mounting of the clamp on the bottom of the bench. The clamp can be swung away when not in use. Screw is perpendicular to the clamp jaws for space saving clamping. Inside grip teeth will hold larger pipes and cylinders. Use as a filter wrench or mount attachments, such as lighting fixtures, to pipes or I-beams. Join two clamps together by using the mounting plate. Swivel pads tolerate uneven thickness.

Price:£9.27£11.12

SWP Strong Hand Tools Torpedo Magnet Level

SWP Strong Hand Tools Torpedo Magnet Level

The Strong Hand Tools torpedo magnet level attaches securely to any metal structure, leaving your hands free to work. 3 Vial design for accurate 0°, 45°, & 90° leveling V-Groove on one side for pipe and conduit work Robust, solid aluminum body Length: 7" Height: 1-14" Width: 1"

Price:£11.82£14.18

SWP Super Six 5356 Aluminium

SWP Super Six 5356 Aluminium

General purpose aluminium containg 5&#37; magnesium, giving excellent corrosion resistance and high joint strength. Used in ship building, offshore, power generation, and railway industries, repair and maintenance.

Price:£13.75£16.50

SWP Super Six Brand Mild Steel Electrodes 2.5kg

SWP Super Six Brand Mild Steel Electrodes 2.5kg

General purpose electrode for welding mild structural steels Weight: 2.5Kg

Price:£3.95£4.74

SWP Super Six Flux Cored 0.8mm x 4.5kg

SWP Super Six Flux Cored 0.8mm x 4.5kg

A cored wire that builds a slag protection and therefore needs no gas to weld a large variety of mild steels. Diameter 0.8 mm, for welding mild steels. Change polarity for best result.

Price:£37.46£44.95

SWP Superflow 2 Stage 2 Gauge Argon Regulator

SWP Superflow 2 Stage 2 Gauge Argon Regulator

SWP Superflow 2 Stage 2 Gauge Argon Regulator The first stage diaphragm regulates the cylinder contents to a constant pressure into the second stage of the regulator where the user has control over the output pressure. This pressure is maintained throughout the use of the cylinder contents without the need to readjust the regulator, - as would be the case with a single stage regulator.

Price:£58.00£69.60

SWP Superflow 2 Stage 2 Gauge Oxygen Regulator

SWP Superflow 2 Stage 2 Gauge Oxygen Regulator

SWP Superflow 2 Stage 2 Gauge Oxygen Regulator The first stage diaphragm regulates the cylinder contents to a constant pressure into the second stage of the regulator where the user has control over the output pressure. This pressure is maintained throughout the use of the cylinder contents without the need to readjust the regulator, - as would be the case with a single stage regulator.

Price:£58.00£69.60

SWP Superflow Single Stage 2 Gauge Acetylene Regulator

SWP Superflow Single Stage 2 Gauge Acetylene Regulator

SWP Superflow Single Stage 2 Gauge Acetylene Regulator The two gauge regulators show both the cylinder contents and the regulated outlet pressure.

Price:£25.50£30.60

SWP Superflow Single Stage 2 Gauge Argon Regulator

SWP Superflow Single Stage 2 Gauge Argon Regulator

SWP Superflow Single Stage 2 Gauge Argon Regulator The two gauge regulators show both the cylinder contents and the regulated outlet pressure.

Price:£25.50£30.60

SWP Superflow Stage 2 Guage Oxygen Regulator

SWP Superflow Stage 2 Guage Oxygen Regulator

SWP Superflow Single Stage 2 Guage Oxygen Regulator The two gauge regulators show both the cylinder contents and the regulated outlet pressure.

Price:£25.50£30.60

SWP Tail Nut

SWP Tail Nut

Tail Nut Tail Nut

Price:£0.45£0.54

SWP Three Phase Compact Mig 300

SWP Three Phase Compact Mig 300

The MIG 300 is a robust and power-efficient three phase machine for spot and stitch welding. It is ideally suited to medium to heavy fabrication and requires only a 16A fuse. Its full size cabinet can accept a full height gas cylinder and its large diameter wheels means it can be moved from job to job with little risk of toppling. PLEASE NOTE: Mainland UK delivery only Copper transformer and choke Forced air fan cooling Overload warning indicator Heavy duty front and rear wheels All geared 4-roll feed system Cylinder support straps for gas cylinder Infinitely variable wire speed Spot weld timer Burnback control Stitch Welding Soft arc technology Digital volt and amp meter Torch and regulator included

Price:£1,035.00£1,242.00

SWP TIG 180P – Dual Voltage Inverter Welder

SWP TIG 180P – Dual Voltage Inverter Welder

A great value Dual Voltage Tig Welder Rugged Internal Support Frame Generator Friendly Choice of Pulse Frequency HF Ignition 1 Year Warranty Fuse Rating 16 amp Generator Friendly + / – 15&#37; Input Power Voltage 110/220V (Single Phase) Rate Input Power Capacity 3.9 KVA Input Voltage Frequency 50 / 60 Hz Output Current Range MMA 10 – 180 amps TIG 5 – 180 amps Duty Cycle (25°C) 110V 140 amps @ 60&#37; 240V 180 amps @ 60&#37; Arc – Starting HF Weight 8.8kg Overall Dimensions 371 x 155 x 295mm Protection Class Ip23 Pulse Frequency MH 50 – 200 Hz LH 0.5 – 2 Hz Welding Thickness with DC 0.3 – 6 mm Slope In 2-10 seconds variable Slope Out 0-5 seconds variable HF Plug Supplied Yes Accessories 35-50 Dinse Plug and Socket

Price:£445.00£534.00

SWP TIG 200P Single Phase – AC/DC

SWP TIG 200P Single Phase – AC/DC

Single phase TIG machine Rugged internal support frame Generator friendly Digital meter Choice of pulse frequency Welds all forms of steels – including aluminium HF ignition Foot switch option Fuse Rating : 15A I1 Max : 21A Generator Friendly : +/- 15&#37; Input Power Voltage : AC 230 (Single Phase) Rate Input Power Capacity : 4.5kVA Input Voltage Frequency : 50 / 60 Hz Output Current Range : 5-200Amp (DC Tig) 17-200Amp (AC Tig) Duty Cycle (25°C) : 185 Amps @ 60&#37; DC Tig 200 Amps @ 60&#37; AC Tig Arc Starting : HF Weight : 20kg Dimensions : 493mm x 330mm x 320mm Protection Class : IP23 Welding Thickness (DC) : 0.5-8mm Slope In : 0-2 Seconds Variable Slope Out : 0-10 Seconds Variable Clean Width : 20-80&#37;

Price:£950.00£1,140.00

SWP Triple Flint Gas Spark Lighter

SWP Triple Flint Gas Spark Lighter

Spark Lighter with triple flint on a triangular pad. As one flint is worn out, the pad can be turned, to bring another flint into use.

Price:£0.80£0.96

SWP Triple Flints

SWP Triple Flints

Triple Flints for gas spark lighter Triple Flints

Price:£0.35£0.42

SWP Triple Spark Lighter

SWP Triple Spark Lighter

Triple Spark Lighter Comes with 4 flints

Price:£3.75£4.50

SWP Twin Gas Cylinder Trolley

SWP Twin Gas Cylinder Trolley

Twin Gas Cylinder Trolley With solid wheel For oxygen / acetylene

Price:£39.95£47.94

SWP Type 4 Cutting Attachment

SWP Type 4 Cutting Attachment

Type 4 Cutting Attachment

Price:£29.50£35.40

SWP Type 4 Shank

SWP Type 4 Shank

SWP Type 4 Shank Type 4 Shank

Price:£27.50£33.00

SWP Type 5 Heavy Duty Cutting Attachment

SWP Type 5 Heavy Duty Cutting Attachment

Heavy Duty Cutting Attachment Heavy Duty Cutting Attachment

Price:£35.00£42.00

SWP Type 5 Heavy Duty Cutting Shank

SWP Type 5 Heavy Duty Cutting Shank

Heavy Duty Cutting Shank Type 5 Heavy Duty Cutting Shank

Price:£35.00£42.00

SWP Type 5 Propane Mixer

SWP Type 5 Propane Mixer

Propane Mixer Type 5 Propane Mixer

Price:£8.50£10.20

SWP Type 5 Swaged Welding Nozzle

SWP Type 5 Swaged Welding Nozzle

Type 5 Swaged Welding Nozzle High performance welding nozzles Guaranteed quality, performance & safety

Price:£2.00£2.40

SWP Type 5 Welding Mixer

SWP Type 5 Welding Mixer

Weld Mixer Type 5 Weld Mixer

Price:£5.50£6.60

SWP Variable Helmet Inner Lens 103 x 47mm Pk 10

SWP Variable Helmet Inner Lens 103 x 47mm Pk 10

Variable Helmet Inner Lens For 3040, 3041, 3045, 3046 103 x 47mm Pk 10

Price:£11.72£14.06

SWP VVC 3 Nozzle

SWP VVC 3 Nozzle

VVC 3 Nozzle 150 - 175mm plate

Price:£9.45£11.34
Price:£3.56£4.27

SWP Welding and Brazing Rod 2.4mm DIY Mini Rod Pack (8)

SWP Welding and Brazing Rod 2.4mm DIY Mini Rod Pack (8)

Pack of 8 mini rods C.C.M.S. 2.4mm 0.2kg

Price:£2.50£3.00

SWP Wooden Handle Chipping Hammer

SWP Wooden Handle Chipping Hammer

The original and most popular model chipping hammer. With a solid wood handle and a double-ended chipping head

Price:£2.45£2.94

SWP Zeus Safety Spectacles

SWP Zeus Safety Spectacles

Safety Spectacles Clear Anti-Mist Lens Blue Adjustable Arms Cord

Price:£5.66£6.79

Thoriated Tungstens

Thoriated Tungstens

Thoriated Tungstens They are the most commonly used electrodes today and are preferred for their longevity and ease of use. Thorium increases the electron emission qualities of the electrode, which improves arc starts and allows for a higher current carrying capacity. This electrode operates far below its melting temperature, which results in a considerably lower rate of consumption and eliminates arc wandering for greater stability. It also features a lower level of weld contamination than other electrodes. Sold individually

Price:£0.65£0.78

Weldmaster, Speedmaster and Xelux Inner Lens pk10

Weldmaster, Speedmaster and Xelux Inner Lens pk10

Polycarbonate Lens 107 x 50mm Qty 10

Price:£11.74£14.09

Zirconiated Tungsten

Zirconiated Tungsten

Zirconiated Tungsten Zirconiated tungsten electrodes (AWS classification EWZr-1) contain a minimum of 99.10&#37; tungsten and .15 to .40&#37; zirconium. A Zirconiated tungsten electrode produces an extremely stable arc and resists tungsten spitting. It is ideal for AC welding as it retains a balled tip and has a high resistance to contamination. Its current carrying capability is equal to or greater than thoriated tungsten. Under no circumstances is zirconiated recommended for DC welding. Sold individually

Price:£0.65£0.78