Clamping collet with locking nut With locking nut For router shaft 6.35 mm Cutter shaft sizes available: 6.35mm
Below are our Festool products. You can click on each product to view a full description and specification.
Clamping collet with locking nut With locking nut For router shaft 6.35 mm Cutter shaft sizes available: 6.35mm
Festool Base Runner Plastic all-round base for wood or similar materials Durable laminated fabric base runner for wood or similar materials, for use with PS, PSC, PSB, PSBC 400
Festool Bit Box Content 10 pieces: TX 10 2x TX 15 3x TX 20 2x TX 25 TX 30 CENTROTEC magnetic bit fastener BH 60 CE
Festool Connecting Piece, to connect guide rails for long workpieces. Use to connect two guide rails for long workpieces. FS/2 guide rails require 2 connectors.
Festool Copying Ring Copying ring for gauging routing templates, inserted in router without using tools
Festool Cross Stop for repeat hole spacing between 100 and 205 mm Connects to both DF 500 and DF 700 Domino Machines
Mobile dust extractor from Festool AUTOCLEAN automatic main filter cleaning system with infinitely adjustable cleaning intervals Approved for dust category L Antistatic function prevents static developing during work Constantly high suction because of the compact high performance turbine Attachment of Systainers via Sys-Dock Hose garage and cable windup for greater tidiness and safety Economical because of the optimal use of the available volume with a SELFCLEAN filter bag in the container For dust with limit values > 1 mg/m³ Flexible and clean in the workshop and at the construction site thanks to a compact design and a container volume of 26 litres Integral automatic electronic switch-on/shut-off for extraction from electric power tools Suitable for both wet and dry extraction Power consumption350-1200 W Airflow max.3900 l/min Max. vacuum24000 Pa Filter surface area6318 cm² Rubber-insulated mains cable7,5 m Container/Filter bag capacity26/24 l Dimensions (L x W x H)630 x 365 x 540 mm Max. appliance socket connected load2400 W Weight13,9 kg SELFCLEAN filter bag suction hose Ø 27 mm x 3,5 m-AS hose holder Sys dock cable holder
Festool Depth Stop FastFix For precise screw connections with uniform screw depths. Excellent for drywall screws in plasterboard.
Maximum stability of joints up to a dowel size of 14 x 140 mm Patented routing principle unique to hand-held machines for accurate work with no kickbacks Saves more time compared to a stationary machine Stops that are quick and easy to adjust, for accurate results System accessories compatible with both DOMINO jointers Solid wood furniture in frame and tunnel design Frame construction of house doors and interior doors Manufacture of tables and chairs Creation of stable mitre joints Folded and profiled door frames in furniture construction Connection of wide cornices (e.g. plates) Frame and stand constructions in non-supported timber structure (exterior and interior area) Power consumption720 W Idle engine speed 21000 min-1 Depth stop for routing depth 15-70 mm Max. milling depth70 mm DOMINO slot cutter Ø8, 10, 12, 14 mm Routing height adjustment 10-50 mm Mitre routing 0-90 ° Connection Ø d/e27 mm Weight 5,2 kg DOMINO cutter D 12 support bracket 2x dowel box operation tool carry case
4.5mm adustable countersink drill bit with a free spinning depth stop for use with the Centrotec system. The Centrotec shank can be used with all three-jaw chucks for no-slip performance or in conjunction with Festool's Centrotec chuck system. With the Centrotec design there is a better transfer of force with no chance for bit slippage or marring of the drill bit. For drilling and countersinking in a single work step Adjustable depth stop
Precision, wear-free electronic switch-off function for accurate insertion depths and a long service life Energy-saving function for machine start/stop without actuating the main switch Robust, brushless EC motor for maximum efficiency and durability Rapid change to magazine attachment without using tools Lithium ion battery for a greater fastening capacity per battery charge The cordless specialist for classic drywall work High speeds for series screw connections with maximum efficiency Fastening gypsum plaster boards to metal and wooden substructures Battery voltage18 V Gears 1 Idle engine speed Max. torque, wood/steel5/14 Nm Tool reception 1/4" Li-Ion battery capacity 4,2 Ah Weight with depth stop 1,9 kg Weight with magazine attachment2,1 kg TCL 3 charger magazine attachment depth stop belt clip scaffolding holder magnetic bit holder 2 bit PH2, long spare battery pack including rubber frame carry case
Low weight and perfectly balanced for non-tiring work Festool Planer comes with Compact design, ergonomic handle, low operating noise Spiral blade for a smooth planing pattern Efficient dust extraction at the left/right side no clean-up needed Trimming work Assembly work Planing carcasses, trim, skirting, infill panels, doors, etc. Applications where convenient one-handed operation is required
For securing the guide rail in place; is inserted in the lower groove Secure attachment with the MFT 3 The form of the clamp is matched to the guide rail groove and the profile of the MFT and the PRECISIO solid steel version
For clean and splinter-free cross cuts in solid wood as well as for coated or veneered panels The teeth on this blade slope to the left and right and cut alternately. The alternate top bevel blade is an all-purpose blade for all types of wood. Diameter160 mm Cutting width2,2 mm Hole Ø20 mm No. of teeth48 Chip angle5 ° Tooth shapeW
Extra stable blade, particularly well suited for straight cuts when using the guide rail cross-set teeth, conically ground for quick cuts in exact angles Length of cutting blade 75 mm Pitch 4 mm Maximum workpiece thickness 55 mm qty. in pack 5 piece(s)
Compact and lightweight: These features make the CT MIDI mobile dust extractor the ideal companion for assembly, installation and renovation work. For work with power tools or for final cleaning when extracting dust or water. Approved for dust category L Very compact and lightweight Antistatic function prevents static developing during work Practical store for hose and mains cable Hose storage for greater order and safety Attachment of Systainers via Sys-Dock Storage compartment for replacement filter bag Economical, thanks to optimal utilisation of the filter bag in the container For dust with limit values > 1 mg/m³ Ideal for assembly work Integral automatic electronic switch-on/shut-off for extraction from electric power tools For sanding, milling and sawing work that generates medium quantities of dust Suitable for both wet and dry extraction Ideal for final clean-up Power consumption400-1200 W Airflow max.3700 l/min Max. vacuum 24000 Pa Filter surface area5000 cm² Rubber-insulated mains cable7,5 m Container/Filter bag capacity15/12,5 l Dimensions (L x W x H)430 x 330 x 470 mm Max. appliance socket connected load2400 W Weight9 kg fitted filter bag suction hose, Ø 27/32 x 3.5 m AS with rotating angle adapter at extractor side hose holder Sys- Dock with T-LOC function
Top power development and fully variable speed for hard materials and increased material thicknesses Ergonomic working because of the side stop that can be shifted by 30° Tool-free copying ring and base-runner change Fast, convenient router-bit change with rocker and ratchet principle Detachable base plate for fast profile cutter adjustment Dual guide column clamp for extra torsional rigidity and greater precision Simple and exact routing depth setting to 1/10 mm Dust extraction of up to 99 % during edge routing through adjustable extraction ring and chip catcher Rabbeting, grooving and profiling Routing large cutouts, circles and arcs with the MFS routing template Creating worktop corner joints with the worktop template Routing seals and espagnolettes in windows and doors Stationary routing of up to Ø 60 mm with the TF 2200 table router Power consumption2200 W Idle engine speed 10000-22000 min-1 Collet Ø6-12,7 mm Routing depth adjustment range80 mm Fine height adjustment range20 mm Max. cutter diameter89 mm Connection Ø d/e36/27 mm Weight7,8 kg Ø 1/4" clamping collet (6.35 mm) Ø 1/2" clamping collet (12.7 mm) copying ring Ø 30 mm chip deflector operation tool carry case
Powerful 400-watt motor with electronic speed adjustment switch for consistently fast working progress Ergonomic: slimline housing with rubber-coated handle rests perfectly in the hand, the switches are located in the best position Greater accuracy with the depth stop: simple adjustment without using tools. Accurate sawing along the scribe mark with the positioning aid. Ideal for cutouts in delicate materials Flexible operation, short set-up times: the VECTURO with plug-it cable is ready to use straightaway. Blades and accessories are replaced without using tools Organisation for every occasion: saw blades, scrapers and accessory parts can be stored tidily in the SYSTAINER, right at your fingertips Perfect in a system: universal bi-metal saw blades, special saw blades for GRP materials and non-ferrous metals, scrapers for removing adhesive and silicone Notches, cutouts and plunge cuts in plasterboard, wood, composite materials, coated materials, also in awkward spots Removal of window glass, silicone, adhesive, bonding materials and window putty Cutting all kinds of skirting board, beams and profiles to length as well as door frames and pipes Sawing GRP and non-ferrous metals Power consumption400 W Power output 220 W Vibrations11.000-18.500 min-1 Amplitude2 ° Cable length4 m Weight 1,55 kg wood saw blade HSB 50/35/J wood saw blade HSB 100/HSC universal saw blade USB 78/32/Bi positioning aid/depth stop set OS-AH/TA Set carry case
Centrotec Phillips bit 2-100 mm. Long shaft Centrotec Phillips bits with precision milled shaft and durable Zirconium Nitride (ZrN) coating. Also compatible with standard or keyless chucks. With a zirconium duplex coating for a better grip and longer service life Save time changing between drill and screw bits with the quick-change Centrotec System Reduce fatigue with the lightweight Centrotec chuck and decrease drilling/driving clearance with the compact design Centrotec bits extend directly into the drill spindle so they serve as an extension of the motor, significantly improving controllability and torque Zirconium Nitride (ZrN) coating provides excellent erosion resistance, good lubricity and ductility Precision milled shaft provides zero run-out
The Festool HiQ PZ 1-100 CE/2 Pozidriv screwdriver bit from Kelvin Power Tools offers robust and powerful results when scrwdriving. The bit is coated in 2 layers of zinc which enables a stronger hold on the screw and makes the bit twice as durable. With a zirconium duplex coating for a better grip and longer service life
Thanks to the FastFix interface the QUADRIVE PDC can be converted from drill to angle drill and from drill/driver to angle drill/driver without using any tools. Brushless EC-TEC motor for maximum service life and huge degree of efficiency, combined with lithium-ion battery for up to 100% more power 4-gear transmission with up to 3,800 rpm for fast drilling LED lighting which can be switched on separately and battery charging status display The universal solution for high-torque screwdriving and drilling operations with larger diameters Connectible axial impact for the PDC for drilling in brickwork With connectible axial impact possible to drill in masonry/stone up to 10 mm Up to 60 Nm torque for maximum screws 10x300 mm Bore holes up to 50 mm with Zobo drills Screwdriving and drilling in narrow places with optional angle attachment Thanks to FastFix interface can be retrofitted in an instant to become a powerful screwdriver or construction site screwdriver Battery voltage18 V Capacity4.2 Ah Gears 4-gear Max. speed (no load)0 - 3,800 rpm Impact count 0 - 76,000 rpm Torque, hard/soft conditions60/40 Nm Drill chuck range1.5 - 13 m Tool holderFastFix Weight with CENTROTEC, incl. Battery1.8 kg TCL 3 charger CENTROTEC tool chuck CENTROTEC bit holder bit PZ 2 FastFix keyless chuck 13 mm additional side-mounted hand grip 2nd battery pack lithium-ion 4.2 Ah incl. rubberised frame carry case
Festool Spare Felt spare felt for StickFix baseplate 'Festool Base Runner Sensitive Surface'
Festool Splinter Guard for low-splinter cuts to the right of the saw blade can be used with or without guide rail
200 mm cutting depth and 6.5 kg weight Integrated guide slot in the aluminium die cast base plate for accurate cuts using the guide rail Wide application range for mitre cuts up to 60° Chain changed and tensioned without using tools Rotary dust-extraction attachment for connecting an extractor Drawing cut for rapid, jolt-free operation and an outstanding cutting quality Efficient electronics for constant pressure during sawing Different chain cutters for a wide range of cuts Cutting pressure-resistant insulating materials such as wooden fibreboards, PUR, polystyrene, etc. Chop, mitre, rip and jack-rafter cuts in wood. Power consumption1600 W Cutting depth 0°/90°/45°/60° mm 200/140/100 mm Mitre cutting 0-60 ° Idle engine speed4600 min-1 Chain speed10,6 m/s Blade position0-10 ° Weight 6,5 kg universal saw chain SC 3/8" 91 U-39E chain oil 250 ml 7.5 m power cord carry case
The Festool TCT saw blade is an extremely powerful TCT blade that features crosscut technology for accurate and neat cuts. For all types of wood, building panel, soft plastic For faster cutting with less force, particularly rip cutting Suitable for tool types: for TS 55, ATF 55, AP 55
Festool Torx Bit With a zirconium duplex coating for a better grip and longer service life
Festool Trim Stop For strip material between 22 (7/8") and 70 (2-3/4")mm in width. Perfect for cutting mortises in the end of narrow material such as in face frame construction. For use on the Festool Domino.
Slimline housing for maximum flexibility and close proximity to the wall (12 mm) Angle adjustment with undercut function from -1 to 47° Guide wedge for safer work and simple positioning in existing joint Transparent sliding viewing window provides a good view of the scribe mark and saw blade Precise circular in materials up to 55 mm thick Cutting interior doors to length using guide rail and circular saw Manufacturing expansion joints in parquet flooring and false joints Cutting chipboard to size Cutting and processing plasterboard Power consumption1200 W Idle engine speed2000-5200 min-1 Saw blade diameter 160 mm Angular range-1-47 ° Cutting depth0-55 mm Cutting depth at 45 degrees0-43 mm Connection Ø d/e27/36 mm Weight4,5 kg fine tooth saw blade HW W48 guide rail FS 1400/2 splinterguard Flag window; vision panel operation tool carry case
Sawing with a guide rail; most power tool companies offer guide rail systems. Festool were the first when they invented the guide rail over 40 years ago and are still setting new standards especially with the plunge-cut saws. Put the two together and they are representative of a unique cutting system. Supplied with: Guide Rail 1400mm, TCT saw blade 36 tooth, Set-back stop, splinterguard and Systainer case. When joining rails together you will require joining bars these are not supplied with the rails, two bars are recommended to join two rails for extra stability. FastFix saw blade change system for quick and easy saw blade changing One of the best plunge cut saws available Attachable splinterguard for splinter-free cuts on both sides Toolless play adjustment on the guide rail Precise depth adjustment in increments of 1mm SSB rapid safety brake with electronic system for safe working Guide Rail FS 1400/2 HW universal saw blade Z 36 Set-back stop Splinterguard ModelTS75EBQ-PLUS-FSB Max Depth of Cut @ 45°54mm Max Depth of Cut @ 90°75mm Nett Weight6.2kg Power1,600W RatingIndustrial Speed1,350-3,550rpm Spindle LockYes Blade Dia/Bore210mm/30mm
Universal saw blade 160mm x 2.2mm x 20mm With alternating teeth and a medium chip angle, this saw blade is suitable for both rip cuts and cross cuts