Esab Products

Below are our Esab products. You can click on each product to view a full description and specification.

Sorting products...Sorting products...

Cleanweld Anti Spatter Pressure Spray 600ml

Cleanweld Anti Spatter Pressure Spray 600ml

A lower cost high value option for lighter welding applications. Dichloromethane-free 270° valve. Compressed air. Outperforms by far and lasts at least 3x as long as conventional anti-spatter aerosols.

Price:£5.75£6.90

Esab 0349 495 784 Wire Basket Reel Adaptor

Esab 0349 495 784 Wire Basket Reel Adaptor

Adapts 22-30 lb. (10-14 kg) Lincoln Readi-Reels of electrode to 2 (51mm) spindle. Wire Basket Reel Adaptor

Price:£5.95£7.14

Esab 0366-549-886 Steel Liner 1.2mm

Esab 0366-549-886 Steel Liner 1.2mm

Steel Liner for MIG 400T torch Steel Liner 1.2mm 3 metres

Price:£20.50£24.60

Esab 0366-550-888 Steel Liner 1.4mm

Esab 0366-550-888 Steel Liner 1.4mm

Steel Liner for MIG 400T torch Steel Liner 1.4mm 3 metres

Price:£36.04£43.25

Esab 0700-200-091 Teflon Liner

Esab 0700-200-091 Teflon Liner

Telfon Liner for Esab Caddymig 200 Teflon Liner 3 metres

Price:£16.95£20.34

Esab 0700-200-181 Teflon Liner 1.2mm

Esab 0700-200-181 Teflon Liner 1.2mm

Telfon Liner for push pull torch for PP400 Gun 8 Metre Teflon Liner 1.2mm 3 metres

Price:£34.50£41.40

Esab 316 Grade Flux Cored Wire 1.2mm x 15.0kg

Esab 316 Grade Flux Cored Wire 1.2mm x 15.0kg

Stainless 316 Grade Flux Cored Wire

Price:£285.00£342.00

Esab 6689 Eyetech II Cover Lens (5)

Esab 6689 Eyetech II Cover Lens (5)

Inner protective lens for Esab Eyetech II range Inner protective cover lenses Protects sensitive electronic LCD cartridge To fit ESAB Eyetech 2 Welding Helmet Sold in packs of 5

Price:£19.30£23.16

Esab 7017 Eyetech Cover Lens 113x92 (10)

Esab 7017 Eyetech Cover Lens 113x92 (10)

Outer protective lens for Esab Eyetech range Outer protective cover lenses Protects sensitive electronic LCD cartridge To fit ESAB Eyetech Welding Helmet Sold in packs of 10

Price:£20.50£24.60

Esab Albatross 2000 Welding lens DIN 2

Esab Albatross 2000 Welding lens DIN 2

Welding lens 110mm x 90mm Shade 2 Part number 0160 307 005

Price:£6.50£7.80

Esab Albatross Outer Clear Weld Lens 2190mm x 95mm (Pack of 5)

Esab Albatross Outer Clear Weld Lens  2190mm x 95mm (Pack of 5)

Outer Clear Weld Lens 2190mm x 95mm Part number 0349 501 082

Price:£42.75£51.30

Esab Albatross Welding lens DIN 10 (5)

Esab Albatross Welding lens DIN 10 (5)

Welding lens 110mm x 90mm Pack of 5 Shade 10 Part number 0760 031 632

Price:£4.95£5.94

ESAB Anti Spatter Nozzle Dip Gel

ESAB Anti Spatter Nozzle Dip Gel

Can dip hot or cold, gel will not migrate into liner Physical Form - Gel Type - Heavy Duty Nozzle Dip Capacity Vol. - 1 qt Packing Type - Can Applications - Welding

Price:£4.95£5.94

ESAB Anti-Spatter Spray

ESAB Anti-Spatter Spray

Up to 3 times the life of aerosols with no noxious fumesand no harmful solvents. Propelled by compresses air with a constant 360 degrees spray reduces heat dicolouration and contains a corrosion inhibitor. 450g Silicone Free - Solvent Based

Price:£3.20£3.84

Esab Aristo Tech Welding Helmet

Esab Aristo Tech Welding Helmet

Designed for the professional welder who wants the best in protection and performance The lightweight shell and ergonomically deigned headgear offers maximum comfort and protection when welding for long periods of time. With the latest in digital lens technology, with internal LCD display, the welder has full control to adjust the shade level, sensitivity and delay settings with precision for any welding application. Available in 3 high gloss colours - yellow, black & white Helmet weighs only 490g Variable 5-13 digital control for adjustment of shade level, sensitivity and delay Optical class 1/1/1 Quickset TM allows an easy change of shade by a simple up and down flick of the switch Grind mode activated at lowest sensitiviy Suitable for all manual welding processes including plasma cutting Conforms to CE, ANSI AS/NZS, CSA

Price:£160.00£192.00

Esab Autorod 13.91 Hard Facing Wire

Esab Autorod 13.91 Hard Facing Wire

Esab Autorod 13.91 Hard Facing Wire 1.0mm x 15kg 1.2mm x 15kg

Price:£250.45£300.54

Esab Autorod 5183 1.2mm x 7kg

Esab Autorod 5183 1.2mm x 7kg

OK Autrod 5183 is designed to provide the highest possible strength in the as-welded condition of alloy AA 5083 and similar high-magnesium alloys. The more common OK Autrod 5356 typically fails to meet the as-welded tensile requirements of AA 5083. The alloy is typically used in marine and structural applications where high strength, high fracture toughness for impact resistance and exposure to corrosive elements are important. The alloy is not recommended for elevated temperature applications due to its susceptibility to stress corrosion cracking. The alloy is non-heat treatable.

Price:£51.25£61.50

Esab Autrod 4043 7.0Kg

Esab Autrod 4043 7.0Kg

OK Autrod 4043 is one of the most widely used welding and brazing alloys and can be classified as a general-purpose filler alloy. The silicon addition results in improved fluidity (wetting action), making the alloy the preferred choice of welders. The alloy is not sensitive to weld cracking and produces bright, almost smut-free welds. Not recommended for anodising. Non-heat treatable. Welding current: DC(+)

Price:£41.50£49.80

Esab Buddy Arc 145

Esab Buddy Arc 145

The Buddy Arc 145 is a robust and durable power source for the professional welder. The machine provides state of the art welding performance and reliabilty through use of the latest high grade IGBT technology. Welds most standard electrodes from 1.6 - 3.2mm Easy to use - set the welding current and weld with excellent results Practical design 230V 50/60Hz Setting range MMA (DC), A - 0 - 145

Price:£195.00£234.00

Esab Buddy Arc 180

Esab Buddy Arc 180

The Buddy Arc 180 is a robust and durable 180Amp arc welding power source for the professional welder. The machine provides state of the art welding performance and reliability through use of the latest high grade IGBT technology. Superior arc characteristics - Smooth welding conditions Generator compliant - Suitable for use with generators Easy to use - Set the welding current and weld with excellent results Practical design - makes the power source easy to carry which enables use on any work site Robust design - withstands harsh environments Can be used with extended mains cable - provides extended work range

Price:£225.00£270.00

Esab Buddy Tig 160

Esab Buddy Tig 160

The Buddy Tig 160 is a robust and durable power source for the professional welder. The machine provides state of the art welding performance and reliabilty through use of the latest high grade IGBT technology. The Buddy™ Tig 160 is a user friendly, robust and still lightweight TIG machine, offering HF start and a stick (MMA) mode. The internal electronics are cooled by a highly efficient fan for added reliability and monitored by a thermal protection system. The machine has been equipped with three heat sinks which further extending the life time of the product. The casing has been designed to withstand harsh environments and is rated to IP 23S standard. The machine incorporates both a shoulder strap and a robust carry handle. The Buddy™ Tig 160 provides superior TIG welding with smooth arc characteristics. The HF arc start prevents contamination of the weld material and electrode. The built in gas valve automatically controls the gas flow ensuring a low gas consumption. The operator can chose between 2 stroke and 4 stroke torch trigger mode. The machine can weld mild steel or stainless steel with or without filler material. The Buddy™ Tig 160 provides a smooth DC (Direct Current) welding power which allows you to weld most metals such as alloyed and non alloyed steel, stainless steel and cast iron. The arc force and hot start settings are adjusted automatically according to the set welding current giving excellent arc starts and welding performance across the amperage range of the machine. The Buddy™ Tig 160 can weld most electrodes from 01.6-3.2 mm. The control panel on the Buddy™ Tig 160 is very easy to use with one adjustment knob to set the weld current and one to set the slope down time in TIG mode or the arc force in MMA mode.

Price:£395.00£474.00

Esab Caddy Mig C160i 160amp 240v Invertor Mig

Esab Caddy Mig C160i 160amp 240v Invertor Mig

Applications The performance of this unit makes it a superb choice for mild steel welding applications. Perfect for tradesmen working with repair, maintenance or assembly work in the workshop, outdoors or at different sites. Single phase mains connection makes it easy to find a electricity supply. Works equally as well when powered by a portable generator.* The Caddy Mig C160i has optimized per-formance for welding with 0.8 mm wire on mild steels using solid or cored wires. Automatic function and simplicity With Caddy Mig C160i you only need to set the plate thickness before starting to weld. Hotter or colder welds can easily be obtained by using the heat adjustment knob. More welding power than ever before The PFC (power factor correction) gives 30 % more welding power from the same fuse size. Description Caddy Mig C160i has an efficient built-in inverter power source. Inside the side panel there is a wire feeder as well as space for the wire spool. Easy to use - Set material thickness and start welding The low weight and small size makes it easy to get to the worksite, indoors or outdoors. Has PFC (power factor correction) and complies to European "Harmonics" demands = uses energy efficiently Polarity change = possibility to use gasless cored wire Fitted with ESAB high quality MXL180 torch, 3 m long Optimized for 0.8mm mild steel wires Mains voltage, V/Ph Hz 230 1ph 50/60 +-15% Fuse (slow), A 16 Auto fuse (MCB) EN 60898 type B 16 Mains cable, Ø mm 1.5 Maximum welding output 160 Amps Permitted load, at 40oC 35% duty cycle, A/V 150/20.5 100% duty cycle, A/V 100/19 Setting range, A 30-160 Open circuit voltage, V 60 Wire feed speed, m/min 2 – 11 Max. size of the wire reel, mm (kg) 200 (5) Open circuit power, W 15 Power factor at maximum current 0.99 Efficiency at maximum current, % 82% Dimensions lxwxh, mm 449x198x347 Weight with torch & cables, kg 11.4 Enclosure class IP23C Application class S Standards IEC/EN 60974-1, EN 60974-05, EN 60974-10 Operating temperature, °C -10 to +40

Price:£715.00£858.00

Esab Caddy Mig C200i 200amp 240v Invertor Mig

Esab Caddy Mig C200i 200amp 240v Invertor Mig

Portable Mig/Mag welding unit with built-in wire feeder for 200 mm spools. For tradesmen – repair, maintenance and assembly welding of mild steels, aluminium and stainless steels as well as brazing. This easy to use, intelligent and powerful unit, offers excellent welding properties and is easy to take along to the job at hand. Delivery includes 3 m torch, 3 m mains cable with plug. 4.5 m gas hose with hose clamp and quick connector, return cable with clamp, simple shoulder strap, fitted wear parts in torch/feeder (for 0.8 mm wire) and instruction manual. 1 kg OK Autrod 12.51, Ø0.8 mm welding wire is also included. Can weld mild & stainless steels, aluminium, as well as MIG/MAG brazing QSet™, intelligent arc setting, ensures consistent quality and makes it easy to use Has PFC (power factor correction) and complies to European Harmonics demands = uses energy efficiently – lots of power. Easy to change polarity = possibility to use gasless cored wire Fitted with ESAB, high quality, MXL180 torch, 3 m long Mains voltage, V/Ph Hz 230 +-15% / 1ph 50/60 Fuse (slow), A 16 Auto fuse (MCB) EN 60898 type B 20 Mains cable, Ø mm² 1.5 Maximum welding output, A 200 Permitted load at 25% duty cycle, A/V 180 /23 100% duty cycle, A/V 100/19 Power factor at maximum current 0,99 Efficiency at maximum current, % 82 Setting range, A 30-200 Open circuit voltage, V 60 Wire feed speed, m/min 2 – 12 Max. size of the wire reel, mm (kg) 200 (5) Open circuit power, W 15 Dimensions lxwxh, mm 449x198x347 Weight with torch & cables, kg 11.5 Enclosure class IP23C Application class S Standards IEC/EN 60974-1, 60974-5 EN 60974-10 Operating temperature, °C -10 to +40

Price:£950.00£1,140.00

Esab CaddyArc 151i

Esab CaddyArc 151i

Compact and portable inverter for MMA and TIG welding with electronically controlled LiveTig™ start. Includes Free Automatic Welding Mask Durable and impact resistant design with OKC 50 cable connectors. Easy to operate. Digital display for settings. Adjustable hot-start and arc force for accurate weld setting. ArcPlus™ II regulator for better welding characteristics. Higher weld quality with less after treatment. Two memories for storing of settings. Remote control possibility Can operate with extra long mains cables, over 100 m, thanks to the built in PFC circuit. Caddy Arc 151i welds most electrodes from Ø 1,6 - 3,2 mm and some 4 mm electrodes. IP 23 - designed for outdoor use making it safe on Delivery includes 3 m of mains cable with plug External dimensions, LxWxH418 x 188 x 208mm Weight, 7.9kg Enclosure class, protection IP 23 Mains supply, V/Hz 230/1 50/60 Fuse, slow, A 16 Max output at 25% duty cycle A 150/26 (MMA), 150/16 (TIG) Max output at 60% duty cycle A 100/24 (MMA), 120/14,8 (TIG) Max output at 100% duty cycle A,90/23,6 (MMA), 110/14,4 (TIG) Open circuit voltage, V 72 Power factor at max current 0,99 Efficiency at max current 80 Current range TIG DC, A 3 - 150 Current range MMA DC, A 4 - 170

Price:£545.00£654.00

Esab CaddyTig 1500i

Esab CaddyTig 1500i

Compact and portable inverter for advanced TIG welding, with HF or LiftArc™ start, and MMA. Includes Free Packet of Tig Wire and Gloves Durable and impact resistant design with OKC 50 cable connectors. Easy to operate. Graphical parameter setting for advanced TIG welding. Digital display for settings. Remote control possibility. Two memories for storing of settings. Adjustable slope up/down and gas post-flow. ArcPlus™ II regulator for better MMA welding characteristics. Higher weld quality with less after treatment. Caddy Tig 1500i welds most electrodes from Ø 1,6 - 3,2 mm and some 4 mm electrodes. Can operate with extra long mains cables, over 100 m, thanks to the built in PFC circuit. IP 23 - designed for outdoor use making it safe on all work sites Delivery includes 3 m mains cable with plug, 2 m gas hose and two hose clamps. External dimensions, LxWxH, mm 418 x 188 x 208 Weight, kg 9,2 Enclosure class, protection IP 23 Mains supply, V/Hz 230/1 50/60 Fuse, slow, A 16 Max output at 25% duty cycle, A 150/16 (TIG) Max output at 60% duty cycle, A 120/14,8 (TIG) Max output at 100% duty cycle, A 110/14,4 (TIG) Open circuit voltage, V 72 Power factor at max current 0,98 Efficiency at max current 77 TIG, 80 MMA Current range TIG DC, A 3 - 150 Current range MMA DC, A 4 - 170

Price:£1,175.00£1,410.00

Esab CaddyTig 2200i AC/DC

Esab CaddyTig 2200i AC/DC

Compact and portable inverter for advanced TIG welding, with HF or LiftArc™ start, and MMA. Durable and impact resistant design with OKC 50 cable connectors. Easy to operate. Graphical parameter setting for advanced TIG welding. Digital display for settings. Remote control possibility. Pulsed TIG giving increased control of heat input and weld pool. Two memories for storing of settings. Micro Pulse minimising heat affected zone especially on thin material. Adjustable slope up/down and gas post-flow. ArcPlus™ II regulator for better MMA welding characteristics. Higher weld quality with less after treatment. Caddy Tig 2200i welds most electrodes from Ø 1,6 - 4 mm. Can operate with extra long mains cables, over 100 m, thanks to the built in PFC circuit. IP 23 - designed for outdoor use making it safe on all work sites Delivery includes 3 m mains cable with plug, 2 m gas hose and two hose clamps. External dimensions, LxWxH, mm 418 x 188 x 208 Weight, kg 9,4 Enclosure class, protection IP 23 Mains supply, V/Hz 230/1 50/60 Fuse, slow, A 16 Max output at 25% duty cycle, A 220/18,8 (TIG) Max output at 60% duty cycle, A 150/16,0 (TIG) Max output at 100% duty cycle, A 110/14,4 (TIG) Open circuit voltage, V 72 Power factor at max current 0,99 Efficiency at max current 75 TIG, 81 MMA Current range TIG DC, A 3 - 220 Current range MMA DC, A 4 - 150

Price:£1,850.00£2,220.00

Esab CaddyTig 2200i DC Tig Invertor TA33 Non Pulse Panel

Esab CaddyTig 2200i DC Tig Invertor TA33 Non Pulse Panel

Compact and portable inverter for advanced TIG welding, with HF or LiftArc™ start, and MMA. Durable and impact resistant design with OKC 50 cable connectors. Easy to operate. Graphical parameter setting for advanced TIG welding. Digital display for settings. Remote control possibility. Pulsed TIG giving increased control of heat input and weld pool. Two memories for storing of settings. Micro Pulse minimising heat affected zone especially on thin material. Adjustable slope up/down and gas post-flow. ArcPlus™ II regulator for better MMA welding characteristics. Higher weld quality with less after treatment. Caddy Tig 2200i welds most electrodes from Ø 1,6 - 4 mm. Can operate with extra long mains cables, over 100 m, thanks to the built in PFC circuit. IP 23 - designed for outdoor use making it safe on all work sites Delivery includes 3 m mains cable with plug, 2 m gas hose and two hose clamps. External dimensions, LxWxH, mm 418 x 188 x 208 Weight, kg 9,4 Enclosure class, protection IP 23 Mains supply, V/Hz 230/1 50/60 Fuse, slow, A 16 Max output at 25% duty cycle, A 220/18,8 (TIG) Max output at 60% duty cycle, A 150/16,0 (TIG) Max output at 100% duty cycle, A 110/14,4 (TIG) Open circuit voltage, V 72 Power factor at max current 0,99 Efficiency at max current 75 TIG, 81 MMA Current range TIG DC, A 3 - 220 Current range MMA DC, A 4 - 150

Price:£1,325.00£1,590.00

Esab Contact Tip

Esab Contact Tip

Esab Contact Tip High quality and durable

Price:£4.95£5.94

Esab Contact Tip 1.2mm

Esab Contact Tip 1.2mm

Contact Tip 1.2mm

Price:£4.95£5.94

Esab Contact Tip 1.4mm x M6

Esab Contact Tip 1.4mm x M6

Esab Contact Tip for Esab Origomig 400 High quality and durable

Price:£21.50£25.80

Esab Contact Tip 1.4mm x M8

Esab Contact Tip 1.4mm x M8

Esab Contact Tip for Esab Origomig 400 High quality and durable

Price:£39.30£47.16

Esab CoreShield 15 - Self Shielding Flux Cored 0.8mm x 4.5kg

Esab CoreShield 15 - Self Shielding Flux Cored 0.8mm x 4.5kg

A cored wire that builds a slag protection and therefore needs no gas to weld a large variety of mild steels. Diameter 0.8 mm, for welding mild steels. Change polarity for best result.

Price:£43.95£52.74

ESAB Curved MIG Glove

ESAB Curved MIG Glove

These superior new welding gloves from ESAB offer a whole new approach to fit, form and function. Ergonomicaly designed to fit the natural curve of the hand, offering increased quality & comfort to the wearer. The MIG glove is made from heavy & fine cut leather, and is lined from hand to cuff. With the curved design the glove fits the hand perfectly, and also has a flexible wrist area which reduces friction. With welted seams, kevlar stitching & reinforced thumb, the glove is very strong and offers a very high level of protection to the wearer Thin high quality hide front and back Improved fit for higher dexterity Strong ergonomic design Angled thumb for natural grasp High abrasion resistant Flexible wrist area with less friction Welted seams with kelvar stitching Extremely lightweight

Price:£13.75£16.50

Esab Curved Tig Glove

Esab Curved Tig Glove

Ergonomicaly designed to fit the natural curve of the hand, offering increased quality & comfort to the wearer Made from thin high quality leather, with improved fit for higher dexterity Highly durable, with welted seams & kevlar stitching The glove is also extremely light weight, which increases the comfort to the wearer

Price:£9.45£11.34

Esab Eco Safety Spectacles

Esab Eco Safety Spectacles

Great quality spectacles for drilling, chipping and metalworking Sporty Style Extremely lightweight Available in Amber, Clear & Smokey lens CE approved according to EN 166-F

Price:£3.25£3.90

Esab Femax ok 33.80 E7028 Iron Powder High Strength Low Hydrogen Electrodes

Esab Femax ok 33.80 E7028 Iron Powder High Strength Low Hydrogen Electrodes

High-recovery rutile electrode for the high productivity welding of fillets in the horizontal-vertical position. Particularly suitable for welding thick plates and for long run-out lengths. Good bead appearance. Easy slag removal. Welding current: AC, DC(+ -) OCV 50V Available in: 3.2mm x 6.2Kg 4.0mm x 5.9Kg

Price:£27.38£32.86

ESAB Filtair Flat A-3V Pk 20

ESAB Filtair Flat A-3V Pk 20

This mask provides P3 protection and is equipped with a valve to reduce heat and moisture build up inside the respirator. Suitable to wear during molten metal handling, welding, machining, grinding, polishing and finishing. Sold in packets of 20

Price:£45.46£54.55

ESAB Filtair Pro 8010 Pk20

ESAB Filtair Pro 8010 Pk20

This mask provide P1 protection and is suitable to wear during general dusty duties. Sold in packets of 20

Price:£17.21£20.65

ESAB Filtair Pro 8020CV Pk 5

ESAB Filtair Pro 8020CV Pk 5

This mask provide P2 protection and is equipped with a valve to reduce heat and moisture build up inside the respirator. The carbon layer takes out bad odours. Suitable to wear during welding, brazing, soldering, painting (brush applied), gluing (brush applied) and polyester resins (hand mix). P2 Protection Sold in packets of 5

Price:£13.95£16.74

ESAB Filtair Pro 8020V Pk10

ESAB Filtair Pro 8020V Pk10

This mask provide P2 protection and is equipped with a valve to reduce heat and moisture build up inside the respirator. Suitable to wear when sanding painted metals, powder coating and sanding cured resins. Sold in packets of 10

Price:£16.69£20.03

ESAB Filtair Pro 8030V Pk 5

ESAB Filtair Pro 8030V Pk 5

This mask provide P3 protection and is equipped with a valve to reduce heat and moisture build up inside the respirator Suitable to wear during molten metal handling, welding, machining, grinding, polishing and finishing. Sold in packets of 5

Price:£16.75£20.10

Esab Flip Front Goggle 4 x 2 Shade 5

Esab Flip Front Goggle 4 x 2 Shade 5

A one piece goggle with a soft moulded body, indirect ventilation and a 108 x 51mm (4 1/4” x 2) lens aperture. Fitted with a shade 5 filter and will fit over prescription spectacles

Price:£3.95£4.74

ESAB Flip Front Goggle Round Shade 5

ESAB Flip Front Goggle Round Shade 5

Protective goggle shade 5 for gas welding, brazing and gas cutting. The goggles are ventilated and have a flip-front mechanism. CE approved according EN 166/EN 175 50mm round Lens

Price:£4.95£5.94

Esab G3Si MIG Welding Wire

Esab G3Si MIG Welding Wire

ESAB copper coated, precision layer wound, G3Si1/ER70S-6 solid wire for MIG/MAG welding of all general structural and engineering unalloyed and low-alloyed carbon-manganese steels, pressure vessel fabrication and shipbuilding. An ideal alternative for people requiring good quality at a budget price. Suitable for use with either an Argon/CO2 gas mixture or with pure CO2 as the shielding gas. Supplied on easily disposable, recyclable, adaptorless 15 kilo wire baskets. Shielding Gas: M21, C1 (EN ISO 14175) Alloy Type: Carbon-manganese steel (Mn/Si-alloyed)

Price:£15.75£18.90

Esab Globe Arc Flip-Up Lens

Esab Globe Arc Flip-Up Lens

The Globe-Arc is the latest design in flip up welding and grinding helmets. The visor provides effective protection from UV and IR radiation when visor is open and closed. Main Clear Visor 1.8mm Thick Available in clear: UVIR 2, UVIR 3 & UVIR 5 B Impact Rating EN 166 – Approved for Grinding Allows visible light to go through when welding, but blocks harmful UV-radiation (No Red-Eye Effect). Helmet can be used for heavy-duty welding with high amps

Price:£39.95£47.94

ESAB Gold Welders Gauntlets

ESAB Gold Welders Gauntlets

A welding glove made of hard-wearing, heat-resistant cow-split leather 1.3mm thick. Reinforced wing thumb fully welted KEVLAR stitched. CE approved. Cat. 2.

Price:£3.71£4.45

ESAB Heavy Duty Black Gauntlet

ESAB Heavy Duty Black Gauntlet

A welding glove made of black, strong cow-grain leather High dexterity with KEVLAR stitching ensures that the glove can resist hard mechanical stress Fully welted, CE approved. Cat. 2. Tested against mechanical stress such as abrasion, cut, tear and puncture Tested for thermal performance such as exposure to an open flame, contact heat, convective heat, radiant heat, small and large splashes of molten metal

Price:£3.36£4.03

Esab Heavy Duty Worker

Esab Heavy Duty Worker

A hard-wearing work glove made of selected cow-grain leather with a cotton lining for comfort. The rubber-reinforced cuff provides extra protection and the wing thumb is angled. Cat. 2.

Price:£1.60£1.92

ESAB New Tech™ 9-13 ADC Plus

ESAB New Tech™ 9-13 ADC Plus

The New Tech™ 9-13 ADC Plus offers our latest ADC Plus technology which ensures a solid shade level even when viewing the lens at an angle. The cartridge also has improved colour and light contrast allowing the welder to distinguish colours through the lens in an open and activated state. The settings, such as shade level DIN 9-13, sensitivity and delay are made from the outside of the helmet. The New Tech series of auto darkening welding helmets features the latest technology. All four models are very lightweight and well balanced. The head gear can be set to fit each individual and it makes the helmet comfortable to wear. The New Tech helmets offer a bigger viewing area, giving the welder a feeling of increased space. The helmet shell is designed to give maximum protection to the face but also the neck and ears. The area in front of the mouth is made larger ADC Plus Technology - Eye does not need to adjust to different shades. This reduces eye fatigue as well as increasing comfort for any welder. Increased color definition - offers superior color definition in both the open and activated state, allowing the welder to better see the LED displays on machines and equipment, while also identifying heat definition on the actual weld. ADF automatically switches to sleep mode after 10 minutes in darkness New-Tech ™ 9-13 ADC Plus is powered by solar cells - requires no battery changes Black heat reflective shell External grinding mode (New-Tech ™ 6-13 XL ADC Plus only) External adjustable shade External adjustable sensitivity External delay adjustment Offers complete protection of ears, cheeks and neck Helmet shape helps to deflect heat and welding fumes Extremely easy to replace the cover lenses ESAB’s series of New-Tech ™ ADC Plus helmets are ANSI approved.

Price:£475.00£570.00

Esab OK 46.30 E6013 Mild Steel Rods

Esab OK 46.30 E6013 Mild Steel Rods

Esab OK 46.30 is a good quality economical, general purpose rutile welding electrode. Suitable for all welding positions uses include plate and pipe work and general fabrication. Deposits smooth weld beads with easily detachable slag. Available in: 2.5mm x 5.0kg 3.2mm x 5.0kg 4.0mm x 5.0kg 5.0mm x 5.0Kg

Price:£11.00£13.20

Esab ok 61.30 304/308 Grade Stainless Electrodes

Esab ok 61.30 304/308 Grade Stainless Electrodes

Extra-low carbon stainless steel electrode for welding steels of the 19 Cr 10 Ni-type. Also suitable for welding stabilized stainless steels of similar composition, except when full creep resistance of the base material is to be met. Type Acid-rutile Welding current: DC+, AC OCV 50 V Available in: 2.5mm x 0.35kg 3.2mm x 1kg 2.5mm x 0.7kg 3.2mm x 1.7kg

Price:£9.50£11.40

Esab ok 63.30 316 Grade Stainless Electrodes

Esab ok 63.30 316 Grade Stainless Electrodes

Extra low carbon stainless steel electrode for welding steelss of the 18Cr 12Ni 2.8Mo-type. Also suitable for welding of stabilized stainless steels of similar composition, exept when the full creep resistance of the base metal is to be met. Type Acid-rutile Welding current: DC+, AC OCV 50V Available in: 1.5mm x 0.7kg 2.0mm x 0.6kg 2.5mm x 0.7kg 3.2mm x 0.85kg 3.2mm x 1.7kg 4.0mm x 2.5kg

Price:£11.50£13.80

Esab ok 67.60 309 Grade Stainless Electrode

Esab ok 67.60 309 Grade Stainless Electrode

Acid-rutile coated MMA electrode giving an overalloyed weld metal. Suitable for welding stainless steel to mild and low alloyed steels. Also suitable for welding of transition layers when surfacing mild steel with stainless steel weld metal. Type Acid-rutile Welding current: DC+, AC OCV 55V Available in: 2.5mm x 0.85kg 2.5mm x 0.6kg 3.2mm x 1kg 3.2mm x 4.4kg

Price:£12.95£15.54

Esab ok 68.81 Stainless 312 Grade Electrodes

Esab ok 68.81 Stainless 312 Grade Electrodes

Extra low carbon stainless steel electrode for welding steelss of the 18Cr 12Ni 2.8Mo-type. Also suitable for welding of stabilized stainless steels of similar composition, exept when the full creep resistance of the base metal is to be met. Type Acid-rutile Welding current: DC+, AC OCV 50V Available in: 2.5mm x 0.7kg 3.2mm x 0.85kg 3.2mm x 1.7kg

Price:£35.00£42.00

Esab ok 83.50 Hardfacing Rods

Esab ok 83.50 Hardfacing Rods

OK 83.50 is a hardfacing electrode for the repair welding of worn parts on agricultural equipment, forestry tools, loading machines and so on. Transformers with low open-circuit voltage can be used (> 45 volt). Length, mm: 350 Arc voltage, V: 30 Welding current, A: 90-160 N. Kg weld metal/kg electrodes: 0,46 B. No. of electrodes/kg weld metal: 52 H. Kg weld metal/hour arc time: 1,2 T. Burn-off time, s/electrode: 59

Price:£26.75£32.10

Esab ok 84.58 Hardfacing Rods (600 Rockwell Hardness)

Esab ok 84.58 Hardfacing Rods (600 Rockwell Hardness)

OK 84.58 is a hardfacing electrode depositing a semi-corrosion-resistant martensitic steel. Full hardness is obtained even in the first bead, irrespective of the cooling rate. Suitable for hardfacing parts exposed to abrasive and impact wear, such as farm equipment, forestry tools, loading machines and mixers. Type Lime-basic Welding current: AC, DC+ OCV 65V Available in : 4.0mm x 1kg 3.2mm x 1.8kg 4.0mm x 4.6kg 5.0mm x 5.8kg

Price:£12.95£15.54

Esab ok 92.18 Cast to Cast Electrodes

Esab ok 92.18 Cast to Cast Electrodes

A nickel-cored electrode for welding normal grades of cast iron. The weld metal is soft and easily machinable. Deposition is performed on cold or slightly preheated material. The electrode is suitable for joining cast iron for the rectification of casting and the repair of broken parts. Type Basic-special, high graphite Welding current: AC, DC+ OCV 50V Available in: 2.5mm x 0.7kg 3.2mm x 0.8kg

Price:£59.25£71.10

Esab ok 92.58 Cast to Steel Electrodes

Esab ok 92.58 Cast to Steel Electrodes

A nickel-iron-cored electrode for joining normal grades of cast iron, such as grey, ductile and malleable irons. It is also suitable for the rectification and repair of these grades and for joining them to steel. Deposition is performed on cold or slightly preheated cast iron. The weld metal is stronger and more resistant to impurities than the nickel-cored type. Type Basic-special high graphite Welding current: AC, DC+ - OCV 50V Available in: 2.5mm x 0.7kg 3.2mm x 0.7kg

Price:£27.95£33.54

Esab OK Autrod 308LSi Stainless Grade 304/308 Solid Mig Wire

Esab OK Autrod 308LSi Stainless Grade 304/308 Solid Mig Wire

A continuous, solid, corrosion-resistant, chromium-nickel wire for welding austenitic chromium-nickel alloys of the 18 Cr-8% Ni type. OK Autrod 308LSi has good general corrosion resistance. The alloy has a low carbon content, making it particularly recommended where there is a risk of intergranular corrosion. The higher silicon content improves the welding properties such as wetting. The alloy is widely used in the chemical and food processing industries, as well as for pipes, tubes and boilers. Welding current: DC(+)

Price:£82.43£98.92

Esab OK Autrod 316LSi

Esab OK Autrod 316LSi

A continuous, solid , corrosion-resistant, chromium-nickel-molybdenum wire for welding austenitic stainless alloys of the 18% Cr -8% Ni and 18% Cr -10% Ni -3% Mo types. OK Autrod 316LSi has good general corrosion resistance; in particular, the alloy has very good resistance to corrosion in acid and chlorinated environments. The alloy has a low carbon content which makes it particularly recommended when there is a risk of intergranular corrosion. The higher silicon content improves the welding properties such as wetting. The alloy is widely used in the chemical and food processing industries, as well as in shipbuilding and various types of architectural structure. Welding current: DC(+)

Price:£120.95£145.14

Esab ok Autrod 5356

Esab ok Autrod 5356

OK Autrod 5356 is the most widely used welding alloy and can be classified as a general-purpose type filler alloy. OK Autrod 5356 is typically chosen because of its relatively high shear strength. The 5XXX alloy base material, welded with OK Autrod 5356, with a weld pool chemistry greater than 3% Mg and service temperatures in excess of 65°C, is susceptible to stress corrosion cracking. The alloy is non-heat treatable. Welding current: DC(+)

Price:£51.95£62.34

Esab OK Tig Rod 309 Tig Wire

Esab OK Tig Rod 309 Tig Wire

OK Tigrod 309L is a bare, corrosion-resistant, chromium-nickel welding rods for welding the 24% Cr, 13% Ni alloyed types of steel. OK Tigrod 309L has a good general corrosion resistance. When used for joining dissimilar materials the corrosion resistance is of secondary importance. Tig Wire

Price:£32.95£39.54

Esab OK Tigrod 12.62 Mild Steel

Esab OK Tigrod 12.62 Mild Steel

A triple desoxidized copper-coated rod designed for GTAW of mild and fine grained structural and pressure vessel steels as well as shipbuilding steels. The rod is capable of producing high quality welds in semi-killed and rimmed steel as well as steel of various carbon levels. Because of added desoxidants, Al-Ti-Zr, the rod can also be used for welding steels with a rusty or dirty surface without any sacrifice of weld quality. OK Tigrod 12.62 GTAW Type Carbon-manganese Welding current - DC(-) Mild Steel Low Alloy Tig Wire Available in 1.6 mm x 5kg 2.4 mm x 5kg

Price:£23.50£28.20

Esab OK Tigrod 16.30 Stainless Steel

Esab OK Tigrod 16.30 Stainless Steel

A triple desoxidized copper-coated rod designed for GTAW of mild and fine grained structural and pressure vessel steels as well as shipbuilding steels. The rod is capable of producing high quality welds in semi-killed and rimmed steel as well as steel of various carbon levels. Because of added desoxidants, Al-Ti-Zr, the rod can also be used for welding steels with a rusty or dirty surface without any sacrifice of weld quality. OK Tigrod 16.30 GTAW Type Carbon-manganese Welding current - DC(-) Mild Steel Low Alloy Tig Wire Available in 1.6 mm 2.4 mm

Price:£41.95£50.34

Esab OK Tigrod 308L Stainless Steel

Esab OK Tigrod 308L Stainless Steel

A triple desoxidized copper-coated rod designed for GTAW of mild and fine grained structural and pressure vessel steels as well as shipbuilding steels. The rod is capable of producing high quality welds in semi-killed and rimmed steel as well as steel of various carbon levels. Because of added desoxidants, Al-Ti-Zr, the rod can also be used for welding steels with a rusty or dirty surface without any sacrifice of weld quality. OK Tigrod 308L Available in 1.6 mm x 5kg 2.4 mm x 5kg

Price:£37.95£45.54

Esab OK Tigrod Grade 4043 Aluminium

Esab OK Tigrod Grade 4043 Aluminium

OK Tigrod 4043 is one of the most widely used welding alloys. It is used for welding AlMgSi types and AlSi alloys with up to 7% silicon. Not recommended for anodising. Non-heat treatable. OK Tigrod 4043 GTAW Welding current - AC Aluminium grade NG21 Available in 1.6 mm x 2.5kg 2.4 mm x 2.5kg

Price:£22.10£26.52

Esab OK Tigrod Grade 5356 Aluminium

Esab OK Tigrod Grade 5356 Aluminium

OK Tigrod Grade 5356 Aluminium GTAW Welding current - AC Aluminium grade NG6 Available in 1.6 mm x 2.5kg 2.4 mm x 2.5kg 3.2 mm x 2.5kg

Price:£20.21£24.25

Esab OK46.00 6013 Rods

Esab OK46.00 6013 Rods

Murex ok46.00 electrodes 1.5mm x 2.0kg 2.0mm x 2.1kg

Price:£37.50£45.00

Esab Origo Mag Power Source C171

Esab Origo Mag Power Source C171

The OrigoTM Mag C171 is a step regulated welding power source for MIG/MAG welding. A built-in wire feeder and the low weight of the units make them perfect, practical solutions for use on farms, in repair shops and for light production applications. Includes Torch & Free Automatic Welding Mask Origo™ Mag C171 MXLTM 200 3 m (contact tip 0,8) assembled feed roller 0,6-0,8 3m mains cable with plug, 3m return cable with clamp, gas hose 1,5m, shelf for gas cylinder, attachment chain for gas cylinder, instruction manual. OrigoTM Mag C171 Origo™ External dimensions, LxWxH, mm 860x 420 x 730 Weight, kg 59 Enclosure class, protection IP 23 Mains supply, V/Hz 230 1ph 50/60 Fuse, slow, A 16 Max output at 20% duty cycle, A 170 Max output at 60% duty cycle, A 98 Max output at 100% duty cycle, A 76 Open circuit voltage, V 22,5 - 44,5 Power factor at max current 0,91 Setting range, A 30 - 170 Wire feed, m/min 1-17 Interval/spot welding 0,2-2,5

Price:£695.00£834.00

Esab Origo Mag Power Source C201

Esab Origo Mag Power Source C201

The OrigoTM Mag C201 is a step regulated welding power source for MIG/MAG welding. A built-in wire feeder and the low weight of the units make them perfect, practical solutions for use on farms, in repair shops and for light production applications. Includes Torch & Free Automatic Welding Mask Origo™ Mag C201 MXLTM 200 3 m (contact tip 0,8) assembled feed roller 0,6-0,8 3m mains cable with plug, 3m return cable with clamp, gas hose 1,5m, shelf for gas cylinder, attachment chain for gas cylinder, instruction manual. OrigoTM Mag C201 Origo™ External dimensions, LxWxH, mm 860x 420 x 730 Weight, kg 68 Enclosure class, protection IP 23 Mains supply, V/Hz 230 1ph 50/60 Fuse, slow, A 20 Max output at 20% duty cycle, A 200 Max output at 60% duty cycle, A 115 Max output at 100% duty cycle, A 90 Open circuit voltage, V 19,6 - 44,9 Power factor at max current 0,89 Setting range, A 30 - 200 Wire feed, m/min 1-17 Interval/spot welding 0,2-2,5

Price:£865.00£1,038.00

Esab Origo Mag Power Source C251

Esab Origo Mag Power Source C251

The OrigoTM Mag C251 is a step regulated welding power source for MIG/MAG welding. A built-in wire feeder and the low weight of the units make them perfect, practical solutions for use on farms, in repair shops and for light production applications. Includes Torch & Free Automatic Welding Mask Origo™ Mag C251 MXLTM 200 3 m (contact tip 0,8) assembled feed roller 0,6-0,8 3m mains cable with plug, 3m return cable with clamp, gas hose 1,5m, shelf for gas cylinder, attachment chain for gas cylinder, instruction manual. OrigoTM Mag C251 Origo™ External dimensions, LxWxH, mm 860x 420 x 730 Weight, kg 94 Enclosure class, protection IP 23 Mains supply, V/Hz 230 1ph 50/60 Fuse, slow, A 35 Max output at 20% duty cycle, A 250 Max output at 60% duty cycle, A 140 Max output at 100% duty cycle, A 110 Open circuit voltage, V 19,0 - 41,5 Power factor at max current 0,92 Setting range, A 40 - 250 Wire feed, m/min 1-9-19 Interval/spot welding 0,2-2,5

Price:£1,035.00£1,242.00

Esab Origo Mig 410

Esab Origo Mig 410

The Origo™ Mig 410 is a step-regulated power source for MIG/MAG welding designed for heavy-duty applications. It is 40 voltage-step unit available as an air-cooled version. Weight, kg: 144 Mains supply, V/Hz: 400-415 Fuse, slow, A: 20 Mains cable, Ø mm²: 4x2,5 Max output at 50% duty cycle, A: 400 Max output at 60% duty cycle, A: 365 Max output at 100% duty cycle, A: 280 No load power, W: 360 Open circuit voltage, V: 17-45

Price:£2,500.00£3,000.00

Esab Origo Mig C151

Esab Origo Mig C151

The Origo™ Mig C151is the ideal welding machines for the less complex welding application, but where a high quality result is of the uppermost importance. Step regulated welding power sources with a built-in wire feeder. These low weight units are perfect, practical solutions for farmers, repair shops and light production applications. Torch included Each machine is equipped with the ergonomically designed, gas-cooled torch, MXL™ 150v. The MXL™ 150v is delivered with a 2.5 m cable and is permanently connected to the power source. Optimum cooling of the torch gives an extended life to the swan neck and the wear parts. Three different version of gas nozzle are available, standard, straight and conical for maximum flexibility. Mains voltage , V, Hz 230 1ph 50/60 Fuse, A-slow 10 Auto fuse (MCB) EN 60898 type D, A 16 Permitted load at 20% duty cycle, A 100 25% duty cycle, A 83 60% duty cycle , A 54 100% duty cycle , A 42 Setting range (DC) , A 35 - 130 Open circuit voltage , V 18,7 - 25,1 Open circuit power , W 75 Power factor at maximum current 0,91 Wire feed speed, m/min 2,0 - 14 Wire diameter, mm Fe, Ss 0,6 - 0,8 C 0,8 Al 1,0 CuSi 0,8 Voltage steps 4 Inductance outlets 1 Polarity change YES Dimensions l x w x h, mm 650 x 300 x 550 Weight, kg 25 Operating temperature, °C -10 to +40 Enclosure class IP 23 Application classification S

Price:£445.00£534.00

Esab Origo Mig C340 PRO

Esab Origo Mig C340 PRO

The Origo™ Mig C280 PRO/ PRO are step-regulated compact power sources for MIG/MAG welding. They are designed for light- to medium-duty applications. The Origo™ Mig C340 PRO is a 40 voltage-step unit. The operator can adjust wire-feed speed and select 2- or 4-stroke control and creep start. Strong, galvanised metal casing and built-in wire feeder make both units practical, mobile solutions. Weight, kg: 114 Max output at 30% duty cycle, A: 340 Max output at 60% duty cycle, A: 250 Max output at 100% duty cycle, A: 195 No load power, W: 240 Open circuit voltage, V: 16-40 Setting range, A: 40-340 Wire feed, m/min: 1,9-20 Wire Ø, unall. solid: 0,6-1,2 Wire Ø, SS: 0,6-1,0 Wire Ø, Al: 1,0-1,2 Wire Ø, CW: 1,0-1,2

Price:£2,375.00£2,850.00

Esab Origo Mig L405

Esab Origo Mig L405

The Origo™ Mig L405 is a switch step power source, designed for use with the Origo™ Feed L304 wire feed unit. The machines are designed for use in a wide range of general fabrications applications. Low investment costs Robust, step-controlled MIG/MAG units 40 voltage steps 4-rolls wire feed mechanism 5m cable set Galvanized sheet steel housing Digital volt/ammeter Fitted wheels

Price:£1,750.00£2,100.00

ESAB Origo™ Tech 9-13 Prepared for Air

ESAB Origo™ Tech 9-13 Prepared for Air

The Origo™ Tech 9-13 prepared for air is delivered fully assembled and ready to attach to an Origo™ Air unit. The unit includes: Origo™ Tech helmet, Origo™ Air unit, head gear, air duct & head and face seal. Battery powered respiratory unit. The unit provides clean, filtered air to increase the comfort and safety for the welder. The Origo Air is also equipped with a low flow alarm, which will give an audible signal when the filter is blocked or the battery power is running low. Light weight and durable.

Price was: £432.00£299.00£358.80

Esab OrigoMig C280 Pro Heavy Duty Welders Package

Esab OrigoMig C280 Pro Heavy Duty Welders Package

Special offer Buy this welder and get Warrior Tech Black Welding Helmet Curved Mig Gauntlets Wire Tool FREE Excellent welding properties - stable arc and very finely matched voltage steps Suitable for the welding of aluminium and GMA brazing of galvanized metal sheets Galvanized metal housing with optional air filter designed for use under rough conditions Two or three inductance connections - optimal arc dynamics Professional ESAB PSF™ torch included Simple polarity change - allows the use of solid wire and cored wire

Price:£995.00£1,194.00

Esab OrigoMig C340 Pro Heavy Duty Welders Package

Esab OrigoMig C340 Pro Heavy Duty Welders Package

Special offer Buy this welder and get Warrior Tech Black Welding Helmet Curved Mig Gauntlets Wire Tool FREE Excellent welding properties - stable arc and very finely matched voltage steps Suitable for the welding of aluminium and GMA brazing of galvanized metal sheets Galvanized metal housing with optional air filter designed for use under rough conditions Two or three inductance connections - optimal arc dynamics Professional ESAB PSF™ torch included Simple polarity change - allows the use of solid wire and cored wire

Price:£1,295.00£1,554.00

Esab PowerCut 1600

Esab PowerCut 1600

Powerful plasma cutting package for cutting up to 38 mm material thicknesses. For all types of heavy duty cutting and gouging within production, repair, maintenance and assembly. Use on all electrically conductive materials, e.g. mild steels, aluminium and stainless steels. This rugged, easy to use, power efficient unit, offers excellent cutting, piercing and gouging properties. It can also be adapted for mechanization. Runs off your mains supply together with compressed air or Nitrogen. External dimensions, LxWxH, mm706x322x379 Weight, kg 41 Enclosure class, protection IP23S Mains supply, V/Hz 400, 3~50/60 + -10% Fuse, slow, A 25 Mains cable, Ø mm2 4x6 Max output at 60% duty cycle, A90/115 Max output at 100% duty cycle, A 70/115 Open circuit voltage, V 280 Power factor at max current 0.72 Efficiency at max current 0.89% Air, l/min 236 Pressure, bar 6.2 Cutting capacity, Fe mm 38

Price:£3,495.00£4,194.00

Esab PowerCut 400 - Single Phase

Esab PowerCut 400 - Single Phase

Successful plasma cutting requires power, durability and simplicity. ESAB's PowerCut™ family delivers on all counts, thanks to high speed and thickness capabilities, high duty cycle ratings, simple set-up and operation, and enhanced consumable life. PowerCut™ also offers the lowest cost per meter of cut of any machine in this price class, plus outstanding productivity and performance. Cuts 10 mm (3/8 in) Severs 13 mm (1/2 in) External dimensions, LxWxH, mm465x160x340 Weight, kg14 Enclosure class, protectionIP23 Mains supply, V/Hz 90-280 / 50/60 Max output at 20% duty cycle, A30 Open circuit voltage, V250 Power factor at max current0,99 Setting range, A15-30

Price:£925.00£1,110.00

Esab PowerCut 700

Esab PowerCut 700

Designed with ESAB Plasmarc technology, PowerCut machines are more powerful and durable than any other machine in their class. Manually cuts 5/8 in. (15.9 mm) and severs 3/4 in. (19.0 mm) - powerful cutting performance Value priced - plasma cutting performance on a budget Compact lightweight design - easily taken to the job site Tool-less quick disconnect torch – Disconnects from the machine without the use of wrenches or special tools. Now you can easily disconnect your PT-39 for repairs or replacement, or to attach a PT-37 mechanized torch for mechanized applications Blowback technology - eliminates high-frequency startups that can disrupt CNC controls and nearby computer systems Generator friendly - compatible to work with generators when power is not accessible in the field Ergonomic torch design - lightweight, ergonomic handle provides maximum comfort when tackling those tough jobs Compact torch design - shorter front end allows maximum arc visibility and those hard to reach places Voltage booster - useful when finishing off thick material in ease. Also ideal for the inexperienced operator to cut in confidence Drag cutting capable - great for template cutting, straight edge cutting and first time users Grate cutting mode - maximize your productivity when cutting grate or mesh material Arrives fully assembled—ready to go out of the box

Price:£1,250.00£1,500.00

Esab PowerCut 900 25mm

Esab PowerCut 900  25mm

PowerCut™ 900 is made for all types of cutting within production, repair, maintenance and assembly. Use on all electrically conductive materials, e.g. mild steels, aluminium and stainless steels. This rugged, easy to use, power efficient unit, offers excellent cutting, piercing and gouging properties. It can also be adapted for mechanization. Weight, kg 35 Mains supply, V/Hz 400, 3~50/60 +-10% 230, 3~50/60 +-10% Fuse, Slow, A 16/25 Max output at 60% duty cycle, A 16/25 Open circuit voltage, V 290 Setting range, A 20-60 Air, l/min 236 Pressure, bar 6.2v Cutting capacity, Fe mm 25

Price:£2,795.00£3,354.00

Esab Pro Safety Spectacles

Esab Pro Safety Spectacles

Strong and durable yet flexible spectacles Sporty Style Soft to touch Lightweight wrap around Includes neck cord Flexible and durable Four different lens configurations. CE approved according to EN 166-F.

Price:£4.95£5.94

Esab Shield-Bright 308L Stainless 308 Grade Flux Cored Wire 1.2mm x 12.5kg

Esab Shield-Bright 308L Stainless 308 Grade Flux Cored Wire 1.2mm x 12.5kg

Shield-Bright 308L is a rutile flux-cored wire designed for the all-positional welding of stainless steels containing 18-20%Cr/8-12%Ni. In addition to the 304L and 308L varieties, it is also suitable for welding the stabilised 321 and 347 types. Shield-Bright 308L has excellent weldability on conventional non-pulsing power sources, using Ar/15-25%CO2 or pure CO2 shielding gas. The fast freezing slag supports the weld metal in positional welding, allowing deposition rates that can not be equaled by stick electrodes or solid wires (up to 4kg/h in PF, 3F position). It is a 'welder-friendly' wire, always operating in the favourable spray arc mode. The slag is self-lifting or easily detached leaving clean and flat welds with good penetration and a very smooth wetting onto the plate edges. Unlike solid wires, no silica islands are produced, therefore time is saved on cleaning the welds. This cored wire provides high X-Ray quality welds. One-sided root runs in open joints can be welded on ceramic weld metal supports at a very high productivity rate.

Price:£195.00£234.00

Esab Shield-Bright 309L Stainless 309 Grade Flux Cored Wire 1.2mm x 16kg

Esab Shield-Bright 309L Stainless 309 Grade Flux Cored Wire 1.2mm x 16kg

Shield-Bright 309L is a flux-cored, tubular wire depositing weld metal of the 309L type for use in all welding positions. Apart from joining these steels, the weld metal ferrite content ensures that it is suitable for dissimilar applications, as well as joining difficult-to-weld steels. Shield-Bright 309L has excellent weldability on conventional non-pulsing power sources, using Ar/15-25%CO2 or pure CO2 shielding gas. The fast freezing slag supports the weld metal in positional welding, allowing deposition rates that can not be equaled by stick electrodes or solid wires (up to 4kg/h in PF, 3F position). It is a 'welder-friendly' wire, always operating in the favourable spray arc mode. The slag is self-lifting or easily detached leaving clean and flat welds with good penetration and a very smooth wetting onto the plate edges. Unlike solid wires, no silica islands are produced, therefore time is saved on cleaning the welds. This cored wire provides high X-Ray quality welds. One-sided root runs in open joints can be welded on ceramic weld metal supports at a very high productivity rate.

Price:£365.00£438.00

ESAB Ski Goggle Shade 5

ESAB Ski Goggle Shade 5

The special injected frame offers supreme user comfort as well as durability. Expanded Visual field. Cross Vent technology keeps air flowing in and moisture out. Moulded 2mm poly carbonate lens provides great impact protection. These goggles meet ANSI Z87.1+ impact standard. ESAB Revolution UVIR Shade 5 is CE certified in addition to EN 169:2002 Optical Radiation Welding

Price:£9.00£10.80

ESAB Spatter Shield

ESAB Spatter Shield

The ESAB Spatter shield prolongs the lifetime of the welding shroud and contact tip. Size: 250ml

Price:£5.71£6.85

Esab Spectacle Aerosol Cleaner Spray 50ml

Esab Spectacle Aerosol Cleaner Spray 50ml

Spectacle Cleaner Finger pump-action, spray on and wipe off with microfiber cloth for the cleanest lenses you can imagine. Safe non-solvent.

Price:£2.75£3.30
Price:£349.00£418.80

Esab Tig Professional Gauntlets

Esab Tig Professional Gauntlets

A quality TIG gauntlet with a reinforced thumb and 13cm long leather cuff. CE approved. Cat. 2. Tested against mechanical stress such as abrasion, cut, tear and puncture Tested for thermal performance such as exposure to an open flame, contact heat, convective heat, radiant heat, small and large splashes of molten metal

Price:£7.15£8.58

Esab Tig Supersoft Gauntlet

Esab Tig Supersoft Gauntlet

Exclusive TIG-welding glove made of goatskin with seams KEVLAR stitched The gunn cut straight thumb makes it easy to grip different objects The leather cuff is 13 cm long and the absence of an index finger seam increases the flexibility The dexterity is extremely good. Fully welted. Cat. 2. Tested against mechanical stress such as abrasion, cut, tear and puncture Tested for thermal performance such as exposure to an open flame, contact heat, convective heat, radiant heat, small and large splashes of molten metal

Price:£2.95£3.54

Esab Tip Adaptor

Esab Tip Adaptor

Tip Adaptor

Price:£11.65£13.98

Esab Tubrod 14.13 Metal Cored E70c-6m Mig Wire 1.2mm x 16kg

Esab Tubrod 14.13 Metal Cored E70c-6m Mig Wire 1.2mm x 16kg

OK Tubrod 14.13 is a tubular wire particularly suited to the rapid welding of fillet and butt joints in the flat and horizontal positions. The arc action is stable at all current levels, which results in an excellent weld appearance with the absence of undercut and spatter. Welding current: DC+

Price:£55.30£66.36

Esab Tubrod 15.17 Metal Cored E81T1-NI1-6m Mig Wire 1.2mm x 16kg

Esab Tubrod 15.17 Metal Cored E81T1-NI1-6m Mig Wire 1.2mm x 16kg

OK Tubrod 15.17 is a tubular wire particularly suited to the rapid welding of fillet and butt joints in the flat and horizontal positions. The arc action is stable at all current levels, which results in an excellent weld appearance with the absence of undercut and spatter. Welding current: DC+

Price:£60.90£73.08

Esab Venus Shade 5 Safety Spectacles

Esab Venus Shade 5 Safety Spectacles

Spectacles with shade 5 for welding inspection, profiling and brazing. The wrap around shape gives maximum coverage to the eye. These spectacles have adjustable temple arms and abrasion-resistant lenses. CE approved according to EN 166-F and EN 175

Price:£6.00£7.20

ESAB Warrior 400i with Warrior Feed 304

ESAB Warrior 400i with Warrior Feed 304

The ESAB Warrior 400i comes with the ESAB Warrior Feed 304 Warrior™ by ESAB - the breakthrough welding machine you need to expand your skills. Warrior was designed with input from real-world welders and built with ESAB's leading-edge engineering to be a machine that's as rugged and reliable as you are. Multi-Process – including MIG, Flux-Cored, Stick, Live TIG and Arc Gouging gives you the flexibility at work: Flux-Cored and Solid wire, 0.8 -1.6 mm. Carbon Arc Gouging up to 9.5 mm (3/8 in.). 6010 (cellulosic) capability. High Duty cycle – For long runs and various applications giving high productivity. Durable and rugged – IP23 rating for outdoor and indoor use in rough environment. Easy to use – Simple and clear user interface for everyone to get started quickly. Robust and ergonomic handles – Also for mechanical lifting. Sun friendly display – easy to read outdoor. Inverter technology – Smaller, lighter and less energy cost, gives you value for money. Generator compatible – For flexible use in different job sites. Automatic Hot Start/Variable Arc Control – To support your different demands. Wide input voltage range to support regional requirements. SCT Technology give you an automatic burnback function that after every stop leaves the wire-end in perfect shape ready for next start. The TrueArcVoltage™ System, in combination with an ESAB PSF™ torch, guarantees that you will weld with the correct arc voltage independent of any voltage drop in the welding cables. This means that you will get the same arc voltage and weld result regardless of whether you are using a short connection cable or extended cables with up to a 35 meter working radius. Power On/Off Digital Volt/Amp Meter VRD LED Over Temperature LED Output Voltage / Current Control Welding Process Selector Stick Mode Selector Inductance/Arc Force Control Wire feeder control connector Resettable Circuit Breaker Output Power Connectors Mains Supply, 3 ph 50/60HZ, V 380-415, +/-10% Mains cable, Ø mm2 4 x 6 Fuse, slow A, 25 Maximum load at: 100% duty cycle A/V, 3ph 300/32 60% duty cycle A/V, 3ph400/36 Setting range A MIG/MAG16-400 MMA5-400 TIG 5-400 Open circuit voltage, V 54 Idle Power, W120 Efficiency at max. current %88 Power factor at max current 0.92 Enclosure class IP23 Dimensions LxWxH mm712x325x470 Weight, kg 52 Operating Temperature, °C -10 - +40 Application classS The new user friendly and robust feeder. Rugged design – handle, connectors for tough use. 4 roll drive with tach feedback – for superior wire feeding. Sun-friendly display – easy to read outdoor. Bobbin cover – included standard feature for protection. Voltage Pre-set – support the setting of welding parameters.

Price:£2,495.00£2,994.00

ESAB Warrior Tech Helmet

ESAB Warrior Tech Helmet

The WARRIOR™ Tech helmet has been designed to meet the needs of a variety of welders, providing a high tech lightweight shell to protect from heat, sparks and spatter, The welding lens gives a high clarity of view, resulting in an excellent optical quality utilising the latest ADF technology. The WARRIOR™ Tech helmet provides ideal functionality, performance and comfort to the occasional welder, maintenance and construction workers through to the professional welder. ADJUSTABLE - To extend from 6 ½’’ up to 9’’ ADJUSTABLE PUSH RACHET - For better fit and comfort LONGITUDINAL ADJUSTMENT - 3 longitudinal adjustments to increase field of vision ENHANCED COMFORT - Angled front pad sits flat on forehead, reducing frontal lobe pressure 5 POINT RAKE - Adjusting the position of helmet to 5 different angles Available with dioptre configurations as standard

Price:£65.00£78.00

Esab Welding Ankle Boot

Esab Welding Ankle Boot

Hard & flexible ankle boot . Lightweight & Comfortable Vented inner Canbrella for improved respiration Water, Oil & Spark Proof Velcro Fastening Wide opening for easy access Soft collar padding for protected ankles XXL Steel toe cap Steel midsole High protection PU2D sole resisting temp 180°C Safety Excellent grip SB : Basic requirement (innocuousness, comfort, solidity, resistance to crush and shock : 200 J and protection against slipping fall risks ). S1 : SB + Close back part + Antistatic + Shock absorbing heel S2 : S1 + Water resistant upper S3 : S2 + Penetration resistant midsole + Sole with cleats

Price:£52.00£52.00

Esab Welding Rigger Boot

Esab Welding Rigger Boot

Hard & flexible rigger boot Lightweight & Comfortable Leather inner lining Water, Oil & Spark Proof Wide for easy access XXL Steel toe cap Steel mid-sole High protection PU2D sole resisting temp 180°C Excellent grip Safety SB : Basic requirement (innocuousness, comfort, solidity, resistance to crush and shock : 200 J and protection against slipping fall risks ). S1 : SB + Close back part + Antistatic + Shock absorbing heel S2 : S1 + Water resistant upper S3 : S2 + Penetration resistant midsole + Sole with cleats

Price:£72.50£72.50

Powercut 650 Electrode Pack of 5

Powercut 650 Electrode Pack of 5

Pack of 5 electrodes For Esab Powercut 650

Price:£46.75£56.10

Powercut 650 Nozzle (5)

Powercut 650 Nozzle (5)

Nozzle for Powercut 650 For Esab Powercut 650 Sold in packs of 5

Price:£24.75£29.70

Powercut 650 Nozzle Shield

Powercut 650 Nozzle Shield

Nozzle Shield For Esab Powercut 650

Price:£24.80£29.76

Powercut 650 Swirl Baffle Ring

Powercut 650 Swirl Baffle Ring

Swirl Baffle Ring For Esab Powercut 650

Price:£15.95£19.14