KeeSafety Products

Below are our KeeSafety products. You can click on each product to view a full description and specification.

Sorting products...Sorting products...

Kee Klamp 10-6 Single Socket Tee 33.7 O/D

Kee Klamp 10-6 Single Socket Tee 33.7 O/D

Designed to give a 90° butt joint between two tubes. Frequently used for the joint between end uprights and the middle rail on safety railing where the site is straight and level. Also for base ties on racking. This fitting cannot be used where the pipe through sleeve 'A' is required to be joined within the fitting.

Price:£5.04£6.05

Kee Klamp 10-7 Single Socket Tee 42.4 O/D

Kee Klamp 10-7  Single Socket Tee 42.4 O/D

Designed to give a 90° butt joint between two tubes. Frequently used for the joint between end uprights and the middle rail on safety railing where the site is straight and level. Also for base ties on racking. This fitting cannot be used where the pipe through sleeve 'A' is required to be joined within the fitting.

Price:£6.32£7.58

Kee Klamp 10-8 Single Socket Tee 48.3 O/D

Kee Klamp 10-8 Single Socket Tee 48.3 O/D

Designed to give a 90° butt joint between two tubes. Frequently used for the joint between end uprights and the middle rail on safety railing where the site is straight and level. Also for base ties on racking. This fitting cannot be used where the pipe through sleeve 'A' is required to be joined within the fitting.

Price:£7.02£8.42

Kee Klamp 10-840C Single Handrail Socket Capped 48.3 O/D 500 Series

Kee Klamp 10-840C Single Handrail Socket Capped 48.3 O/D 500 Series

Type 10-840C 500 Series Single Handrail Socket Capped Galvanised Cast Iron Fitting Easily augmented with fittings from the established Kee Klamp Range Size 8

Price:£9.75£11.70

Kee Klamp 10-848 Single Handrail Socket 48.3 O/D 500 Series

Kee Klamp 10-848 Single Handrail Socket 48.3 O/D 500 Series

Designed to help builders, contractors and specifiers ensure that all commercial and public buildings satisfy the requirements of the Disability Discrimination Act (DDA) and builing regulations Pt.M : 2004 The building regulations recommend an outside diameter tube size for DDA compliant installations of between 40-45mm The new Kee Klamp 500 series of Kee Klamp fittings is specifically designed to give a smooth handrail with size 7 tube (outside diameter 42.4mm) and is therefore compatible with recommendations Galvanised cast iron fitting Easily augmented with fittings from the established Kee Klamp range

Price:£8.88£10.66

Kee Klamp 10-87 Single Socket Tee 48.3 x 42.4 O/D

Kee Klamp 10-87 Single Socket Tee 48.3 x 42.4 O/D

Designed to give a 90° butt joint between two tubes. Frequently used for the joint between end uprights and the middle rail on safety railing where the site is straight and level. Also for base ties on racking. This fitting cannot be used where the pipe through sleeve 'A' is required to be joined within the fitting.

Price:£8.24£9.89

Kee Klamp 114-8 Swivel Tee 48.3 O/D

Kee Klamp 114-8 Swivel Tee 48.3 O/D

An internal swivel fitting, designed to accommodate varying angles on handrailing for staircases, ramps, or bracing Used in conjunction with Types 10, 15, 25 or 45, it eliminates the need for specially drilled angle fitting Type 27 and Type 28.

Price:£10.54£12.65

Kee Klamp 115-8 Wall Flange 48.3 O/D

Kee Klamp 115-8 Wall Flange 48.3 O/D

Type 115 is designed for palm fixing of guardrailing and balustrading to walls, parapets, steps and ramps. The upright cannot drop through the socket. Packer Plates (Type S115) are available to allow the fitting to be positioned in channels, slots, and other offset areas.

Price:£18.50£22.20

Kee Klamp 12-8 45° Single Socket Tee 48.3 O/D

Kee Klamp 12-8 45° Single Socket Tee 48.3 O/D

Most frequently used for bracing and struts. Engineered to create 45° angles

Price:£9.99£11.99

Kee Klamp 14-6 Straight Coupling 33.7 O/D

Kee Klamp 14-6 Straight Coupling 33.7 O/D

Designed to form an inline joint between two pieces of tube of the same size. Where a constant diameter is required along the outside of the tube (such as for ADA handrail or garment storage),

Price:£5.38£6.46

Kee Klamp 14-7 Straight Coupling 42.4 O/D

Kee Klamp 14-7 Straight Coupling 42.4 O/D

Designed to form an inline joint between two pieces of tube of the same size. Where a constant diameter is required along the outside of the tube (such as for ADA handrail or garment storage),

Price:£6.66£7.99

Kee Klamp 14-8 Straight Coupling 48.3 O/D

Kee Klamp 14-8 Straight Coupling 48.3 O/D

Designed to form an inline joint between two pieces of tube of the same size. Where a constant diameter is required along the outside of the tube (such as for ADA handrail or garment storage)

Price:£7.58£9.10

Kee Klamp 15-6 90° Elbow 33.7 O/D

Kee Klamp 15-6 90° Elbow 33.7 O/D

Most frequently used as an end joint for the top rail of safety railing on a level site. 90° elbow joint

Price:£5.67£6.80

Kee Klamp 15-7 90° Elbow 42.4 O/D

Kee Klamp 15-7 90° Elbow 42.4 O/D

Most frequently used as an end joint for the top rail of safety railing on a level site. 90° elbow joint

Price:£6.92£8.30

Kee Klamp 15-8 90° Elbow 48.3 O/D

Kee Klamp 15-8 90° Elbow 48.3 O/D

Most frequently used as an end joint for the top rail of safety railing on a level site. 90° elbow joint

Price:£8.55£10.26

Kee Klamp 16-7 Clamp-on Tee 42.4 O/D

Kee Klamp 16-7 Clamp-on Tee 42.4 O/D

Widely used for adding to and modifying existing structures. This performs the same function as a Type 10, but because of its open socket, it can be added to a complete structure.

Price:£10.96£13.15

Kee Klamp 17-8 Clamp-on Crossover 48.3 O/D

Kee Klamp 17-8 Clamp-on Crossover 48.3 O/D

Designed to provide a 90° cross-over joint. Can be added to an existing structure. Pipe should not be joined within this fitting.

Price:£7.54£9.05

Kee Klamp 18-6 Internal Coupling 33.7 O/D

Kee Klamp 18-6 Internal Coupling 33.7 O/D

An internal spigot providing a flush joint between two pipes of the same diameter. Not as strong as Type 14 and must not be used where a direct tensile load is applied. This fitting can only be used with Schedule 40 steel pipe. PA Warning: Danger: Type 18 fitting must not be used as a load bearing joint.

Price:£5.69£6.83

Kee Klamp 18-7 Internal Coupling 42.4 O/D

Kee Klamp 18-7 Internal Coupling 42.4 O/D

An internal spigot providing a flush joint between two pipes of the same diameter. Not as strong as Type 14 and must not be used where a direct tensile load is applied. This fitting can only be used with Schedule 40 steel pipe. PA Warning: Danger: Type 18 fitting must not be used as a load bearing joint.

Price:£6.99£8.39

Kee Klamp 18-8 Internal Coupling 48.3 O/D

Kee Klamp 18-8 Internal Coupling 48.3 O/D

An internal spigot providing a flush joint between two pipes of the same diameter. Not as strong as Type 14 and must not be used where a direct tensile load is applied. This fitting can only be used with Schedule 40 steel pipe. PA Warning: Danger: Type 18 fitting must not be used as a load bearing joint.

Price:£7.80£9.36

Kee Klamp 19-7 Adjustable Side Outlet Tee 42.4 O/D

Kee Klamp 19-7 Adjustable Side Outlet Tee 42.4 O/D

Used in pairs to form variable angle joints between 90° and 180°. When calculating cutting lengths for pipe, dimension 'E' should be subtracted to give true pipe length.

Price:£7.79£9.35

Kee Klamp 19-8 Adjustable Side Outlet Tee 48.3 O/D

Kee Klamp 19-8 Adjustable Side Outlet Tee 48.3 O/D

Used in pairs to form variable angle joints between 90° and 180°. When calculating cutting lengths for pipe, dimension 'E' should be subtracted to give true pipe length. In the case of Type 19-8, you can produce an angle range between 60° and 180°.

Price:£8.02£9.62

Kee Klamp 20-6 Side Outlet Elbow 33.7 O/D

Kee Klamp 20-6 Side Outlet Elbow 33.7 O/D

A 90° corner joint most frequently used for the top rail of safety railing. It can also be considered for the corner joint of benches, work tables, and other rectangular structures.

Price:£7.06£8.47

Kee Klamp 20-7 Side Outlet Elbow 42.4 O/D

Kee Klamp 20-7 Side Outlet Elbow 42.4 O/D

A 90° corner joint most frequently used for the top rail of safety railing It can also be considered for the corner joint of benches, work tables, and other rectangular structures.

Price:£9.35£11.22

Kee Klamp 20-8 Side Outlet Elbow 48.3 O/D

Kee Klamp 20-8 Side Outlet Elbow 48.3 O/D

A 90° corner joint most frequently used for the top rail of safety railing. It can also be considered for the corner joint of benches, work tables, and other rectangular structures.

Price:£11.56£13.87

Kee Klamp 21-6 90° Side Outlet Tee 33.7 O/D

Kee Klamp 21-6 90° Side Outlet Tee 33.7 O/D

Most frequently paired with Type 20 to give a 90° corner joint for the middle rail of safety railing and other rectangular structures The upright passes through the fitting.

Price:£5.71£6.85

Kee Klamp 21-7 90° Side Outlet Tee 42.4 O/D

Kee Klamp 21-7 90° Side Outlet Tee 42.4 O/D

Most frequently paired with Type 20 to give a 90° corner joint for the middle rail of safety railing and other rectangular structures. The upright passes through the fitting.

Price:£7.83£9.40

Kee Klamp 21-8 90° Side Outlet Tee 48.3 O/D

Kee Klamp 21-8 90° Side Outlet Tee 48.3 O/D

Most frequently paired with Type 20 to give a 90° corner joint for the middle rail of safety railing and other rectangular structures. The upright passes through the fitting.

Price:£8.57£10.28

Kee Klamp 25-6 Three Socket Tee 33.7 O/D

Kee Klamp 25-6 Three Socket Tee 33.7 O/D

Most commonly used as the 90° joint between the top rail and an intermediate upright on safety railing. As there are two socket set screws in the sleeve, this fitting can be used where a join is required in the horizontal tube. The Type 10 fitting can be used as an alternative when a join in the tube is not required.

Price:£6.58£7.90

Kee Klamp 25-7 Three Socket Tee 42.4 O/D

Kee Klamp 25-7 Three Socket Tee 42.4 O/D

Most commonly used as the 90° joint between the top rail and an intermediate upright on safety railing. As there are two socket set screws in the sleeve, this fitting can be used where a join is required in the horizontal tube. The Type 10 fitting can be used as an alternative when a join in the tube is not required.

Price:£9.00£10.80

Kee Klamp 25-8 Three Socket Tee 48.3 O/D

Kee Klamp 25-8 Three Socket Tee 48.3 O/D

Most commonly used as the 90° joint between the top rail and an intermediate upright on safety railing. As there are two socket set screws in the sleeve, this fitting can be used where a join is required in the horizontal tube. The Type 10 fitting can be used as an alternative when a join in the tube is not required.

Price:£9.91£11.89

Kee Klamp 26-6 Two Socket Cross 33.7 O/D

Kee Klamp 26-6 Two Socket Cross 33.7 O/D

Usually paired with Type 25 to give a 90° joint between the middle rail and an intermediate upright on safety railing. The upright passes through the fitting.

Price:£6.46£7.75

Kee Klamp 26-7 Two Socket Cross 42.4 O/D

Kee Klamp 26-7 Two Socket Cross 42.4 O/D

Usually paired with Type 25 to give a 90° joint between the middle rail and an intermediate upright on safety railing. The upright passes through the fitting.

Price:£7.51£9.01

Kee Klamp 26-8 Two Socket Cross 48.3 O/D

Kee Klamp 26-8 Two Socket Cross 48.3 O/D

Usually paired with Type 25 to give a 90° joint between the middle rail and an intermediate upright on safety railing. The upright passes through the fitting.

Price:£9.30£11.16

Kee Klamp 26-840 Twin Handrail Socket 48.3 O/D 500 Series

Kee Klamp 26-840 Twin Handrail Socket 48.3 O/D 500 Series

Type 26-840 500 Series Twin Handrail Socket 26-840 - Twin Handrail Socket Galvanised Cast Iron Fitting Easily augmented with fittings from the established Kee Klamp Range Size 8

Price:£10.02£12.02

Kee Klamp 26-840C Twin Handrail Socket Capped 48.3 O/D 500 Series

Kee Klamp 26-840C Twin Handrail Socket Capped 48.3 O/D 500 Series

Type 26-840C 500 Series Twin Handrail Socket Capped 26-840c - Twin Handrail Socket Capped Galvanised Cast Iron Fitting Easily augmented with fittings from the established Kee Klamp Range Size 8

Price:£10.93£13.12

Kee Klamp 26-87 Two Socket Cross 48.3 x 42.4 O/D

Kee Klamp 26-87 Two Socket Cross 48.3 x 42.4 O/D

Usually paired with Type 25 to give a 90° joint between the middle rail and an intermediate upright on safety railing. The upright passes through the fitting.

Price:£21.25£25.50

Kee Klamp 27-8 Three Socket Custom Tee 48.3 O/D

Kee Klamp 27-8 Three Socket Custom Tee 48.3 O/D

Used for safety railing on slopes between 0° and 45°, between the top rail and an intermediate upright which is required to remain vertical. These fittings are held in stock as blanks which are machined to individual requirements. It is essential when ordering that the required angle is stated.

Price:£24.53£29.44

Kee Klamp 29-6 30° to 60° Single Socket Tee 33.7 O/D

Kee Klamp 29-6 30° to 60° Single Socket Tee 33.7 O/D

Designed as an alternative to the Type 12 fitting, this adjustable fitting is most frequently used for bracing and struts. It may be used at any selected angle between 30° and 60°.

Price:£6.70£8.04

Kee Klamp 29-7 30° to 60° Single Socket Tee 42.4 O/D

Kee Klamp 29-7 30° to 60° Single Socket Tee 42.4 O/D

Designed as an alternative to the Type 12 fitting, this adjustable fitting is most frequently used for bracing and struts. It may be used at any selected angle between 30° and 60°.

Price:£8.36£10.03

Kee Klamp 29-8 30° to 60° Single Socket Tee 48.3 O/D

Kee Klamp 29-8 30° to 60° Single Socket Tee 48.3 O/D

Designed as an alternative to the Type 12 fitting, this adjustable fitting is most frequently used for bracing and struts. It may be used at any selected angle between 30° and 60°.

Price:£9.30£11.16

Kee Klamp 30-7 30° to 45° Adjustable Cross 42.4 O/D

Kee Klamp 30-7 30° to 45° Adjustable Cross 42.4 O/D

Designed as an alternative to the Type 28 fitting, this adjustable fitting can be used for railing on staircases between the midrail and an intermediate upright which is required to remain vertical. It may be used at any selected angle between 30° and 45°.

Price:£18.76£22.51

Kee Klamp 35-7 Three Socket Cross 42.4 O/D

Kee Klamp 35-7 Three Socket Cross 42.4 O/D

Most frequently used to tie uprights with horizontal pipes in three directions, all at 90° to the upright . The upright passes through the fitting.

Price:£10.41£12.49

Kee Klamp 35-8 Three Socket Cross 48.3 O/D

Kee Klamp 35-8 Three Socket Cross 48.3 O/D

Most frequently used to tie uprights with horizontal pipes in three directions, all at 90° to the upright. The upright passes through the fitting.

Price:£11.02£13.22

Kee Klamp 350-8 Eaves Fitting 48.3 O/D

Kee Klamp 350-8 Eaves Fitting 48.3 O/D

The Type 350 fitting has been designed for small structural building applications and provides for significant load rating. When used with the Type 351 ridge fitting a truss arrangement for additional support can be achieved. Double set screws are provided on the truss outlet to provide additional pull out resistance to hold structures firmly together.

Price:£14.93£17.92

Kee Klamp 350-8 Ridge Fitting 48.3 O/D

Kee Klamp 350-8 Ridge Fitting 48.3 O/D

The Type 351 fitting has been designed for small structural building applications and provides for significant load rating When used with the Type 350 eave fitting a truss arrangement for additional support can be achieved. Double set screws are provided on the downward truss outlet to provide additional pull out resistance and extra strength to the structure.

Price:£12.72£15.26

Kee Klamp 40-6 Four Socket Cross 33.7 O/D

Kee Klamp 40-6 Four Socket Cross 33.7 O/D

Most frequently used in multiple upright structures to tie a center upright with horizontal pipes in four directions. The upright passes through the fitting.

Price:£10.81£12.97

Kee Klamp 40-7 Four Socket Cross 42.4 O/D

Kee Klamp 40-7 Four Socket Cross 42.4 O/D

Most frequently used in multiple upright structures to tie a center upright with horizontal pipes in four directions. The upright passes through the fitting.

Price:£15.52£18.62

Kee Klamp 40-8 Four Socket Cross 48.3 O/D

Kee Klamp 40-8 Four Socket Cross 48.3 O/D

Most frequently used in multiple upright structures to tie a center upright with horizontal pipes in four directions. The upright passes through the fitting.

Price:£17.93£21.52

Kee Klamp 45-6 Crossover 33.7 O/D

Kee Klamp 45-6 Crossover 33.7 O/D

Designed to give a 90° offset crossover joint. Frequently used on safety railing, where, to reduce cost by minimizing the pipe cuts, a continuous horizontal rail is used. Pipe cannot be joined within this fitting. It may be also used to give intermediate levels on racks, etc, when horizontal ties between uprights across the section are not required.

Price:£5.04£6.05

Kee Klamp 45-7 Crossover 42.4 O/D

Kee Klamp 45-7 Crossover 42.4 O/D

Designed to give a 90° offset crossover joint Frequently used on safety railing, where, to reduce cost by minimizing the pipe cuts, a continuous horizontal rail is used. Pipe cannot be joined within this fitting. It may be also used to give intermediate levels on racks, etc, when horizontal ties between uprights across the section are not required.

Price:£6.42£7.70

Kee Klamp 45-8 Crossover 48.3 O/D

Kee Klamp 45-8 Crossover 48.3 O/D

Designed to give a 90° offset crossover joint. Frequently used on safety railing, where, to reduce cost by minimizing the pipe cuts, a continuous horizontal rail is used. Pipe cannot be joined within this fitting. It may be also used to give intermediate levels on racks, etc, when horizontal ties between uprights across the section are not required.

Price:£7.29£8.75

Kee Klamp 508-7 Gap Washer 42.4 O/D 500 Series

Kee Klamp 508-7 Gap Washer 42.4 O/D 500 Series

Gap Washer. To fill the gap between the 518-7 and the 10-840C or 10-848 Handrail Socket

Price:£1.65£1.98

Kee Klamp 515-7 Split Elbow 42.4 O/D 500 Series

Kee Klamp 515-7 Split Elbow 42.4 O/D 500 Series

Split Elbow. Corner Elbow consisting of two separate pieces

Price:£14.37£17.24

Kee Klamp 518-7 Handrail Bracket 42.4 O/D 500 Series

Kee Klamp 518-7 Handrail Bracket 42.4 O/D 500 Series

To be used in conjunction with the 10-840C, 10-848, or A10 Handrail Sockets. Pipe for the railing is to be 1-1/4" Schedule 40 Pipe with a 1.66" O.D. Use either 4.8mm x 15mm long aluminum 'multi-grip' pop rivets or No.10 x 20mm countersunk self-tapping screws (not included). You may want to add the 508-7 Gap Washer with each 518-7.

Price:£9.98£11.98

Kee Klamp 520-7 90° Solid Elbow 42.4 O/D 500 Series

Kee Klamp 520-7 90° Solid Elbow 42.4 O/D 500 Series

Type 520 500 Series 90 Deg Solid Elbow 520-7 90 Degree Solid Elbow Galvanised Cast Iron Fitting Easily augmented with fittings from the established Kee Klamp Range Size 7

Price:£8.35£10.02

Kee Klamp 55-7 Obtuse Angle Elbow 42.4 O/D

Kee Klamp 55-7 Obtuse Angle Elbow 42.4 O/D

Obtuse Angle Elbow 42.4 mm O/D The Type 55 is an ideal fitting to use as an alternative to bending, or when a junction between a sloping pipe and an end post is required - i.e., guardrailing and staircases.

Price:£8.00£9.60

Kee Klamp 55-8 Obtuse Angle Elbow 48.3 O/D

Kee Klamp 55-8 Obtuse Angle Elbow 48.3 O/D

Obtuse Angle Elbow 48.3 mm O/D The Type 55 is an ideal fitting to use as an alternative to bending, or when a junction between a sloping pipe and an end post is required - i.e., guardrailing and staircases.

Price:£8.95£10.74

Kee Klamp 554-7 Variable Angle 42.4 O/D 500 Series

Kee Klamp 554-7 Variable Angle 42.4 O/D 500 Series

Type 554 500 Series Variable Angle Elbow 554-7 Variable Angle Galvanised Cast Iron Fitting Easily augmented with fittings from the established Kee Klamp Range Size 7

Price:£19.02£22.82

Kee Klamp 555-8 Top Fix Rail Assembly

Kee Klamp 555-8 Top Fix Rail Assembly

An in-line, adjustable angle, single top-rail mounted component for use where a guidance handrail is required and where there is no need for a twin-rail guardrail style system. Saddle has a variable angle of 60 degrees from vertical. Top Fix Rail Assembly.

Price:£14.36£17.23

Kee Klamp 56-8 Acute Angle Elbow 48.3 O/D

Kee Klamp 56-8 Acute Angle Elbow 48.3 O/D

Kee Klamp 56-8 Acute Angle Elbow 48.3 O/D Type 56 is an ideal fitting to use as an alternative to bending, or when a junction between a sloping pipe and an end post is required - i.e., guardrailing and staircases.

Price:£10.00£12.00

Kee Klamp 565-7 Wall Mounted End Return 42.4 O/D 500 Series

Kee Klamp 565-7 Wall Mounted End Return 42.4 O/D 500 Series

wall mounted handrail return bracket. Bracket is joined to handrail usig Type 514-7 coupling. Three fixing holes are drilled and countersunk to suit No. 14 csk screws.

Price:£9.52£11.42

Kee Klamp 567-7 End Post Handrail Return 42.4 O/D 500 Series

Kee Klamp 567-7 End Post Handrail Return 42.4 O/D 500 Series

A handrail return bracket for use when mounting railing to an upright. This handrail is mounted to an upright using a handrail socket. Join the return handrail using Type 514-7 internal coupling.

Price:£8.98£10.78

Kee Klamp 570-7 Wall Mounted Handrail Bracket 42.4 O/D 500 Series

Kee Klamp 570-7 Wall Mounted Handrail Bracket 42.4 O/D 500 Series

A wall mounted version of the 518-7. The handrail tube sits on the saddle and is secured using either No. 10 self-drilling screws or multi-grip pop rivets. This bracket provides holes for countersunk head fixing screws only. Three fixing holes are drilled and countersunk to suit 6mm diameter csk screws.

Price:£9.98£11.98

Kee Klamp 60-8 Extra Heavy Flange 48.3 O/D

Kee Klamp 60-8 Extra Heavy Flange 48.3 O/D

A heavy duty flange, with wide base, for spreading loads over a large surface area. This flange, with holes provided for countersunk flat head screw fixings only, is for use on structures where the fixing required is positional only. Frequently used as a wall fixing bracket. PA Warning: It is not recommended for use as a base flange to support guardrailing or balustrading.

Price:£15.64£18.77

Kee Klamp 61-6 Wall Flange 33.7 O/D

Kee Klamp 61-6 Wall Flange 33.7 O/D

This flange, with holes provided for countersunk flat head screw fixings only, is used on structures where the fixing required is positional only. Frequently used as a wall fixing bracket. PA Warning: It is not recommended for use as a base flange to support guardrailing or balustrading.

Price:£5.25£6.30

Kee Klamp 61-7 Wall Flange 42.4 O/D

Kee Klamp 61-7 Wall Flange 42.4 O/D

This flange, with holes provided for countersunk flat head screw fixings only, is used on structures where the fixing required is positional only. Frequently used as a wall fixing bracket. PA Warning: It is not recommended for use as a base flange to support guardrailing or balustrading.

Price:£6.54£7.85

Kee Klamp 61-8 Wall Flange 48.3 O/D

Kee Klamp 61-8 Wall Flange 48.3 O/D

This flange, with holes provided for countersunk flat head screw fixings only, is used on structures where the fixing required is positional only. Frequently used as a wall fixing bracket. PA Warning: It is not recommended for use as a base flange to support guardrailing or balustrading.

Price:£7.96£9.55

Kee Klamp 62-6 Standard Railing Flange 33.7 O/D

Kee Klamp 62-6 Standard Railing Flange 33.7 O/D

Ideal when a structural fixing is required. When fixing guardrailing and balustrades, Type 62 should always be used. The holes are of sufficient diameter to insure proper fixing with either a mechanical or chemical anchor. The two set screws in the vertical socket give greater sideload stability to the upright. It is recommended that the fixing holes in the flange should be in line with the applied load.

Price:£7.59£9.11

Kee Klamp 62-7 Standard Railing Flange 42.4 O/D

Kee Klamp 62-7 Standard Railing Flange 42.4 O/D

Ideal when a structural fixing is required. When fixing guardrailing and balustrades, Type 62 should always be used. The holes are of sufficient diameter to insure proper fixing with either a mechanical or chemical anchor. The two set screws in the vertical socket give greater sideload stability to the upright. It is recommended that the fixing holes in the flange should be in line with the applied load.

Price:£8.53£10.24

Kee Klamp 62-8 Standard Railing Flange 48.3 O/D

Kee Klamp 62-8 Standard Railing Flange 48.3 O/D

Ideal when a structural fixing is required for guard rail and balustrades. The holes are of sufficient diameter to ensure proper fixing with either a mechanical or chemical anchor. The two set screws in the vertical socket give greater side-load stability to the upright. It is recommended that the fixing holes in the flange should be in line with the applied load. Ø indicates the diameter of the fixing hole.

Price:£10.46£12.55

Kee Klamp 63-7 Angle Base Flange 42.4 O/D

Kee Klamp 63-7 Angle Base Flange 42.4 O/D

This fitting is similar to Type 62, but is used to set up the upright at an angle between 45° to 60°. This fitting should only be subjected to light loads, which cannot be positioned at 90° to the applied load. For greater loads or other pipe sizes, a Type 62 flange is used and the upright bent to the required angle.

Price:£12.02£14.42

Kee Klamp 64-6 Side Palm Standard Vertical Railing Base 33.7 O/D

Kee Klamp 64-6 Side Palm Standard Vertical Railing Base 33.7 O/D

This fitting is designed for fixing guardrailing and balustrading to walls, parapets, steps and ramps. The upright cannot drop through the socket. Access to the top fixing hole is restricted by the position of the flange to the barrel. When selecting a hexagon head bolt or similar bolt fixing, the maximum length of the bolt including the head must not exceed 1".

Price:£12.04£14.45

Kee Klamp 64-7 Side Palm Standard Vertical Railing Base 42.4 O/D

Kee Klamp 64-7 Side Palm Standard Vertical Railing Base 42.4 O/D

This fitting is designed for fixing guardrailing and balustrading to walls, parapets, steps and ramps. The upright cannot drop through the socket. Access to the top fixing hole is restricted by the position of the flange to the barrel. When selecting a hexagon head bolt or similar bolt fixing, the maximum length of the bolt including the head must not exceed 1".

Price:£15.66£18.79

Kee Klamp 64-8 Side Palm Standard Vertical Railing Base 48.3 O/D

Kee Klamp 64-8 Side Palm Standard Vertical Railing Base 48.3 O/D

This fitting is designed for fixing guardrailing and balustrading to walls, parapets, steps and ramps. The upright cannot drop through the socket. Access to the top fixing hole is restricted by the position of the flange to the barrel. When selecting a hexagon head bolt or similar bolt fixing, the maximum length of the bolt including the head must not exceed 1".

Price:£19.14£22.97

Kee Klamp 66-8 Ground Socket 48.3 O/D

Kee Klamp 66-8 Ground Socket 48.3 O/D

A ground socket fitting for setting in concrete; the posts may either be permanent or removable as required. It incorporates a socket set screw fixing and can be supplied with a plug to fill the hole when the pipe is removed. Socket will easily accommodate standard size Schedule 40 Galvanized Steel Pipe & Aluminum Pipe with or without powder coating.

Price:£20.75£24.90

Kee Klamp 67-8 Angle Flange 48.3 O/D

Kee Klamp 67-8 Angle Flange 48.3 O/D

Type 67 has been designed to allow the upright to pivot in the barrel, providing an angular displacement from 3° up to a maximum of 11°, measured from the vertical. Ideal to secure balustrade and guardrail systems on access ramps or other types of slopes.

Price:£13.61£16.33

Kee Klamp 68-7 Side Palm Wall Flange 42.4 O/D

Kee Klamp 68-7 Side Palm Wall Flange 42.4 O/D

Side fixing for guardrailing and balustrading to walls, parapets, steps and ramps. The upright cannot drop through the socket. PA Warning: If the upright is required to pass through the fitting by machining out the base stop, the bottom fixing hole will be unusable.

Price:£11.63£13.96

Kee Klamp 68-8 Side Palm Wall Flange 48.3 O/D

Kee Klamp 68-8 Side Palm Wall Flange 48.3 O/D

Side fixing for guardrailing and balustrading to walls, parapets, steps and ramps. The upright cannot drop through the socket. PA Warning: If the upright is required to pass through the fitting by machining out the base stop, the bottom fixing hole will be unusable.

Price:£12.85£15.42

Kee Klamp 69-6 Railing Flange With Toeboard Adaptor 33.7 O/D

Kee Klamp 69-6 Railing Flange With Toeboard Adaptor 33.7 O/D

The Type 69 fitting has been designed for guardrailing and balustrading applications and provides the added benefit of attaching a toeboard to the base. The base plate holes are of sufficient diameter to allow for attachment with either a mechanical or chemical anchor, the side plates have slotted holes to allow for a degree of sideways movement for ease of installation. A toeplate designed for use with the Type 69 fitting is available from Kee Klamp Ltd.

Price:£9.21£11.05

Kee Klamp 69-7 Railing Flange With Toeboard Adaptor 42.4 O/D

Kee Klamp 69-7 Railing Flange With Toeboard Adaptor 42.4 O/D

The Type 69 fitting has been designed for guardrailing and balustrading applications and provides the added benefit of attaching a toeboard to the base. The base plate holes are of sufficient diameter to allow for attachment with either a mechanical or chemical anchor, the side plates have slotted holes to allow for a degree of sideways movement for ease of installation. A toeplate designed for use with the Type 69 fitting is available from Kee Klamp Ltd.

Price:£9.49£11.39

Kee Klamp 70-6 Rail Support 33.7 O/D

Kee Klamp 70-6 Rail Support 33.7 O/D

This fitting, with holes provided for countersunk flat head screw fixings only, is designed to carry handrails along walls or to fix structures back to walls. The pipe passes through the fitting and cannot be joined within the fitting. Type 70 is also used to attach toeboards to the base of guardrail uprights. PA Warning: These fittings are not to be used as base flanges for full height guardrails.

Price:£5.57£6.68

Kee Klamp 70-7 Rail Support 42.4 O/D

Kee Klamp 70-7 Rail Support 42.4 O/D

This fitting, with holes provided for countersunk flat head screw fixings only, is designed to carry handrails along walls or to fix structures back to walls. The pipe passes through the fitting and cannot be joined within the fitting. Type 70 is also used to attach toeboards to the base of guardrail uprights. PA Warning: These fittings are not to be used as base flanges for full height guardrails.

Price:£7.54£9.05

Kee Klamp 70-8 Rail Support Rail Support 48.3 O/D

Kee Klamp 70-8 Rail Support Rail Support 48.3 O/D

This fitting, with holes provided for countersunk flat head screw fixings only, is designed to carry handrails along walls or to fix structures back to walls. The pipe passes through the fitting and cannot be joined within the fitting. Type 70 is also used to attach toeboards to the base of guardrail uprights. PA Warning: These fittings are not to be used as base flanges for full height guardrails.

Price:£8.84£10.61

Kee Klamp 72-8 Stair Tread Support 48.3 O/D

Kee Klamp 72-8 Stair Tread Support 48.3 O/D

Type 72 is a stair tread support suitable for most types of stair tread, including timber, open steel and checker plate. Fixing of the treads is by two bolt holes in each fitting. PA Warning: If Type 72 fittings are to be used for a permanent application or subjected to high loads, the stair tread support pipe which is located at its ends with a single set screw, should be drilled and pinned to avoid rotational slip.

Price:£17.30£20.76

Kee Klamp 76-7 Hook 42.4 O/D

Kee Klamp 76-7 Hook 42.4 O/D

Kee Klamp 76-7 Hook 42.4 O/D A fitting normally used for attachment of chains.

Price:£5.77£6.92

Kee Klamp 76-8 Hook 48.3 O/D

Kee Klamp 76-8 Hook 48.3 O/D

Kee Klamp 76-8 Hook 48.3 O/D A fitting normally used for attachment of chains.

Price:£5.77£6.92

Kee Klamp 77-6 Plastic Plug 33.7 O/D

Kee Klamp 77-6 Plastic Plug 33.7 O/D

Kee Klamp 77-6 Plastic Plug 33.7 O/D A grey plastic plug to fit open ended pipes.

Price:£0.61£0.73

Kee Klamp 77-7 Plastic Plug 42.4 O/D

Kee Klamp 77-7 Plastic Plug 42.4 O/D

Kee Klamp 77-7 Plastic Plug 42.4 O/D A grey plastic plug to fit open ended pipes.

Price:£0.82£0.98

Kee Klamp 77-8 Plastic Plug 48.3 O/D

Kee Klamp 77-8 Plastic Plug 48.3 O/D

Kee Klamp 77-8 Plastic Plug 48.3 O/D A grey plastic plug to fit open ended pipes.

Price:£0.92£1.10

Kee Klamp 78-7 Eye Fitting 42.4 O/D

Kee Klamp 78-7 Eye Fitting 42.4 O/D

Kee Klamp 78-7 Eye Fitting 42.4 O/D A fitting used in conjunction with Type 83 fitting for gate hinges.

Price:£5.45£6.54

Kee Klamp 78-8 Eye Fitting 48.3 O/D

Kee Klamp 78-8 Eye Fitting 48.3 O/D

Kee Klamp 78-8 Eye Fitting 48.3 O/D A fitting used in conjunction with Type 83 fitting for gate hinges.

Price:£6.05£7.26

Kee Klamp 81-7 Mesh Panel Single Sided Clip 42.4 O/D

Kee Klamp 81-7 Mesh Panel Single Sided Clip 42.4 O/D

Single clips for attaching wire-mesh infilling. For economy it is possible to use Type 81 clips without the safety attachment, to secure various types of infill panels (plyboard, perspex, etc.) up to a thickness of 25/64". All clips are supplied with hexagonal head fixing bolts, M6x35mm long, and nut.

Price:£2.69£3.23

Kee Klamp 81-8 Mesh Panel Single Sided Clip 48.3 O/D

Kee Klamp 81-8 Mesh Panel Single Sided Clip 48.3 O/D

Single clips for attaching wire-mesh infilling. For economy it is possible to use Type 81 clips without the safety attachment, to secure various types of infill panels (plyboard, perspex, etc.) up to a thickness of 25/64". All clips are supplied with hexagonal head fixing bolts, M6x35mm long, and nut.

Price:£2.69£3.23

Kee Klamp 82-7 Mesh Panel Double Sided Clip 42.4 O/D284

Kee Klamp 82-7 Mesh Panel Double Sided Clip 42.4 O/D284

Double clips for attaching wire-mesh infilling. For economy it is possible to use Type 82 clips without the safety attachment, to secure various types of infill panels (plyboard, perspex, etc.) up to a thickness of 25/64". All clips are supplied with hexagonal head fixing bolts, M6x35mm long, and nut. The primary clip has a slot measuring 8mm x 15mm.

Price:£4.07£4.88

Kee Klamp 82-8 Mesh Panel Double Sided Clip 48.3 O/D

Kee Klamp 82-8 Mesh Panel Double Sided Clip 48.3 O/D

Double clips for attaching wire-mesh infilling. For economy it is possible to use Type 82 clips without the safety attachment, to secure various types of infill panels (plyboard, perspex, etc.) up to a thickness of 25/64". All clips are supplied with hexagonal head fixing bolts, M6x35mm long, and nut. The primary clip has a slot measuring 8mm x 15mm.

Price:£4.07£4.88

Kee Klamp 83-8 Gate Hinge Pin Fitting 48.3 O/D

Kee Klamp 83-8 Gate Hinge Pin Fitting 48.3 O/D

Kee Klamp 83-8 Gate Hinge Pin Fitting 48.3 O/D This fitting is used in conjunction with Type 78 for gate hinges.

Price:£6.87£8.24

Kee Klamp 84-7 Drive In Cast Metal Plug 42.4 O/D

Kee Klamp 84-7 Drive In Cast Metal Plug 42.4 O/D

Kee Klamp 84-7 Drive In Cast Metal Plug 42.4 O/D A metal drive-in plug which is difficult to remove when installed.

Price:£3.88£4.66

Kee Klamp 84-8 Drive In Cast Metal Plug 48.3 O/D

Kee Klamp 84-8 Drive In Cast Metal Plug 48.3 O/D

Kee Klamp 84-8 Drive In Cast Metal Plug 48.3 O/D A metal drive-in plug which is difficult to remove when installed.

Price:£4.80£5.76

Kee Klamp 84-848 Upright Cast Iron Plug 48.3 O/D 500 Series

Kee Klamp 84-848 Upright Cast Iron Plug 48.3 O/D 500 Series

Kee Klamp 84-848 Upright Cast Iron Plug 48.3 O/D 500 Series Dast Iron Upright Top Cap.

Price:£3.66£4.39

Kee Klamp 87-8 Angle Elbow 48.3 O/D

Kee Klamp 87-8 Angle Elbow 48.3 O/D

Kee Klamp 87-8 Angle Elbow 48.3 O/D Used to join the top rail to an end upright on a guardrail on a slope from 0° to 11° at both top and bottom of the run.

Price:£11.35£13.62

Kee Klamp 88-8 Three Socket Angle Tee 48.3 O/D

Kee Klamp 88-8 Three Socket Angle Tee 48.3 O/D

Used to join the top rail to an intermediate upright on a guardrail on a slope from 0° to 11°. As there are two socket set screws in the sleeve, this fitting can be used to join two ends of rail.

Price:£13.90£16.68

Kee Klamp 89-8 Two Socket Angle Cross 48.3 O/D

Kee Klamp 89-8 Two Socket Angle Cross 48.3 O/D

Used to join the middle rail to an intermediate upright on a guardrail on a slope from 0° to 11°. The upright passes through the fitting.

Price:£12.73£15.28

Kee Klamp 90-8 PGR Three Socket Tee 48.3 O/D

Kee Klamp 90-8 PGR Three Socket Tee 48.3 O/D

Kee Klamp 90-8 PGR Three Socket Tee 48.3 O/D Type 90 is used to join the top rail to an intermediate upright (Special Order Only).

Price:£21.82£26.18

Kee Klamp 91-8 PGR Two Socket Cross 48.3 O/D

Kee Klamp 91-8 PGR Two Socket Cross 48.3 O/D

Kee Klamp 91-8 PGR Two Socket Cross 48.3 O/D Type 91 is used to join the midrail to an intermediate upright (Special Order Only).

Price:£21.12£25.34

Kee Klamp 92-8 PGR Elbow 48.3 O/D

Kee Klamp 92-8 PGR Elbow 48.3 O/D

Kee Klamp 92-8 PGR Elbow 48.3 O/D Type 92 is used to join the top rail to an end post (Special Order Only)

Price:£15.37£18.44

Kee Klamp 93-8 PGR Tee 48.3 O/D

Kee Klamp 93-8 PGR Tee 48.3 O/D

Kee Klamp 93-8 PGR Tee 48.3 O/D Type 93 is used to join the midrail to an end post (Special Order Only).

Price:£16.96£20.35

Kee Klamp A10-7 Split Single Socket Tee 42.4 O/D

Kee Klamp A10-7 Split Single Socket Tee 42.4 O/D

Designed to allow additions or extensions to existing structures without the need for dismantling. Tube must not be joined within the fitting. Fitting has strength and function comparable to Type 10 fittings.

Price:£13.24£15.89

Kee Klamp A10-748 Add-on Single Handrail Socket 42.4 O/D 500 Series

Kee Klamp A10-748 Add-on Single Handrail Socket 42.4 O/D 500 Series

Kee Klamp A10-748 Add-on Single Handrail Socket 42.4 O/D 500 Series Add-on Single Handrail Socket.

Price:£16.12£19.34

Kee Klamp A10-8 Split Single Socket Tee 48.3 O/D

Kee Klamp A10-8 Split Single Socket Tee 48.3 O/D

Designed to allow additions or extensions to existing structures without the need for dismantling. Tube must not be joined within the fitting. Fitting has strength and function comparable to Type 10 fittings.

Price:£14.33£17.20

Kee Klamp BC53-8 Swivel Elbow 48.3 O/D

Kee Klamp BC53-8 Swivel Elbow 48.3 O/D

The Type BC53-8 fitting has been designed as a variable angle inline connection, adjustable through 202°. PA Warning: An entire structure should not be constructed from Type53-8 or any other swivel fitting, as these types would not provide sufficient stability or rigidity in the structure due to the free rotation of the fitting.

Price:£14.14£16.97

Kee Klamp C50-66 Single Swivel Socket 33.7 O/D

Kee Klamp C50-66 Single Swivel Socket 33.7 O/D

Kee Klamp C50-66 Single Swivel Socket 33.7 O/D Complete combination fitting.

Price:£9.82£11.78

Kee Klamp C50-77 Single Swivel Socket 42.4 O/D

Kee Klamp C50-77 Single Swivel Socket 42.4 O/D

Kee Klamp C50-77 Single Swivel Socket 42.4 O/D Complete combination fitting.

Price:£11.14£13.37

Kee Klamp C50-88 Single Swivel Socket 48.3 O/D

Kee Klamp C50-88 Single Swivel Socket 48.3 O/D

Kee Klamp C50-88 Single Swivel Socket 48.3 O/D Complete combination fitting.

Price:£12.36£14.83

Kee Klamp C51-777 Double Swivel Socket 42.4 O/D

Kee Klamp C51-777 Double Swivel Socket 42.4 O/D

Type C51 is made by combining two Type F50 fittings and one Type M51. Complete combination fitting.

Price:£18.78£22.54

Kee Klamp C51-888 Double Swivel Socket 48.3 O/D

Kee Klamp C51-888 Double Swivel Socket 48.3 O/D

Type C51 is made by combining two Type F50 fittings and one Type M51 Complete combination fitting.

Price:£20.89£25.07

Kee Klamp C52-777 Corner Swivel Socket, 42.4 O/D

Kee Klamp C52-777 Corner Swivel Socket, 42.4 O/D

Kee Klamp C52-777 Corner Swivel Socket, 42.4 O/D Complete combination fitting.

Price:£19.86£23.83

Kee Klamp C52-888 Corner Swivel Socket 48.3 O/D

Kee Klamp C52-888 Corner Swivel Socket 48.3 O/D

Kee Klamp C52-888 Corner Swivel Socket 48.3 O/D Complete combination fitting.

Price:£21.72£26.06

Kee Klamp C58-6 Swivel Flange 33.7 O/D

Kee Klamp C58-6 Swivel Flange 33.7 O/D

A swivel fitting for attachment of angled pipe to a flat surface. PA Warning: It is not recommended for use as a base flange to support guardrailing, balustrading or other types of structure.

Price:£11.09£13.31

Kee Klamp C58-7 Swivel Flange 42.4 O/D

Kee Klamp C58-7 Swivel Flange 42.4 O/D

A swivel fitting for attachment of angled pipe to a flat surface. PA Warning: It is not recommended for use as a base flange to support guardrailing, balustrading or other types of structure.

Price:£12.03£14.44

Kee Klamp C58-8 Swivel Flange 48.3 O/D

Kee Klamp C58-8 Swivel Flange 48.3 O/D

A swivel fitting for attachment of angled pipe to a flat surface. PA Warning: It is not recommended for use as a base flange to support guardrailing, balustrading or other types of structure.

Price:£12.94£15.53

Kee Klamp F50-8 Female Single Swivel Socket Member 48.3 O/D

Kee Klamp F50-8 Female Single Swivel Socket Member 48.3 O/D

Kee Klamp F50-8 Female Single Swivel Socket Member 48.3 O/D One part of a combination fitting.

Price:£6.57£7.88

Kee Klamp M51-7 Male Double Swivel Socket Member 42.4 O/D

Kee Klamp M51-7 Male Double Swivel Socket Member 42.4 O/D

One part of a type C51 combination fitting. This fitting can also be used for attaching flat panels to tubular structures.

Price:£7.27£8.72