All Murex Tradesmigs are step-controlled Mig Welding power sources with integral fully enclosed wire feed units. They are designed for welding steel, stainless steel, aluminium and they can also be used for brazing. Wires ranging from 0.6mm to 1.2mm in diameter can be used depending on the machine selected.
The units are equipped with multi-step voltage control switches and potentionmeters for wire feed adjustment and easy setting of welding parameters. All four machines are fan cooled and equipped with thermal overload protection.
Comes with Torch and Free Auto Mask- Compact, single phase, Mig composite for the light duty fabrication industry.
- Easy polarity change allows the use of both conventional solid wire and self shielding cored wire.
- Accurate control and setting of wire feed speed and welding parameters.
- Power Smoothing DeviceTM available as standard for enhanced performance.
- Adjustable spot weld and burn back timer.
- Supplied with an MXE Mig torch.
Comes with Torch and Free Auto Mask- Mains Voltage 230-240V, 1~50/60Hz
- Permissible load at:
100% duty cycle 110A/19.5V
60% duty cycle 140A/21V
30% duty cycle 200A/24V
25% duty cycle ---
20% duty cycle 250A/21V
- Setting Range (DC) 40A/16V-200A/24V
(250A/21V) - Open circuit voltage 19-41.5V
- Open circuit power 200W
- Power factor at max load 0.92
- Control Voltage 42V,50/60Hz,
- Wire feed speed 1.9-19m/min
- Burnback time - 0-2.5s
- Spot welding - 0.2-2.5s
- Welding gun connection EURO
- Wire dimension range 0.6-1.2 (Fe) 1.0-1.2 (Al) 0.8-1.2 (cored) 0.8-1.0 (CuSi)
- Max diameter/weight of wire bobin 300mm/15kg
- Dimensions L x W x H 860 x 420 x 730mm
- Weight 92kg
- Operating temperature -10 to +40°C –
- Enclosure class IP23
- Application class S
