Panasonic Products

Below are our Panasonic products. You can click on each product to view a full description and specification.

Sorting products...Sorting products...

Panasonic 18V SDS Dual Voltage Hammer Drill

Panasonic 18V SDS Dual Voltage Hammer Drill

Compact and lightweight, perfect for light masonry drilling such as drilling plugs and frame fixings. It is compatible with both 18v and 14.4v li-ion batteries, allowing you to tailor the tool to the task at hand. Designed for fast hammer drilling of anchor holes in masonry and concrete, it easily converts to standard rotary drilling for wood and steel, also screwdriving using the 5 stage torque clutch. This drill comes with: 1 x 14.4V 4.2Ah battery 1 x 18V 4.2Ah battery 1 x 60 minute battery charger 1 x carry case 13mm Keyless Chuck Variable Speed Reverse Action 0-4750 BPM Maximum Drilling Diameter (Concrete) - 16.5mm Maximum Drilling Diameter (Steel) - 13mm Maximum Drilling Diameter (Wood) - 18mm Speed at no load (RPM) - 0-1000 (14.4v); 0-1250 (18v) Blows rate per minute - 3800 (14.4v); 4750 (18v) 1 x 14.4V & 1 x 18V 4.2Ah Li-ion Batteries Weight: 2.6kg

Price:£329.95£395.94

Panasonic EY6432GQKW Cordless Drill Driver 15.6V

Panasonic EY6432GQKW Cordless Drill Driver 15.6V

The Panasonic EY6432GQKW Ni-MH 15.6-volt 2.8Ah cordless ½” drill and driver kit packs high power and control into a small package that’s easy to use for general construction, plumbing, electrical or finish carpentry work. At 4.5 lbs. including battery, and only 8-3/16” long x 9” tall x 2-9/32” wide, the tool produces up to 390 in. lbs. of power for demanding drilling jobs, yet its small size makes it a good tool for work in cramped quarters. It has a variable speed control and a reversible two-speed transmission that delivers 65-450 rpm on low speed and 200-1,450 rpm in high speed. The 18-stage clutch delivers 9 to 61 in. lbs. stepped up in 3.0 in. lbs. increments. Maximum torque is delivered in drill-only mode. The ergonomic design fits well in the user’s hand and helps maintain a neutral wrist position in overhead, horizontal or floor drilling/driving operations. The electric brake stops the bit from turning instantly when the trigger is released for optimal drilling and driving control. Using the Panasonic EY0110B charger, the battery reaches full charge in 45 minutes. The kit comes with two 15.6-volt 2.8Ah batteries. High Capacity 2.8Ah Ni-MH Battery High Power - 31.9Nm New Ergonomic Design Variable Speed Control / Reversible 18 Stage Clutch plus Drill Position 13mm Heavy Duty Keyless Chuck 2 Speed Gearbox Comes with 2 x 2.8Ah batteries Voltage15.6V Battery Type NI-MH Ah Rating2.8 Clutch Stages18 + Drill Instant Toque (Nm)44.1 Stalling Torque (Nm)31.9 Drill Speed Low (RPM)65-450 Drill Speed High (RPM) 200-1450 Chuck Size (mm)13 Weight (Kg)2.2 Dimensions (LxHxW) 208x229x58 Charge Time (Min) 55

Price:£149.00£178.80

Panasonic EY7443 AUTO 14.4V Drill Driver

Panasonic EY7443 AUTO 14.4V Drill Driver

With it's built in automatic gear selection feature, the EY7443 changes to suit the application automatically - saving you time and power Voltage: 14.4V Charging time (usable/full charge): 50/60min No load speeds: 60-400/160-1400rpm Max. torque: 28/41,5Nm Clutch torque: 0-5 - 4.4Nm Clutch stagees: 18 + drill Max. drilling diameter (wood/metal): 35 / 13mm Max. holesaw size (in metal): 33mm

Price:£249.95£299.94

Panasonic EY74A1 Cordless Drill & Driver 18V

Panasonic EY74A1 Cordless Drill & Driver 18V

This drill comes with 2 x 4.2Ah batteries Construction and maintenance professionals often switch between driving and drilling tasks throughout the day. The New Panasonic Dual Voltage Technology 4.2Ah EY74A1X (EY74A1X tool only) ½" drill and driver kit is built to take on both jobs with versatility and power that general construction, plumbing, finish carpentry and electrical installation workers need to do the job efficiently and professionally. 4.2Ah High Capacity Battery 18V Tough IP56 Rated - Water and Dust Resistance

Price:£224.95£269.94

Panasonic EY7880 LZ2C SDS+ Rotary Hammer Drill 28.8v

Panasonic EY7880 LZ2C SDS+ Rotary Hammer Drill 28.8v

The Panasonic EY7880 LZ2C SDS+ Rotary Hammer Drill is a heavy duty drill that uses the latest Panasonic 'Tough Tool IP' technology. Two High Capacity 3.1Ah Li-Ion Batteries for long-lasting working Compact tool with low weight and "Revolithium" Technology High speed concrete drilling by electropneumatic hammer mechanism Hard and soft hammering mode to ensure best results in different materials Slow and high speed drilling mode for different materials Dust proof switch for highest reliability Voltage28.8 volt Battery TypeLithium-Ion Rating 3.0 Ah No Load Speed (low) 0 - 500 rpm No Load Speed (high)0 - 920 rpm Drilling Capacity Masonry20mm Drilling Capacity Steel13mm Drilling Capacity Wood 27mm Weight (inc battery)3.8Kg Dimensions (Lx H x W)316mm x 206mm x 74mm Charge Time Full 70 minutes Charge Time Quick 55 minutes Impact Rate (low) 0 - 2,800 ipm Impact Rate(high) 0 - 4,500 ipm

Price:£349.00£418.80

Panasonic EYC200 Drill Driver + Impact Kit

Panasonic EYC200 Drill Driver + Impact Kit

The EYC200 twinpack from Panasonic comes with EY74A1 cordless drill driver and an EY75A1 cordless impact driver. Also included are 2 x 4.2Ah batteries and charger. Light weight tool at 1.95kg including the battery High performance and powerful tool with max. torque of 42Nm 18-stage clutch plus drill position 13mm high-capacity keyless drill chuck Electric speed control for increased usability Electric brake, Reversible Compact and lightweight body LED light to illuminate the work piece Voltage18V Battery capacity 4.2Ah (Li-ion) Charging time (usable / full)55 / 70min Speed at no load (low / high) in rpm80 - 600 / 220 - 1,750 Max. torque (stalling / instant torque)32 / 42Nm Clutch torque0.5 - 4.4Nm Clutch stages18 + drill position Max. drilling diameter (in wood / in metal)35 / 13mm Max. holesaw size (in wood)50mm Weight1.95kg Light weight tool at only1.65kg including the battery 1/4" hex drive for quick and secure bit changes 3 speed/clutch stages (low / middle / high) Brushless motor and hybrid switch for increased performance and tool life Electric speed control, Electric brake, Reversible Belt hook for user convenience LED light to illuminate the work piece Voltage18V Battery capacity4.2Ah (Li-ion) Charging time (usable / full)55 / 70min Max. torque (low / middle / high)26 / 130 / 155Nm Speed at no load (low / middle / high) in rpm0-1,000 / 0-1,400 / 0-2,500 Impact (low / middle / high) in rpm 0-2,000 / 0-2,800 / 0-3,000 Weight 1.65kg

Price:£316.62£379.94